- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Competition Clutch Lightweight Flywheel - Subaru STI 2004+
Manufacturer Part # 2-721-ST
$308.11
Bundle Savings:
MSRP: $395.01
$308.11
Bundle Savings:
MSRP: $395.01
Description
RallySport Direct is proud to carry the Competition Clutch Lightweight Flywheel. Lightweight Flywheels improve the performance because the lighter they are, the less rotational mass will be had at the crank. This means that you will have faster revs and improved engine response. This particular flywheel will work with all performance and stock clutch assemblies.
Here are more details:
- Qualities of the CCI Lightweight Steel Flywheel:
- Preserves low-end torque and driveability
- One piece ring gear for high durability
- Well suited for Stage 1 and Stage 2 clutch kit applications
- Stamped with 4140 plate with 2000 ton pressure at 1260 degrees
- CNC machined and balanced to O.E. specifications
- Weighs 15lbs
Meets and exceeds SFI 1.5
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
Specifications
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS
4.7
Good product some vibration at first
jeff1029074099 2 years ago
I have a light drive train, aluminum, drive shaft, Perrin vibration dampener, and this light flywheel. No codes and easy to takeoff from stop. No vibrations detected, when assembled by shop. Immediately drove on 1200mile trip. When very hot and taking off the clutch made large vibration. I think the mechanics that installed parts gunned it around town before I got it. I took it easy and it is close enough to stock quiet that I'm happy. Noticed some improved revs and some more performance.
Awesome
TheBatman9441 3 years ago
Had it for about 500 miles. Took a little getting used to in low RPMs and RPMs drop a little more between shifts.
Great flywheel
Brett.carlson33805153 3 years ago
I paired this with a Stage 3 CC clutch. I did notice more vibrations around 2700 rpms and up. Between shifts the rpms do drop a little quicker. It did make a little difference in low rpm drivability. Now with 1500 miles the vibrations have subsided and it's almost back to stock.
Nice
cherryflavoredtoiletpaper 4 years ago
No cel code, but you do have to rev it just a little higher to engauge, 200rpms max. Kinda a pain in stop and go traffic but I did the stage 2. Will update when It's broken in more.
Good product
Subiesuperlover 4 years ago
Lighter. Perfect fitment. Not too light to require heeltoe on daily drive
QUESTIONS & ANSWERS
-
Q: Fitment Justin 2 months ago
AnswerWill this work with an ACT extreme duty 6 puck?
-
-
A: This flywheel is only confirmed to fit Competition Clutch clutch kits. You will need to use ACT's flywheel with your ACT Extreme Duty 6 Puck.
Jared A.
2 months ago
-
-
Q: some info please Robbie0831 4 months ago
Answerim about to make a purchase for your CC stage 4 clutch kit. im currently stock and im not that concerned about it being rough till i modify my car but would this flywheel match well with CC stage 4 clutch kit? Thank you in advance for your response!
-
-
A: This will work well with the stage 4 kit, but puck clutches can be a bit more rough and tricky to drive, especially with a light flywheel. If your power goals are within their rating, Comp's Stage 2-3 kits will be a bit less harsh.
Marcus E.
1 month ago
-
-
Q: N/A vs Turbo zeus12237604602 2 years ago
AnswerGreetings. I noticed that they recommend this flywheel for use on N/A setups. Why is this? Can this be run on a turbo charged car? Thanks.
-
-
A: This flywheel is confirmed for the STi which has a turbo.
Chris W.
2 years ago
-
-
Q: resurfacing Ruger 2 years ago
AnswerCan this flywheel be resurfaced?
-
-
A: Yes, but resurfaced flywheels are sometimes known to slip. We would recommend purchasing a new flywheel.
Chris W.
2 years ago
-
-
Q: danyole 3 years ago
AnswerWill this work with the cc stage 5 4-puck?
-
-
A: This is confirmed for any OEM sized replacement clutch similar to the Competition Clutch Stage 5 4-puck unit.
Stevens Henager
3 years ago
-
