SET YOUR CAR
FREE SHIPPING
On Orders of 99+.
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

IAG V3 Top Feed Fuel Rails Red

MODEL # IAGIAG-AFD-2102RD

$199.99


  • Q: Stock injectors  ghostrida32 years ago

    will stock injectors fit this rail?
    • 0 of 0 people found the following answer helpful

      A:  IAG has confirmed fitments for OEM STI Blue injectors, you will need to use the included small spacers marked with an S.

      Lane H. @ RallySport Direct 2 years ago  
        
      Was this answer helpful?
  • Q: IAG Fuel Rail Damper  Chad09wrx3 years ago

    What is the thread gauge for the damper?
    • 1 of 1 people found the following answer helpful

      A:  that is a 3/8 NPT fitting and a plug is included with the rails if you don't want to run a damper. Thanks!

      Rick C. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Complete Set  Rex4eva 3 years ago

    I am looking to change to the top feed and plan to purchase the IAG braided line kit as well. Is there anything else I will need?
    • 1 of 1 people found the following answer helpful

      A:  If you're going to get the top feed TGV's you'll just want to make sure you have the upper and lower gaskets for the TGV's, other than that the rails, injectors, and fuel line kit should give you everything you need for a complete install along with a tune of course :) Let us know if you have any other questions. Thanks, Rick

      Rick C. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Fitment on OEM fuel lines?  GioLaz3 years ago

    Will this fit the OEM fuel lines? Or do i have to upgrade?
  • Q: Fitment on OEM fuel lines?  GioLaz3 years ago

    Will this fit the OEM fuel lines? Or do i have to upgrade?
    • 0 of 0 people found the following answer helpful

      A:  You will need to add the IAG Fuel Line kit for your vehicle.

      Tylo R @ RallySport Direct
        
      Was this answer helpful?
  • Q: Fitment on OEM fuel lines?  GioLaz3 years ago

    Will this fit the OEM fuel lines? Or do i have to upgrade?
    • 0 of 0 people found the following answer helpful

      A:  You will need to add the IAG Fuel Line kit for your vehicle.

      Tylo R @ RallySport Direct
        
      Was this answer helpful?
  • Q: fitment for 2011 wrx  qsbullock4 years ago

    will these rails work with the COBB flex fuel kit that is made for my 2011 wrx, I planned on running stock rails would I see any major benefit with these? building an iag stage 2.5 tuff aiming for 350whp and similar torque numbers.
    • 0 of 0 people found the following answer helpful

      A:  You would see benefit with these, it would have better flow and allow you to run a parallel fuel line setup. It will require custom lines to hook up to the flex fuel sensor.

      Marcus E. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?