- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Invidia 3in Downpipe to 2.5in Exhaust Adapter
Subaru WRX/STI 2008+ / Forester 2004-2010
Product Resources
Features & Product Details
RallySport Direct proudly carries a large selection of quality high-performance master-crafted exhaust options brought to you by Invidia.
This is the Invidia 3-Inch Downpipe To Stock Cat-Back Exhaust Adapter. This adapter will allow you to adapt the tail-end of a 3-inch downpipe to your stock, or a 2.5-inch cat-back exhaust system. This will ensure a proper mating fitment between the two exhaust components to ensure for a proper exhaust flow without any exhaust leaks.
DETAILS:
Specifications
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Good welds with decent thickness. Gasket and spring bolts seem to be of good quality. Worth it. Doesn't come with donut gasket which will be needed for installation.
the gasket that comes with it does not already come on the 3" side. It needed a little modification to get it to fit. required cutting a v-notch to stretch it over the adapter. Overall a nice kit that comes with the much needed springs, nuts, and bolts.
The reason why this kit is much better than others is that it comes with slightly longer spring bolts to account for the adapter's added thickness in the downpipe-to-catback connection.
QUESTIONS & ANSWERS
-
Q: Reverse Fitting Zesti2 years ago
Would this work from OEM downpipe to 3 inch midpipe, have the other adapter but is not a good fit
-
-
0 of
0 people found the
following answer helpful
A: This would not be ideal for that.
Lane H. @ RallySport Direct 2 years agoWas this answer helpful? -
0 of
0 people found the
following answer helpful
A: This would not be ideal for that.
Lane H. @ RallySport Direct 2 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Spring Bolts Carlos3 years ago
-
-
0 of
0 people found the
following answer helpful
A: Honestly I doubt these are much longer than OEM. They are likely slightly longer, but not by much. If yours is off by just a bit these should work, but you might be better off using generic exhaust hardware. Thanks
Rick C. @ RallySport Direct 3 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Spring Bolts Carlos3 years ago
-
-
0 of
0 people found the
following answer helpful
A: Honestly I doubt these are much longer than OEM. They are likely slightly longer, but not by much. If yours is off by just a bit these should work, but you might be better off using generic exhaust hardware. Thanks
Rick C. @ RallySport Direct 3 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Will it work? OEM3 years ago
-
-
0 of
0 people found the
following answer helpful
A: No, and you should not need an adapter at all for that connection, that should be a direct bolt on. Thanks!
Rick C. @ RallySport Direct 3 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Nameless midpipe Matt4 years ago
-
-
0 of
0 people found the
following answer helpful
A: Correct this will connect them together, you would also need a donut gasket part# (020099)
Edson C. @ RallySport Direct 3 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
