

GrimmSpeed Subaru VF Turbo Wastegate Bracket
Subaru Legacy GT 2005-2009
Features & Product Details
This is the Grimmspeed VF Turbo Wastegate Bracket. This component has been designed to make your life much, much easier than having to take your turbocharger off and have your buddy try to weld it shut with his derpy welding skills. The problem with this method is that you really risk the welding beads coming part and completely destroying the turbocharger. The other problem is that you can't reverse this if you get the wastegate welded.
The Grimmspeed unit is a basic bolt-in solution that takes about 5 minutes to install. Once installed you don't have to worry about the wastegate door opening, and you can revert it back to stock if you wish to do so.
Made for models that come equipped with the VF turbocharger.
Specifications
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
QUESTIONS & ANSWERS
-
Q: VF-40 (05-07 LGT) only? Or does also it fit VF-46 (08-09 LGT). KirkB2 years ago
I read a review on GrimmSpeed's website saying this bracket is only for the VF-40 (05-07 LGT only), not the VF-46 (08-09 LGT). Is this true? Or does it also fit the VF-46 turbos? Thanks!
-
-
0 of
1 people found the
following answer helpful
A: This bracket is specific to the VF40 Turbo, which came in the 2005-2009 Subaru Legacy GT.
Brady R @ RallySport Direct 2 years ago -
0 of
0 people found the
following answer helpful
A: If this bracket does not fit the VF-46 turbo then it cannot work for all LGT model years from 05-09, because the 08-09 LGTs did not come with VF-40 turbos. The VF-40 only came on the 05-07 LGTs, while the 08-09 LGT uses the VF-46.
KirkB @
-
0 of
1 people found the
following answer helpful
-
Q: VF48 on a 2005 WRX. Abel Conce5 years ago
im making ma homework cause i want to swap to EWG setup with a 38mm Tial. Should i buy one? Thanks.
-
-
0 of
0 people found the
following answer helpful
A: An internal wastegate blockoff bracket like this will be required to switch to an external wastegate setup.
Nick S. @ RallySport Direct 5 years ago
-
0 of
0 people found the
following answer helpful
-
Q: Fitment on VF52 in LGT c.t.berg238959 years ago
I'm about to swap a VF52 into my Legacy GT and I'll be running an EWG, I was looking at this bracket to hold my IWG closed but was wondering if I get the Legacy specific one here b/c I have a LGT, or do I get the standard one b/c my turbo is from a 2011 WRX?
-
-
1 of
1 people found the
following answer helpful
A: Hello, The fitment only pertains to the turbo. The standard vf bracket should work with your vf52. Mike
GrimmSpeed
-
1 of
1 people found the
following answer helpful
-
Q: VF52 hockeyfan199 years ago
Is this the correct bracket for the VF52 (2011 WRX)?
-
-
1 of
1 people found the
following answer helpful
A: This bracket is specifically for the Legacy GT VF turbo. The 2008+ WRX turbos will still use the standard GrimmSpeed VF bracket, part number: GRM 010001.
Tanner S. @ RallySport Direct 9 years ago
-
1 of
1 people found the
following answer helpful