SET YOUR CAR
FREE SHIPPING
On orders over $100
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

Aeromotive Fuel Pressure Regulator ORB-6

MODEL # AER 13109

$179.26


  • Q: Rails and fuel lines.   dgalupar569362 years ago

    is this compatible with with stock fuel rails and stock fuel lines? if not, what is compatible with this? I'm running ID1000, and will use Aeromotive fuel filter. whats the benefit?
    • 1 of 1 people found the following answer helpful

      A:  No,it is not directly compatible with stock fuel lines/connections. You would require conversion adapters to AN-06 lines to connect to the regulator. Benefits include adjustable pressure and better flow/pressure control.

      Jared A. @ RallySport Direct 2 years ago  
        
      Was this answer helpful?
  • Q: FPR  wrxmaniac22222222 years ago

    SO, when would you need to upgrade the stock FPR?
    • 0 of 0 people found the following answer helpful

      A:  Typically it will be common to upgrade the stock Fuel Pressure Regulator when the build require more fueling. Please note that any aftermarket FPR will require tuning.

      Brady R @ RallySport Direct 2 years ago  
        
      Was this answer helpful?
  • Q: Perrin fuel rails  danyole4 years ago

    Would this work with my perrin fuel rails?
  • Q: STi Stumble  quick.banana314664 years ago

    Will protuning be required when I add this to my stock fuel system? (I have the STi stumble and I've been advised adding an aftermarket FPR will remove it) Also, can I use the stock fuel lines when installing this or will I need a whole new set up?
    • 0 of 0 people found the following answer helpful

      A:  A pro-tune is required when altering your fuel pressure. Stock lines will not work and you will need to adapt your current fuel system for this item.

      Stevens Henager @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: Damper  thatonesti5 years ago

    Does this have internal fuel dampers?
    • 0 of 0 people found the following answer helpful

      A:  Hello, this unit has an internal spring that dampens pressure spikes. It is sealed by a ball and poppet assembly which is pressed into a diaphragm.

        
      Was this answer helpful?
    • 1 of 1 people found the following answer helpful

      A:  Hello, this unit has an internal spring that dampens pressure spikes. It is sealed by a ball and poppet assembly which is pressed into a diaphragm.

        
      Was this answer helpful?
  • Q: Aeromotive   ccaro6 years ago

    I only have a fuel pump walbro 255 lph but my injectors are OEM. I need a aeromotive a fuel regulator?
    • 0 of 0 people found the following answer helpful

      A:  A aftermarket FPR is much more consistant compared to stock regulators so many tuners prefer them to be installed on cars. Is it needed for your set up? No Will you see a performance gain? No Will it make a more stable fuel delivery? Possible. On stock systems its not really needed, but once you start running larger injectors and start pushing your fuel system you will see a benefit to it.

      Kirill C. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: Requirement  nate6 years ago

    Is an aftermarket fpr required when going to larger injectors and larger fuel pump? I'm planning on running a 255LPH pump with ID 1000cc top fuel rail kit on my 04 STi, would this be a required item or good to have and couldn't hurt?
    • 2 of 2 people found the following answer helpful

      A:  A fuel pressure regulator is not necessary when upgrading your fuel pump and injectors, because your stock FPR can still control the fuel pressure. An aftermarket FPR will allow you to adjust the fuel pressure and is not necessary for your setup, but would not hurt.

      Zach G. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?