SET YOUR CAR
Buy Now, Pay Later!
FREE SHIPPING
On orders over $200
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

GrimmSpeed Turbo Heat Shield

MODEL # GRM 092002

$79.00


  • Q: Grimmspeed Turbo Heat shield  CyonaraSTI 1 month ago

    Will the Grimmspeed Turbo Heat shield fit a 2016 subaru Sti with a Cobb 3" downpipe?
  • Q: Grimmspeed heat shield   Kschmidte6 months ago

    Will the grimmspeed heat shield for my stock location Blouch 20g turbo setup?
    • 0 of 0 people found the following answer helpful

      A:  We can only confirm fitment of this heat shield on a stock setup, however, Grimmspeed does say that it fits most aftermarket turbos as well.

      Karsten B. @ RallySport Direct 4 months ago  
        
      Was this answer helpful?
  • Q: Fitment  Delano2 years ago

    Will I need to buy any extra brackets to replace my stock heatshield or will this directly replace stock heatshield?
  • Q: Does it fit RHD vehicles?  Anthony2 years ago

    Does this fit with RHD vehicles?
  • Q: 2016 STI  Panda3 years ago

    Would this possibly fit the 2016 STI?
    • 0 of 0 people found the following answer helpful

      A:  Fitment is likely the same for the 2015-2016 STI models but we have not test fitted and could not guarantee this to fit.

      Nick S. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: layering possible??  holeshotwrx3 years ago

    Is it possible to use this WITH the stock heatshield? (turbo permitting for some I'm sure, but I'm still on a td04) An extra 'layer' of resistance can't hurt, right??
    • 0 of 0 people found the following answer helpful

      A:  This is not confirmed to fit with the stock heat shield since it uses the same mounting points. You can use this shield with a turbo blanket for a layering effect.

      Trevor C. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: GS heat shield   wellnessbypaul495143 years ago

    Just bought this and waiting for it to arrive today. Im interested in buying a Process west TMIC, will this heat shield fit with the PW TMIC? Thank you in advance for the help.
    • 0 of 0 people found the following answer helpful

      A:  Both will work just fine together. In fact, there is a photo on the product page depicting this heat shield installed along with the Process West TMIC.

      guest56ad69792a8d256e198b66b5 @
        
      Was this answer helpful?
  • Q: GTX EWG Compatability  dzfoss061704 years ago

    Will this Heat-Shield allow the EWG option of the ATP GTX30 series to fit? Obviously a EWG incorporated into the Up-Pipe will clear but what about one incorporated into the turbo??
    • 0 of 0 people found the following answer helpful

      A:  Unfortunately we have not done testing with these parts. Mike

      GrimmSpeed
        
      Was this answer helpful?
  • Q: Blouch TD06H-20GXT-R  Saabaru54 years ago

    I have heard others comment that this shield will clear larger turbos. Could you confirm if this would fit over a Blouch TD06H-20GXT-R?
    • 0 of 0 people found the following answer helpful

      A:  Yes it should fit all stock location turbos. Mike

      GrimmSpeed
        
      Was this answer helpful?
  • Q: How hot  Lucas Mullins5 years ago

    How hot will the top side get? I was thinking about painting red Caliper paint rated at 900 degrees.
    • 0 of 0 people found the following answer helpful

      A:  We haven't done any testing on surface temps but these do get fairly hot. For best results I would recommend something that's rated for higher heat to insure it holds up better. http://www.tcpglobal.com/SprayPaintDepot/ItemDetail.aspx?ItemNo=VHT+SP109&gclid=CPnqis2PkrwCFa47MgodZnwAeg Mike

      GrimmSpeed
        
      Was this answer helpful?
  • Q: bracket for grimmspeed turbo heat shield?  jsantos10825 years ago

    so the upper and lower OEM bracket are needed to install this? if i only get the upper bracket, the heat shield wont be able to stay on?
    • 0 of 0 people found the following answer helpful

      A:  This heat shield mounts to the factory upper and lower heat shield brackets. If you don't have the lower bracket, then the heat shield may rattle.

