SET YOUR CAR
Buy Now, Pay Later! Starting at 0% APR
FREE SHIPPING
On orders over $100
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

Kartboy 12MM Black Exhaust Hanger

MODEL # KAR KB-011-12MM

$8.00


  • Q: 2009 STI hatch invidia Q300  himvictor2 years ago

    would you recommend these hangers or the xl kart boy hangers for an invidia q300 system on an 09 STI hatch?
    • 0 of 0 people found the following answer helpful

      A:  The standard hangers should work fine for your application. If you find the exhaust sits closer to the bumper than you like the extended hangers might be a better choice.

      Connor M. @ RallySport Direct 2 years ago  
        
      Was this answer helpful?
  • Q: 2015 STI with Invidia Q300  moe sabra3 years ago

    I have invidia Q300 and would like to slightly lift the outer tips on both sides as I feel that the exhaust is sitting a bit low. Will these fix this problem or I will I require other hanger? Also, how many hanger will I need? thanks
    • 0 of 0 people found the following answer helpful

      A:  These are OEM length hangers and will sit similar to stock, although they may be stiffer depending on how aged your stock hangers are. It would be better to loosen the exhaust and situate the exhaust tips where you want, then from back to front tighten each flange while a friend holds the tips where desired.

      Nick S. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: 2015 Subaru WRX STi # of rubber hangers  dc5_dy3 years ago

    how many rubber hangers does 2015 STi have? is this better than the other rubber hanger 60mm hole distance? someone posted that 60mm hangs too low. im just worried because i saw a video clip in Youtube and looks like he's using stock rubber hangers that is TOO CLOSE to the bumper.
    • 0 of 0 people found the following answer helpful

      A:  The 2015 STI uses 5 exhaust hangers total. This not any better or worse than the 60mm long hangers, and these are stock length. Most exhausts are designed to use the stock, or stock size hangers, and it the exhaust is adjusted properly, then it should not be too close to the bumper.

      Zach G. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: 2014+ Forester XT (SJ)  V3004 years ago

    How many exhaust hangers total for the 2014+ Forester XT (SJ)? Also are these the correct part number for the OEM replacements? Thanks.
    • 0 of 0 people found the following answer helpful

      A:  You have 5 total exhaust hangers on that car. Let us know if you have any other questions!

      Tommy M. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: Hangers with Nameless Axleback  hedengrenchristian748994 years ago

    I have a nameless axleback on my 2013 sti sedan. they sit about an inch from the bottom of the bumper. Will these bring them closer? thanks in advance
  • Q: 2012 WRX N1 Hatchback  SBoruff5 years ago

    How many hangars will I need with my 2012 WRX Hatchback running Invidia N1 exhaust?
  • Q: hangerss  pinksonz900495 years ago

    would i burn my bumper if i was using this instead of the stock hanger for the q300?
    • 0 of 0 people found the following answer helpful

      A:  This hanger length is the same as stock and the exhaust would be mounted in the same location, unless the stock hangers are stretched.

      Zach G. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: Quantity Required For Invidia Q300 on 2011 WRX?  Eric5 years ago

    How many of these would be required to install the Q300 exhaust on a 2011 WRX? Looking at the exhaust I believe 5 is the answer but I wanted to make sure. Also the description says direct replacement. I assume this means designed to fit factory but are better quality and will last longer. Thanks.
  • Q: Hangers with invidia N1  Travy11285 years ago

    im going to get the invidia n1 single exit catback and i read the reviews and it says to get the hangers or else it will melt the plastic.... how many of these would i need for the single exit???
  • Q: KB hangers w/ NP axle back?  MattDGM116 years ago

    Just wondering if anyone has used these with the nameless performance axle back. I know that I would require 4 hangers. Is there anything I should be worried about?
    • 0 of 0 people found the following answer helpful

      A:  We have had people using them with stock hangers with no issues. So these stock replacement Kartboy Units should have no problem at all working with that axleback.

      Kirill C. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: 2011 Sti + Q300 sedan  hater066 years ago

    hey i have these installed on my 2011 sti + q300 exhaust and the mufflers look too low... i dont think they were installed wrong but it definitely looks like theres a ton of space btwn the bumper and exhaust tips... is this supposed to be like this?
    • 0 of 0 people found the following answer helpful

      A:  There are ways to adjust an exhaust at the joint where the midpipe connects to the axle back, you can rotate the exhaust one way or another and typically be able to adjust gap between the bumper. These units are supposed to be the same length as the OEM exhaust hangers, they are just a bit stiffer than OEM.

      Nick S. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: Installing Q300 on 2012 WRX Sedan  morse94436 years ago

    How many standard length + long version do I need for this fitment to look correct? Thanks.