SET YOUR CAR
FREE SHIPPING
On Orders of 99+.
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

IAG Braided Fuel Line and Fitting Kit For Aftermarket FPR

MODEL # IAGIAG-AFD-2202

$279.99


  • Q: Aftermarket FPR  beans2 years ago

    Will this kit fit the radium fpr?
  • Q: Fuel rails   2012 sti3 years ago

    Can this part go with my IAG V3 top feed fuel rails? And my 1050X Cobb injectors?
  • Q: FUEL TYPE  Austen_ej23 years ago

    Are these IAG fuel lines e85 compatible?
    • 0 of 0 people found the following answer helpful

      A:  In recent years various fuel manufacturers may have added any number of new unpublished additives to their fuel blends. Due to this fact it is very difficult for hose manufacturers to know how the inner liner of their elastomeric tube compounds will react with a given fuel. Because of these unknowns we are unable to guarantee that the hoses we provide are the best possible products to use with any specific fuel. The most commonly reported issue being a fuel odor that permeates from the hose.

      IAG Performance @ IAG Performance 3 years ago  
        
      Was this answer helpful?
  • Q: Plug and play?  Bryan343 years ago

    Do these lines come with the fittings already on or are they just separate lines and the fittings have to be mounted to them?
  • Q: Lines  ajszurek258124 years ago

    Do these lines replace the entire length from the pump? Or just under the hood?
    • 0 of 0 people found the following answer helpful

      A:  This kit will only cover the underhood part.

      Michael N.
        
      Was this answer helpful?
  • Q: Aftermarket FPR or Stock?  adventures914 years ago

    I have the Tomei Fuel Pressure Regulator Type-S and was wondering if this kit or the stock one is the correct one for fitment with the tomei fpr or does neither have the correct fitting.
    • 0 of 0 people found the following answer helpful

      A:  So Tomei includes a couple of different sets of fittings with the Type-S FPR. The -6AN inlet/outlet fittings that come with the Type-S should work with this kit.

      Marcus E. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Aftermarket FPR or Stock?  adventures914 years ago

    I already have a Tomei Fuel Pressure Regulator and am getting iag fuel rails do I want the fuel line kit for an aftermarket FPR or stock or do neither have the fitting for the Tomei FPR.
    • 0 of 0 people found the following answer helpful

      A:  So Tomei includes a couple of different sets of fittings with the Type-S FPR. The -6AN inlet/outlet fittings that come with the Type-S should work with this kit.

      Marcus E. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Parallel Fuel Line??  Rivera.agr4 years ago

    Will this kit allow the fuel lines to be upgraded to a parallel set-up?
  • Q: IAG fuel lines with Cosworth fuel rails  akmattj 4 years ago

    Will the IAG fuel lines work with Cosworth fuel rails? Or will only the IAG fuel rails work with these lines?
    • 0 of 0 people found the following answer helpful

      A:  It would only confirmed to work with the Iag rails, however, if cosworth uses the same fittings, you would be able to use those as well.

      Devan M. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: fuel line length  Subie_Zack4 years ago

    what is the length of fuel line included with this kit?
    • 0 of 0 people found the following answer helpful

      A:  Unfortunately, we would not be able to confirm the length, however it should be plenty for the application

      Devan M. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?