Toggle navigation Toggle navigation
Back Sign In
 SET YOUR CAR
Buy Now, Pay Later! Starting at 0% APR
FREE SHIPPING
On orders over $100
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts
Free Shipping on Orders Over $100 - 5 Days left to receive your parts by Christmas!

Injector Dynamics Fuel Injector PnP Adapter USCAR to Denso

MODEL # IND 90.3

$15.00

View Product

  • Q: ID PNP   David2 months ago

    I have a 2005 sti with ID 1050 will this product fit?

  • Q: 2016 WRX  Kinvesu1 year ago

    Are these what I need to change my fuel injectors size for the 2016 wrx? Been looking forever for info on how to upgrade the injectors.
    • 1 of 1 people found the following answer helpful

      A:  Unfortunately, the 15+ WRX or the FA20 does not have an injector upgrade as they fuel injectors are not the limiting factor for the OEM fuel system. The limiting factor is the High-Pressure Fuel Pump which starts to become a restriction around 400WHP-450WHP on Gasoline. Sadly there is no upgrade for this pump at this time.

      Jared A. @ RallySport Direct 1 year ago  
        
      Was this answer helpful?

  • Q: Fitment '04 wrx  '16 sti1 year ago

    will this fit 1050cc ID injectors on an '04 wrx?

  • Q: 06 wrx  hoonzoloS14913652 years ago

    Will these fit my 06 wrx with id 1000cc injectors or do I need uscar to Subaru adapters instead of uscar to Denso?

  • Q: 2003 evo 8  Vich3 years ago

    Will this fit both plugs for ID 1000cc plug to the stock plugs for my 2003 evo 8 injectors?

  • Q: Injector dynamics 1000cc injector adapters  mottooomann13 years ago

    Do I need to buy 4 adapters for each of my injectors?
    • 0 of 0 people found the following answer helpful

      A:  These are sold in a single quantity so you would need to purchase however many injectors your vehicle requires them for.

      Nick S. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?

  • Q: Side feed to top feed:  Kenmichi3 years ago

    Will these adapters allow my stock side feed engine harness to plug in top feed injectors? 2004 STI.
    • 0 of 0 people found the following answer helpful

      A:  These are meant to adapt ID injectors to the factory wiring harness. They are not extensions for the factory harness.

      Brady R @ RallySport Direct 3 years ago  
        
      Was this answer helpful?

  • Q: will these work with 2005 sti  gallusa7113 years ago

    will these PnP adapters work with the 1300cc top feed conversion kit for the 2005 Subaru STI and which fuel pressure regulator would be compatible with this!?
    • 0 of 0 people found the following answer helpful

      A:  These are compatible with the top feed conversion kit. Also, the factory fuel pressure regulator can still be used.

      Brady R @ RallySport Direct 3 years ago  
        
      Was this answer helpful?

  • Q: Use with ID1300 injectors?  Mintyfloss3 years ago

    Can I use these with 1300cc ID injectors, or is there another model number.

  • Q: How many?  bpaverill083793 years ago

    Will I need to order 4 of these individually to use on the 4 injectors or is only 1 required?

  • Q: Fitment for 06 wrx  Squishypitbull891973 years ago

    Will these work with ID1000's in for a 06wrx?
    • 0 of 0 people found the following answer helpful

      A:  These are the adapters you will want to use with ID1000s on Subaru models.

      rickriflifkin
        
      Was this answer helpful?

  • Q: side feed conversion  j.flores05sti4 years ago

    I am in the process of changing over to top feed id850s from stock 2005 sti side feed. I bought the injectors off different website but does not come with adapters. will these work ?

  • Q: fitment to '15 sti?  spyounger416704 years ago

    will these fit my Id1000cc injectors to my 15 sti regardless of where my car was built? why does it say to confirm fitment befor ordering?
    • 0 of 0 people found the following answer helpful

      A:  This is a universal product and may fit a variety of vehicles and is marked as such. We have used these on the 2015 STI with 1000cc Injector Dynamics without a problem.

      Nick S. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?

  • Q: ID 1000cc  harte4 years ago

    Will these work for my 14 wrx non sti?

  • Q: Upgrading to ID1300  DaneSTi4 years ago

    Will i need these for my 06 Sti injector upgrade?
    • 0 of 0 people found the following answer helpful

      A:  These are not required and injector dynamics includes connectors in each injector kit but they would have to be wired into the existing harness. These adapters allow the installation to be a direct plug and play.

      Nick S. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  ID2000's will not require these, but all other Injector Dynamics injectors will if you want a PNP install. Otherwise you can hard wire in the connectors that are supplied with all ID injectors.

      Injector Dynamics @ Injector Dynamics 4 years ago  
        
      Was this answer helpful?

  • Q: fitment   tempemail55c52177caae52c4048b7f4d5 years ago

    Will these work with id1300cc injectors to fit my version 7 sti?
    • 0 of 0 people found the following answer helpful

      A:  These PnP adapters will work with the Injector Dynamics 1300cc injectors on most Subaru models, but we cannot guarantee fitment with vehicles outside the USA.

      Zach G. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?

  • Q: Injector Dynamics Fuel Injectors 2000cc ?  Caliman5 years ago

    Will these work with the injector dynamics 2000cc injectors?
    • 0 of 0 people found the following answer helpful

      A:  These adapters are not necessary for the 2000cc injectors on a Subaru because the connector on the injector will work with the stock connector.

      Zach G. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?

  • Q:  injector dynamics 1300cc injectors?  lanceb90766275 years ago

    Will these work with the injector dynamics 1300cc injectors?

  • Q: Fitment  mortenal926805 years ago

    Is this what is needed to connect the 1000cc injectors to a 2006 sti?
    • 0 of 0 people found the following answer helpful

      A:  These will adapt your stock injector wiring harness to the Injector Dynamics ID725/850/1000 injectors.

      Rick C. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?

  • Q: How many needed?  Killacush5 years ago

    Just to be sure, I would need 4 for a 11 STi?
    • 0 of 0 people found the following answer helpful

      A:  Yes, you would need 4 of these adapters for a 2011 STi.

      guest57853c642a8d25b5018c44a7 @
        
      Was this answer helpful?

  • Q: Are these the same as the old part ID 90.4?  Deek5 years ago

    I bought a set of ID 90.4 adapters a year ago, just went through a rebuild and lost one adapter in the process. Would this adapter function as a suitable replacement, or would I need to buy 4 new ID 90.3's?

  • Q: Fittment  Butterfingerboyx522346 years ago

    If I went with Injector Dynamics Top feed conversion for my 06 STI, Will these PnP Adapters Allow my car connect to the injectors i described?
    • 0 of 0 people found the following answer helpful

      A:  These adapters should allow you to fit the Injector Dynamics injectors to your vehicle without an issue.

      Nick S. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?