SET YOUR CAR
FREE SHIPPING
On orders over $100
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

Cusco Power Brace Front Member

MODEL # CUS672 492 FMLHD

$223.52


  • Q: Fitment Question   Sergiod2 years ago

    Will this work with an Oswald lightweight front bumper beam?
  • Q: Does this work with OEM US front bumper beam?  CHENG0083 years ago

    Looking at description, it says that this part will not work with the factory bumper beam. However some of the reviews make it seem like it WILL work with it. Can you clarify please? My particular application is an 06 STi. Thanks in advance!
    • 0 of 0 people found the following answer helpful

      A:  Some trimming may be required. If anyone has had this fit without trimming, they could be on a JDM bumper. The US bumpers have different regulations and will more than likely require modification for this brace to fit.

      Chris W. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  Hi Chris, Thanks for that answer. Understood that the bumper piece will need trimming (aka the plastic parts). Just wanted to make sure that my safety is not compromised by having to remove the US safety beam (metal thing bolting to frame of car)? Hope that makes more sense...

      CHENG008
        
      Was this answer helpful?
  • Q: Fitment  Shane Hollis4 years ago

    I have a 2005 sti. Will this still fit with a front mount?
    • 0 of 0 people found the following answer helpful

      A:  We have not tested this brace with any front mounts but in most cases a front mount will not fit.

      Nick S. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: FMIC?  ZaronaeeK5 years ago

    would it be possible to fit a FMIC with this installed
  • Q: LHD specific?  Duncmang6 years ago

    The part number FMLHD, does that mean this will not fit on RHD vehicles? Thanks
    • 0 of 0 people found the following answer helpful

      A:  Yes we only have this confirmed for USDM vehicles at this time. I would imagine the JDM models may have different bumper mounts since the US regulations require a 5mph bumper, so this may mount differently on JDM models.

      Nick S. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: 05 WRX wagon fitment  Shikari7 years ago

    Would this fit a wagon or is it sedan specific, similar to how front sway bars are sedan specific?
  • Q: Front mounted oil cooler  ImThou8 years ago

    Does this power brace fits together with FM oil cooler kit? (eg. Greddy/HKS oil cooler)
    • 1 of 1 people found the following answer helpful

      A:  Cusco has not confirmed fitment with any front mount oil coolers. That being said one of the guys here ran that on his Impreza and said that it is a very tight fit and you probably will not be able to fit an oil cooler behind the brace, but possibly in front.

      guest561671092a8d25a1658c55d3 @
        
      Was this answer helpful?
  • Q: bumper beam  Chandler B.8 years ago

    what modification needs to be made to the bumper beam? Some people say you just need to do a little trimming and some say you need to get the JDM beam. Which one is it? Thanks!
    • 1 of 1 people found the following answer helpful

      A:  I personally installed this on my vehicle. I am not familiar with the JDM Bumper Beam but to get the OEM one to fit you would need to trim it, surprisingly not alot of trimming would need to be done :) Thanks

      Sterling W. @ RallySport Direct 8 years ago  
        
      Was this answer helpful?