SET YOUR CAR
FREE SHIPPING
On orders over $200
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

Subaru OEM Oil Galley Plug

MODEL # SUB 11024AA210

$9.72


  • Q: OEM oil adapter   1LoudSTI1 year ago

    Will an 04 STI OEM oil pressure sensor fit this adapter ? Needed a new one since mine is leaking not sure what type thread OEM sensor has
  • Q: Defi sensors  Blackbugeye2 years ago

    Doyou have one that you would recommend
    • 0 of 0 people found the following answer helpful

      A:  Killer B Motorsports makes a great one and it is part KIL OEMPT. Please just post that part number in the search bar and it will pull right up!

      Brady R @ RallySport Direct 2 years ago  
        
      Was this answer helpful?
  • Q: Oil Pan  tartarus0010090213 years ago

    Does this plug fit the oil pan (for temp gauge) or do I need to find another plug. Also, does it need a different gasket then the one that already comes with my oil filters looks just like the ring style gasket that you guys sell), that I order from Subaru?
    • 0 of 0 people found the following answer helpful

      A:  This is not going to fit the oil pan, this is meant to fit on the block like underneath the alternator. SUB 037018200 is the part number for the galley plug gasket.

      Nick S. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Thread size and pitch?  Hunter9513 years ago

    Hi what are the thread sizes for the gallery thread and inner thread... ?
  • Q: How many  2011 WRX STI3 years ago

    can we fit 2 of these on an Ej257 for oil temperature and oil pressure?
    • 0 of 0 people found the following answer helpful

      A:  Your engine comes with one of these adapters for the stock oil pressure sensor, and you can add one more for an aftermarket oil pressure sensor. If you plan on using aftermarket oil pressure and temperature sensors, then we recommend installing the temp sensor in the oil pan and pressure sensor on the engine, or use both in a sandwich plate adapter.

      Zach G. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: where is it located?  STI dude4 years ago

    I have some defi guages and id like to add an advance bf oil press and temp to my setup. Where would I find this plug so I can install these?
    • 0 of 0 people found the following answer helpful

      A:  There are multiple pre-tapped locations on the stock block. The most common location is located behind/underneath the alternator! Thank you!

      Sterling W. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: Torque Spec  jagdeepgrewal4 years ago

    What is the torque spec for this plug?
    • 0 of 0 people found the following answer helpful

      A:  Torque specs will be the same as the OEM galley plug but unfortunately we do not have these available. It is likely to be 20-30ft/lbs but it would be best to verify with the dealer or a service manual.

      Nick S. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: Will I need something different?  Shawn4 years ago

    So originally I ran the mishimoto sandwich block adapter to run my AEM oil pressure gauge. Since installing it became more of a nuisance to adjust and re adjust with each oil change, not to mention I think after my long hauls in the road from Alaska to Minnesota fried the wires. I'm skeptical that it's reading correctly because the pressures were way off from when I originally installed it. Had the oil pressure checked out after I blew the turbo and they were still normal. So my question is do I get this or something else that has the 1/8 NPT threads like I need? Like the killer b motorsports plug? Any help from anyone would be awesome. Just want to get my gauge back in the fight again. Oh, and the only location I was able to route from the sandwich plate was right over the headers...yeah...hot is an understatement.
    • 0 of 0 people found the following answer helpful

      A:  As you mentioned, you will need a properly threaded plug to install the sensor. As you mentioned, Killer B offers a plug converting the 1/8PT to 1/8NPT, which you will need. Thank you!

      Sterling W. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: AEM oil gauge   Rexed5 years ago

    Will this work with AEM oil Pressure gauge?
    • 0 of 0 people found the following answer helpful

      A:  This galley plug will not be a direct fit with the AEM oil sensor because the AEM sensor is 1/8NPT and the threads in this plug are 1/8PT.

      Zach G. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: PT vs NPT  Erikbrockhoff616026 years ago

    Is Pt the same as NPT? I have a 1/8 NPT sender from prosport. Will this work?
    • 1 of 1 people found the following answer helpful

      A:  Pipe Thread (PT) and National Pipe Thread (NPT) are different. The sender thread pitch will have to match the galley plugs thread pitch to work without any issues. Thank you.

      Sterling W. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: Galley Plug ?  spdkills836 years ago

    Let me see if I have this correct. All I need to be able to run a oil pressure gauge is this plug correct? It replaces a galley plug then you just thread your sensor in run power to the gauge and you are done correct? Also does it need a gasket or a washer of some sort? Thanks
    • 1 of 1 people found the following answer helpful

      A:  This galley plug can be used to install an oil pressure sensor that has 1/8 PT threads. The installation of the gauge itself will vary depending on the gauge, but for most basic gauges you are correct. A gasket is required and you can find that on our site using part number SUB 037018200.

      Zach G. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: Hard to find, but exactly what you need.  KornShaDoW0977 years ago

    So why do people not use the stock oil pressure sender and use an aftermarket one? Is there a certain level of psi that isn't measured by stock sensors?
    • 1 of 1 people found the following answer helpful

      A:  The stock sending unit is quite simple, its either you have oil pressure or you dont. When you get the signal saying you have no oil pressure its already to late and damage has already been done. By doing an aftermarket gauge you are able to better monitor engine operations and lubrication level along with any possible unforeseen issue prevention

      Kirill C. @ RallySport Direct 7 years ago  
        
      Was this answer helpful?
  • Q: where exactly  warlord_x697 years ago

    where exactly do i install it?
    • 0 of 0 people found the following answer helpful

      A:  There are 3 different locations you can put this galley plug. You will have 2 on the front upper portion of the engine, and 1 more on the passenger side, near the bellhousing, under the intercooler. They can be a bit tricky to find, so a search on google for Subaru OEM Galley location should yield results. Thanks.

      Rick C. @ RallySport Direct 7 years ago  
        
      Was this answer helpful?