SET YOUR CAR
TALK TO A PARTS EXPERT
- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Product images
Product Media
Community Media
APR Carbon Fiber Front Wind Splitter
Subaru WRX/STI 2011-2014
Features & Product Details
RallySport Direct proudly carries a great selection of performance-oriented automotive carbon fiber aero components and accessories brought to you by APR.
On this page, you are looking at the APR Carbon Fiber Wind Splitter. This wind splitter has been designed to improve the aerodynamics by reducing lift and increasing the downforce at higher speeds.
Here are the details:
Notes:
Specifications
Brand:
APR
Adjustable:
No
Install Mounting Location:
Front
Installation Hardware Included:
Yes
Material:
Carbon Fiber
Mounts To:
Bumper
Oil Change Access:
No
Mfgr. Warranty:
1 Year
Condition:
New Product
Return Policy:
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
Standard
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
WARNING: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Customer Photos and Videos
Vapor Trail
The struts are too short to mount to the frame. other than that I like it
3 of 3 people found the following review helpful
asmith80414
Not happy with the lack of quality in instructions and hardware, but it functions well for the price. The splitter does work well, noticed a couple snaps came loose on one side of the bumper cover after some 100+mph testing. However, the support rods aren't long enough to reach any viable rigid mounting points like the bumper beam etc... Also, they should have included spacers and longer bolts for those without a lip to bolt to. The center section of a 08+ wrx/sti is raised, and would require you to pull it down, stress the bumper, to make it fit with the hardware given. I understand it being a custom application, but instructions could be done a lot better. They should at least include a drill template, suggested mounting points for the splitter, and suggested mounting points for the support rods. I have no clue where the rods would bolt to other than the bumper cover as short as they are. Also, they say it's as easy as lining the bumper cover up with the back of the splitter. It's not, if your not paying attention, you have a good chance of drilling more holes than you bargained for. The bumper cover is narrower in place than uninstalled; almost a 2 inch difference. So, measure twice cut once, don't mess it up. Also, unless you plan on removing it every oil change, trust me you don't want to, you are going to have to cut out at least a 5x5 section. I purchased a TBW aluminum undertray along with this splitter, and I will say it is a must because it has access panels and a lot more protection than the stock plastic one.
1 of 1 people found the following review helpful
Sage Kaneshige
Front splitter looks sick on MY12 WRX both functional and gorgeous carbon fiber really add to the front end of my car. Be weary that there are no holes for it to be mounted so you have to drill your own, I followed the pre-drilled holes in the bumper then added a few of my own, awesome product!
mrrexsti
this splitter is awesome. it does give you down force like it said it does. i have notice that it create so much down force that i have a gap between my bumper and fender so i have to some how reinforce it. but other then then that little issue. it make the car look track ready
QUESTIONS & ANSWERS
-
Q: 2014 Subaru WRX APR front splitter Johnny-o1 year ago
Can you measure this for me and tell me the width and length of it please.
-
-
0 of 0 people found the following answer helpful
A: The dimensions are 70.25" length x 25" width.
Jared A. @ RallySport Direct 1 year agoWas this answer helpful?
-
0 of 0 people found the following answer helpful
-
Q: Arp front splitter fitment Grant2 years ago
-
-
0 of 0 people found the following answer helpful
A: This is not confirmed to fit your vehicle so it is unlikely that it will fit.
Jared A. @ RallySport Direct 2 years agoWas this answer helpful?
-
0 of 0 people found the following answer helpful
-
Q: Splitter rods length reiementz571222 years ago
-
-
0 of 0 people found the following answer helpful
A: The 8mm Rods that are included are adjustable and will range from 6.125in - 8.75in
Brady R @ RallySport Direct 2 years agoWas this answer helpful?
-
0 of 0 people found the following answer helpful
-
Q: Frame mounts? luke.williamson74892152 years ago
-
-
0 of 0 people found the following answer helpful
A: This splitter mounts to the bumper and undercarriage of the car. Due to its construction, it is pretty solid. You will need to do some drilling to get it to fit.
Josh P. @ RallySport Direct 2 years agoWas this answer helpful?
-
0 of 0 people found the following answer helpful
-
Q: Installation STHYEEE3 years ago
-
-
0 of 0 people found the following answer helpful
A: There are no installation instructions for APR front wind splitters, and each installation will be custom. The splitter itself is specific to the car, but the mounting hardware is universal.
Zach G. @ RallySport Direct 3 years agoWas this answer helpful?
-
0 of 0 people found the following answer helpful
