- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Invidia Q300 Cat Back Exhaust Titanium Tips
Subaru WRX/STI Sedan 2011-2014
Features & Product Details
RallySport Direct proudly carries a large selection of quality high-performance master-crafted exhaust options brought to you by Invidia.
This is the Invidia Q300 Cat-Back Exhaust System. The Q300 is a highly coveted exhaust system among enthusiasts because it gives them everything they want in terms of a performance upgrade. You get premium fabrication using quality materials that are combined with machined welds. The design features very smooth radius bends with an increase in piping diameter to allow for an unobstructed flow path for the exhaust to escape. And the beautiful polished finish right out of the box will check all the aesthetic boxes to provide the rear of your vehicle with a pronounced look. The final result will provide the user with a nice increase in power and torque, and improvements in the throttle response. The most rewarding aspect is the race-inspired sound. From mild bolt-ons to full builds, the Invidia Q300 will change the character of your vehicle to make your driving experience much more enjoyable.
DETAILS:
NOTE:
Product Video
Specifications
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Installed this on my 2011 wrx. Great exhaust and basically no drone. Sounds and looks really great I had no problems with the instillation and I did not use an adapter/doughnut gasket and I do not have any leaks. Although the OEM gasket was basically just 100% solid rust. Make sure you get all of it off and get a flat surface for the new flat gasket. All in all, sounds really cool and not too loud. Very very cool :)
I have this exhaust mated to the Invidia Catted DP. The sound is amazing. Performance is great. The fitment is OK, no clearance issues under the car or contact with the bumper. The height in the rear is good. But the left/right and rotation of the pipes beginning at and after the 'Y' was noticeably off. Almost as if the rotation at and after the 'Y' was off by a few degrees. This caused the left tips to stick out more than the right along with the tip alignment in the rear bumper spaces. Took an hour of labor at a good local shop to get it sorted out. I don't expect perfection on a retail dual exhaust, but for ~1000 bucks I expect the imperfections to be barely noticeable.
Sounds awesome, perfect pitch. It got rid of all the drone from the stock exhaust. I dont like loud exhausts but even I was surprised how quiet this is. But if you plan to go turboback I think the volume will be perfect after a downpipe. Just wanted to let others know that if this exhaust smokes a bit when its new, its because its burning off residue in the exhaust. No need to worry.
This is what I've been looking for. Quality build for this exhaust system is top notch and that iconic Subaru boxer rumble sound brings me so much joy in my heart. Really happy with the purchased. Thanks RSD.
Everyone likes the quad tip... it sounds (resonated) way better than stock but is comfortable for distance if you care about that sort of thing. wakes up a little if you open up the rest of the pipes. Now the important stuff: welds are probably robo because they are perfect. bends are nice and smooth. Shes a little heavy, but look at those cans! -tip alignment is a pain, but doable -dont forget hanger bushings (please dont do the extended) -it may be quieter than you think or want... Then again I am deaf and have no problem driving a straightpiped sbc for hours with broken windows I am happy with it, and its plenty loud when you open it up. if only it were lighter
QUESTIONS & ANSWERS
-
Q: Invidia q300 Dex4 years ago
Looking to put the invidia q300 on my 2015 forester 2.5. Will this work?
-
-
0 of
0 people found the
following answer helpful
A: This part is not confirmed to fit your car.
Michael N.Was this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: New Gaskets? Napalmsteak5 years ago
-
-
0 of
0 people found the
following answer helpful
A: You will be able to use any universal exhaust gaskets. Just make sure that you measure your gaskets before ordering
Luis L. @ RallySport Direct 5 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Does it fit perfectly BrakoQc6 years ago
-
-
0 of
0 people found the
following answer helpful
A: Nothing else is required to install this catback onto your OEM downpipe. Everything will fit like OEM and using the OEM downpipe to 3 inch catback adapter will help ensure a leak free seal.
Connor M. @ RallySport Direct 6 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Q300 A1_Cardoza6 years ago
-
-
0 of
0 people found the
following answer helpful
A: Unfortunately, the Nameless Axle-back (Muffler Deletes) are only compatible to the OEM Y-Pipe.
Brady R @ RallySport Direct 6 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Invidia Q300 exhaust and DP Sthornton6 years ago
-
-
0 of
0 people found the
following answer helpful
A: The hardware to connect this to the downpipe will be included with this catback and you would only need to purchase the Turbo-Downpipe Gasket to complete the install.
Brady R @ RallySport Direct 6 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
