- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
-
Q: FPR WRXItalia3 years ago
This retains the stock FPR on the 2006 STi, but will it work with an AEM FPR as well?
-
-
0 of
0 people found the
following answer helpful
A: If the AEM FPR will work in place of the stock one, then it should work with this kit,
Lane H. @ RallySport Direct 2 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: 05 Sti with DW Fuel Rails Japetto5 years ago
-
-
0 of
0 people found the
following answer helpful
A: These are meant for the Injector Dynamics fuel rails only and are not guaranteed to work elsewhere.
Luis L. @ RallySport Direct 5 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Fitment with Areomotive FPR Jack6 years ago
-
-
1 of
1 people found the
following answer helpful
A: These will pair up perfectly to the Areomotive FPR.
Jared A. @ RallySport Direct 6 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: ID side feed conversion line kit Garethhasansti6 years ago
-
-
0 of
0 people found the
following answer helpful
A: The fittings and lines are ID lines.
Jared A. @ RallySport Direct 6 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Compatibility mrsilva21436 years ago
-
-
1 of
1 people found the
following answer helpful
A: These fuel lines are compatible with e85.
Ben L. @ RallySport Direct 6 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: Parallel vs. Series itzzshawn7 years ago
-
-
0 of
0 people found the
following answer helpful
A: You would end up not using most of the items in this kit and if you would like to run the rails in parallel, you are better off building the kit from scratch.
Chris W. @ RallySport Direct 7 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Fuel Lines StarryBoar7 years ago
-
-
0 of
0 people found the
following answer helpful
A: If you are referring to the Injector Dynamics Part # IND 1000.18.01.48.14.4, then yes this would work with those.
Brady R @ RallySport Direct 7 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Compatibility... TURBOTOD8 years ago
-
-
1 of
1 people found the
following answer helpful
A: This line kit is compatible with the Injector Dynamics side feed conversion rails and injectors (IND 1000.18.01.48.14.4), and the OEM fuel pressure regulator can also be used.
Zach G. @ RallySport Direct 8 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: lengths of fuel lines? xhengmanx8 years ago
-
-
0 of
0 people found the
following answer helpful
A: Hope this helps! (2) 6AN lines, 30” long, 90° hose ends (1) 6AN line, 12” long, 90° hose ends (4) 6AN to 6AN-ORB adaptors (2) 6AN to 5/16 barb adaptors (1) 3’ section of 5/16 fuel injection hose (4) 5/16 hose clamps
Tommy M. @ RallySport Direct 8 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Pictures of product installed? .Boston.8 years ago
-
-
0 of
0 people found the
following answer helpful
A: Unfortunately we do not, it is quite crowded in the engine bay with these installed and difficult to display.
Nick S. @ RallySport Direct 8 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Fitment? CG_sti8 years ago
-
-
0 of
0 people found the
following answer helpful
A: Unfortunately we cannot confirm or guarantee fitment with other kits we have not tested, but these are a -6AN fitting and should fit.
Nick S. @ RallySport Direct 8 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Aftermarket fpr flipout1478 years ago
-
-
2 of
2 people found the
following answer helpful
A: With a couple fitting changes this will fit an aftermarket regulator. Exactly what is needed will depend on the regulator and regulator placement, but it'll just be a matter of sorting the one line that goes to the regulator.
Injector Dynamics @ Injector Dynamics 8 years agoWas this answer helpful? -
1 of
1 people found the
following answer helpful
A: These lines can be used with an aftermarket fuel pressure regulator, but you may need an adapter or fitting to connect to the FPR.
Zach G. @ RallySport Direct 8 years agoWas this answer helpful?
-
2 of
2 people found the
following answer helpful
-
Q: Is this parallel or series lines? hermanbaggins7849910 years ago
-
-
0 of
0 people found the
following answer helpful
A: The lines and fittings do not allow for a parallel configuration with this kit. It could be done, but would require some additional work and parts by the end user.
Injector Dynamics @ Injector Dynamics 10 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Fuel Lines Butterfingerboyx5223410 years ago
-
-
2 of
2 people found the
following answer helpful
A: These are actually made from a lightweight black nylon fiber outer braid over a durable rubber core, designed to hold pressures in excess of 300psi. This kit is compatible with all fuel types.
Nick S. @ RallySport Direct 10 years agoWas this answer helpful?
-
2 of
2 people found the
following answer helpful
