SET YOUR CAR
FREE SHIPPING
On orders over $100
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

Kartboy 12MM Black Exhaust Hanger Long

MODEL # KARKB-011-12MMXL

$9.00


  • Q: Hanger length Greddy  Gatoracer3 years ago

    I'm installing the Greddy supreme SP exhaust on a '17 WRX. Can you confirm if 5 hangers are needed? Also is it recommended to go with longer hangers took clear the bumper?
  • Q: 2013 wrx Hatchback   mikhail214 years ago

    Are these hangers stock length? I have a CNT exhaust and the flex pipe hits the trans bushing bolt sometimes.
  • Q: how many hangers do I need  Malammadi4 years ago

    Hi, I have a greddy Evo3 catback that I haven't installed yet on Wrx sti sedan 2012, my question is how many of these do I need and do I need a long or a normal hanger, I also have an exhaust heat sheild installed on the garnish so not sure if I need to make more room for that? Thanks
    • 0 of 0 people found the following answer helpful

      A:  Your exhaust will have five hangers. The Greddy is designed to use stock length hangers but if you need more clearance you would want to select longer length.

      Nick S. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: 2014 subaru wrx sedan  daniel3234 years ago

    How many hanger would I need for a Invidia Titanium Tip Racing Cat Back Exhaust Single Exit Subaru WRX Sedan 2008-2014 / STI Sedan 2011-2014
    • 0 of 0 people found the following answer helpful

      A:  The Invidia Titanium Tip Racing Cat Back Exhaust Single Exit Subaru WRX Sedan 2008-2014 / STI Sedan 2011-2014 uses 3 exhaust hangers.

      Zach G. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  Do you need 3? or is 3 recommended.

      daniel323
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  The catback that you asked about uses 3 hangers. No aftermarket hangers are necessary because you can reuse the stock hangers.

      Zach G. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: 2014 WRX Sedan  draymond5 years ago

    How many hangers would I need for the Invidia N1 dual?
  • Q: Will just one work  XXROCKMANXNEOXX5 years ago

    My axleback has a little clearence near the front bumper but near where the downpipe and mid pipe meet is where its really close to this heatshield i think by the shifter. I think i heard a little rattle. Would i need to change all my hangers to the long one or can i mix match with standard and long hangers?
    • 0 of 0 people found the following answer helpful

      A:  You can mix and match if you would like, but i would recommend finding out the exact cause of the rattle before replacing anything.

      Kyle A. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: N1 Street on 08 WRX  blud5 years ago

    Bought a used N1 street and was told by seller that i would need to get the extended hangers to get proper height on it,these would be the extended ones?
  • Q: 2014 STI sedan   Jbrar5 years ago

    I am wanting to put a greddy evo 3 exhaust on my 2014 sti sedan . Would these long style hangers fit best or stock length?
    • 1 of 1 people found the following answer helpful

      A:  The Greddy is meant to use stock sized hangers, although some customers will choose to go with longer hangers to space the larger diameter exhaust tubing from the body and rear bumper of the car.

      Nick S. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: 2013 WRX Hatch With Invida Dual N1  Styrk3r5 years ago

    Are the long version hangers needed when installing the Invidia Dual N1 if my WRX hatch has the factory Bumper Garnishes installed?
    • 0 of 0 people found the following answer helpful

      A:  Our customers have used the standard length exhaust hangers when mounting the N1 on their 2011-2014 WRX hatchbacks. There are a few pictures posted on that specific product page. Thank you.

      Sterling W. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: 2012 WRX Cobb tbe  srfseeker5 years ago

    I am installing Cobb's turbo back exhaust on my 2012 WRX hatchback. Do I need the long exhaust hanger or will the standard size work?
  • Q: 2013 wrx sedan  tempemail55c5218acaae52212d8b45695 years ago

    How many will I need for my wrx sedan?
    • 0 of 0 people found the following answer helpful

      A:  The stock and most aftermarket exhausts use 5 hangers total. These hangers are the long version and will lower the exhaust approximately 1 inch when compared to stock mounting height.

      Zach G. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: Hanger  Jojo 646 years ago

    Why do you need to soak the hangers in soapy hot water before the install?why?
    • 0 of 0 people found the following answer helpful

      A:  It will just help with installing them making them a little more flexible and easier to install instead of fighting with it. as they are pretty stiff.

      Kyle A. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: how many  jdmcglynn94463926 years ago

    how many would i need to hang an invidia n1 from my 2012 wrx hatch
  • Q: curious  Stroker7 years ago

    is this the right hangers to use so that my invidia n1 will not touch my bumper?
    • 0 of 0 people found the following answer helpful

      A:  This hanger is about 1 longer then the standard hanger. So if your current system touches the bumper, this will provide an additional 1 of exhaust clearance.

      Kirill C. @ RallySport Direct 7 years ago  
        
      Was this answer helpful?