Bundle Savings:MSRP: $124.99
AEM’s High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps.
The AEM High Flow In-Tank Fuel Pump (PN 50-1000) flows 320 lph (84 gph) at 43 PSI and is capable of supporting over 1,000 HP at 43 PSI.
AEM High Flow In-Tank Fuel Pump Features:
Designed for high output naturally aspirated and forced induction EFI vehicles
- In-Tank design
- Tested to flow 320 lph @ 43 PSI
- 39mm diameter fits most applications
- Offset inlet design eases installation
- Each pump individually tested
- For gasoline vehicles (pump life may be diminished when used with E85 fuel)
- Kit includes fuel pump, rubber sleeve and end caps, pre-filter, hose, clamps and flying lead
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
AEM High flow In- Tank fuel pump
glyne 3 years ago
This pump does what its made to do. Works well a bit noisy but provides sufficient fuel for my 1000cc ID injectors
awangard.motors35013 4 years ago
Not a bad fit , had to do some trimming to pump housing , total time to Instal- 40min. I woild rate it as Quiet pump
Dylan crow 4 years ago
Have had the pump for less than 2 months and it has gone bad. Has been acting up for the last month.
Great replacement for my Walboro
dsnuts02 5 years ago
Great replacement for my Walboro. So quiet and easy to replace!!
QUESTIONS & ANSWERS
Q: Aem for 2003 Wrx Leo 9 months agoAnswer
I have a 2003 Subaru Wrx JDM engine 2.0l .. with Cobb stage 3 tune and Sti pink injectier .. do I need pro tune to use this pump after install? Or I will just be good to install n go with it ?
A: Tuning is not required when changing to a larger flow fuel pump.
Evan M. 9 months ago
Q: AEM fuel pump Leo 10 months agoAnswer
Can I use just regular 93 super gas on it ? Or it has to be E85 ? For 2003 Subaru Wrx JDM engine Ej20
A: This AEM pump will also work well with 93 pump gas.
Evan M. 10 months ago
Q: Evo X fitment issues bigdmasterp 3 years agoAnswer
A: That is the COBB fuel pump holder, part number COB 352010 and it is available on our site.
Nick S. 3 years ago
Q: AEM 320 Evo x 3 years agoAnswer
does this pump will work on a Evo x.
A: This is a universal fit pump and will require modification to your vehicle's fuel pump housing.
Nick S. 3 years ago
Q: Running nitrous Jake 3 years agoAnswer
I have a 14 brz I have the nitrous kit hooked up I want to run a small shot of nitrous probably like a 50-70 shot . I have 750cc injectors and a better fpr, will this pump be able to support the nitrous shot ?
A: This pump can spray more fuel than your injectors would allow. You should have no fueling issues with this 320LPH pump.
Connor M. 3 years ago
This Part Fits
This item is non application specific.
Please verify compatibility before purchase. May require some modification for proper installation.