SET YOUR CAR
As low as 0% APR Financing
FREE SHIPPING
On orders over $200
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts
DEI Titanium Exhaust / Header Wrap 2in x 50ft ( Part Number:DEI 010127)

DEI Titanium Exhaust / Header Wrap 2in x 50ft - Universal

MODEL # DEI 010127
Manufacturer Part # 010127

$47.77

MSRP: $68.24

24
hours
In stock! Ships same day
Free shipping on all orders over $200.00!

Description

Underhood temperatures can get really overwhelming.  Especially if you have upgraded any of your factory exhaust components. With that said, your factory exhaust components have designed heat shields that naturally protect surrounding elements. If you upgraded your header,  up pipe, or even upgraded your turbo system to a rotated kit, then it’s always a good idea to wrap these exhaust components with a proper heat wrap.

DEI’s Titanium Wrap is constructed from pulverized lava rock, extruded into fibers and then woven into a tight weave which gives this material titanium-like strength and toughness. This improvement in thermal protection helps reduce underhood temperatures, and protect surrounding engine components like the oil filter, water lines, and anything else that can be subjected to heat exposure. 

This wrap can withstand up to 1800°F direct and 2500°F in intermittent heat, and will be sold in a 2" by 50 ft section. 

SHARE THIS
| | | | |

Specifications


Brand: DEI
Installation Hardware Included: No
Length: 50ft
Width: 2.00in

Mfgr. Warranty: 30 Days
Condition: New Product
Return Policy:

RallySport Guarantee - 30 Days


Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.

RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.

The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
Standard

PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED

5

5 STAR
96%
4 STAR
4%
3 STAR
2 STAR
1 STAR
Verified Purchase

Great product, Worth the money!
MoMarkusz 1 year ago
I had to end up buying 2 50 x 2in rolls of this stuff to cover my downpipe, up-pipe and headers just enough and it works great, keeps heat from radiating other parts and keeps the heat inside, smoked for like 2-3 days and still kind of smells when I run the car hard and heat up the pipes well but works great. Install took a solid 3 hours for all pipes but was well worth it when done, I used the metal locking ties to tie them up, didn't need the tool just some pliers to keep curling the metal band when it was inserted. Great product would buy again but was a good amount of time to wrap nice and tight. Strands also go everywhere on the frayed ends so be careful, I just super glued a line and cut in between to keep the strands from going everywhere.
Comment

Great product
rahul 3 years ago
excellent product really keeps heats down around engine bay
Comment

Great stuff - pretty easy to use
fischer84603 3 years ago
so straight up this stuff is great. I have some experience wrapping custom headers and exhausts using traditional fiber glass and copper stuff. Used this to wrap a bellmouth downpipe for my 2013 wrx. Pros: easier to use than fiberglass because it doesn't require gloves or soaking. Easy to cut (I used Kevlar shears). Looks great and seems pretty durable after 3k miles including a rally day. Cons: this stuff frays like crazy after you cut it! I used a piece of wide masking tape to seal the cut end each time I cut a piece before wrapping it. One downside of not soaking it in water like fiberglass is it doesn't shrink fit to the pipe so be sure to wrap it tight the first time! Great product and very happy. I will be using the 1 in to wrap my uppipe and header soon
Comment

great product
sykotik 3 years ago
Looks great wrapped around my invidia divorced down pipe
Comment
Verified Purchase

WOW buy this
Rexed 4 years ago
I have used both this and the fiberglass I like both but this feels smoother and you dont need to wet this stuff just wrap it and use stainless steel hose clamps like I did.
Comment

  • Q: Sealant  Rsti-Typera 2 years ago

    Answer

    Would it be useful to add a coat of thermo tec sealant over this?


    • A: Coating is not needed with Titanium wrap.


      Josh P. 2 years ago
  • Q: Wrap  Jey 2 years ago

    Answer

    Is 50x2 enough to cover my header, uppipe and haflway downpipe with no over lapping.


    • A: Very doubtful, typically it takes at least 50' just to do a header on Subaru's.


      dans 2 years ago
  • Q: Does this come with the stainless zip ties?  speedgsx9860021 4 years ago

    Answer

    Wondering if this comes with the stainless ties, or if they need to be purchased separately?


    • A: You will want to purchase them separately.


      Kyle A. 4 years ago
  • Q: Amount of wrap  Charlie Tango 4 years ago

    Answer

    How many feet would it take to wrap headers, uppipe, and half of the downpipe on a 07 Legacy?


    • A: That depends on how much overlap you do. Typically a downpipe will take most of a 50'x2 roll. Headers depend heavily on the brand and header design. You can typically expect to use about a 50'x2 roll to do something like the Perrin or Tomei header.


      Kirill C. 4 years ago
Universal Product
This item is non application specific.
Please verify compatibility before purchase. May require some modification for proper installation.