      Zach G. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
    • 2 of 2 people found the following answer helpful

      A:  The recommended install is to use both OEM brackets. We cannot recommend any other method. Mike

      GrimmSpeed
        
      Was this answer helpful?
  • Q: stock heatshield bracket  YOkev5 years ago

    i took off my stock heat shield bracket that sits on top of the downpipe, will this affect the installation of the grimmspeed turbo heat shield? or do i need to put that top bracket back on? thanks !
    • 0 of 0 people found the following answer helpful

      A:  That bracket is needed to secure the heatshield, so you would want to re-install it.

      Kirill C. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  That bracket is one of the two required for install. Mike

      GrimmSpeed
        
      Was this answer helpful?
  • Q: grimmspeed  ccmvector22470295 years ago

    will this product fit my 08 wrx sedan?
    • 1 of 1 people found the following answer helpful

      A:  Yeah this will fit perfect on your 08 WRX as long as you're running a stock location turbo. Mike

      GrimmSpeed
        
      Was this answer helpful?
  • Q: Clearance  Alasyone061026 years ago

    Will this heatshield fit over a PTP turbo blanket for a 2012 WRX? Also is there a benifit to running a heatshield vs a turbo blanket. Thanks
    • 1 of 1 people found the following answer helpful

      A:  We haven't done testing in conjunction with turbo blankets, however, it should fit over if it's on the factory turbo. Our heat shield paired up with a quality turbo blanket would be a great set up and should allow for maximum heat blockage. This means lower engine bay temps and a more effective intercooler and colder intake charge. Mike Mike

      GrimmSpeed
        
      Was this answer helpful?
  • Q: heat shield  midnightracer723234446 years ago

    will this fit with my invidia catless downpipe. 12 wrx sedan
    • 0 of 0 people found the following answer helpful

      A:  Yes this will work with that down pipe as long as the turbo is in it's factory location. Mike

      GrimmSpeed
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  This turbo heatshield will fit with the Invidia downpipes.

      Zach G. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: Heat shield  mxriderandrew92022526 years ago

    Can you run a heat shield and a turbo heat blanket?
    • 0 of 0 people found the following answer helpful

      A:  Typically not as the heat shields are designed to sit very close to the turbo to help reduce the radiant heat from escaping

      Kirill C. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: Require bottom heat shield/uppipe bracket?  shingc626180886 years ago

    In the 11'wrx, there are 2 parts of the heatshield. Does this heatshield require the bottom heatshield brackets? Or will it work with just the 2 downpipe bracket holes?
    • 0 of 0 people found the following answer helpful

      A:  To properly mount the heat shield and prevent movement we recommend using both factory heat shield brackets. There is one off of the down pipe and one that mounts off the up pipe. Mike

      GrimmSpeed
        
      Was this answer helpful?
  • Q: Grimm Speed turbo heat shield GRM 092002  mbs647 years ago

    Will this product fit a stock 2009 WRX ?
    • 0 of 0 people found the following answer helpful

      A:  Yes, this GrimmSpeed heat shield will fit on a stock WRX. You will have to remove parts of the stock heat shield, but it will bolt up with no issues.

      guest561671092a8d25a1658c55d3 @
        
      Was this answer helpful?
  • Q: Install  Blm07287 years ago

    comes with instruction???
    • 0 of 0 people found the following answer helpful

      A:  In the package it does not. Grimmspeed has gone green and only includes a small piece of paper with a link to the instructions on their website. Thanks.

      guest5633b7522a8d259b038ba50d @
        
      Was this answer helpful?
  • Q: Fit with aftermarket downpipe?  agalat14407917 years ago

    Will this heat shield fit with a cobb downpipe without cutting?
    • 0 of 0 people found the following answer helpful

      A:  Hello, You bet, this will be a perfect fit on the Cobb Downpipe and will require no cutting or modification of the heat shield. It is designed to be a 100% bolt on part. :)

      Rick C. @ RallySport Direct 7 years ago  
        
      Was this answer helpful?