SET YOUR CAR
FREE SHIPPING
On orders over $100
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

DEI Titanium Exhaust / Header Wrap 2in x 50ft

MODEL # DEI010127

$51.59


  • Q: Question   Mike3 months ago

    Is this basicaly turbo blanket
    • 0 of 0 people found the following answer helpful

      A:  This is not a turbo blanket, this is exhaust heat wrap and will not work on a turbo charger.

      Jared A. @ RallySport Direct 3 months ago  
        
      Was this answer helpful?
  • Q: Motorcycle Exhaust  wickedXicon1 year ago

    Will this steam when it gets wet like fiberglass wrap does?
  • Q: Sealant  Rsti-Typera3 years ago

    Would it be useful to add a coat of thermo tec sealant over this?
  • Q: Wrap  Jey3 years ago

    Is 50x2 enough to cover my header, uppipe and haflway downpipe with no over lapping.
    • 0 of 1 people found the following answer helpful

      A:  Very doubtful, typically it takes at least 50' just to do a header on Subaru's.

      dans
        
      Was this answer helpful?
  • Q: Heat wrap  AwScooby034 years ago

    Does this specific heat wrap contain asbestos in any way shape or form?
    • 1 of 2 people found the following answer helpful

      A:  This titanium wrap does not contain any asbestos.

      guest57853c642a8d25b5018c44a7 @
        
      Was this answer helpful?
  • Q: Does this come with the stainless zip ties?  speedgsx98600215 years ago

    Wondering if this comes with the stainless ties, or if they need to be purchased separately?
  • Q: Amount of wrap  Charlie Tango5 years ago

    How many feet would it take to wrap headers, uppipe, and half of the downpipe on a 07 Legacy?
    • 1 of 1 people found the following answer helpful

      A:  That depends on how much overlap you do. Typically a downpipe will take most of a 50'x2 roll. Headers depend heavily on the brand and header design. You can typically expect to use about a 50'x2 roll to do something like the Perrin or Tomei header.

      Kirill C. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: Silicon Spray  jamesy5 years ago

    It says you dont require a silicon spray coating but is it bad to do so? How does it protect against oil, dirt and road grime?
    • 0 of 0 people found the following answer helpful

      A:  The material in the Titanium series is less prone to absorbing moisture by material fabric design. So there is no need to coat it. You can and there would be no downside to doing so, but the benefit would not be nearly as large as the standard wrap.

      Kirill C. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: Wrapping cat on downpipe  MAXG265 years ago

    should i wrap the cat on my invidia downpipe or leave it unwrapped?
    • 0 of 0 people found the following answer helpful

      A:  I would recommend leaving it unwrapped, if wrapped it can cause overheating and break down the internal components inside rendering it useless.

      Kyle A. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: 50ft enough for header?  badratz564696 years ago

    IS a rool 2inchX50ft enough to wrap my stock JDM 2004 STI headers? or do I need more?
    • 0 of 0 people found the following answer helpful

      A:  It should be enough for the headers and a good majority of your downpipe if you have not wrapped that yet.

      Nick S. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: Wet or Dry  chepaprios SubSTi7 years ago

    Do i need to wet this wrap?
    • 0 of 0 people found the following answer helpful

      A:  According to the instructions on DEI's website you do not wet the titanium wrap at all. http://www.designengineering.com/files/pdfs/install/ins043-titaniumexhaustwrap.pdf

      Tanner S. @ RallySport Direct 7 years ago  
        
      Was this answer helpful?
  • Q: Wet or Dry  m1k1e201757 years ago

    I've seen people apply their heat wraps wet so that it'll get tighter after drying out. What about this particular one as it is titanium?
    • 0 of 0 people found the following answer helpful

      A:  According to the instructions on DEI's website you do not wet the titanium wrap at all. http://www.designengineering.com/files/pdfs/install/ins043-titaniumexhaustwrap.pdf

      Tanner S. @ RallySport Direct 7 years ago  
        
      Was this answer helpful?
  • Q: How much?  DrewPat7 years ago

    Will one roll of this be enough to cover my Invidia v3? And will there be any extra left? Say enough to wrap my Grimmspeed uppipe? :D
    • 1 of 1 people found the following answer helpful

      A:  This 50' roll should be plenty to wrap your downpipe and depending on how you wrap it, there should be enough to also do an uppipe.

      Zach G. @ RallySport Direct 7 years ago  
        
      Was this answer helpful?
  • Q: Wrapping a DP  J_Maher_WRX7 years ago

    If I were to use this wrap to cover an Invidia Catless DP, would it still be necessary to use a heat shield?
    • 0 of 0 people found the following answer helpful

      A:  It would still be recommended to run a heat shield because the turbo itself emits a good amount of heat. :)

      guest561671092a8d25a1658c55d3 @
        
      Was this answer helpful?