SET YOUR CAR
TALK TO A PARTS EXPERT
- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Product images
Product Media
Subaru OEM Donut Gasket
Subaru EJ Models (inc. 2004+ STI / 2002-2014 WRX)
Product Resources
Features & Product Details
This is the Subaru OEM Donut Gasket. This gasket sits between your downpipe and mid pipe. This is a genuine graphite Subaru OEM part which can be used to repair or replace a leaking, or worn out gasket.
Sold individually.
Specifications
Brand:
Subaru OEM
Gasket Layers:
1
Material:
Graphite
QTY:
1
Mfgr. Warranty:
No Warranty
Condition:
New Product
Return Policy:
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
Standard
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Customer Photos and Videos
No user media. You can upload a photo or video of your install by posting a review.
karl.anguiano43785
I upgraded my downpipe and catback and had what smelled like an exhaust leak coming from the middle of the car. I checked to see if the gasket was seated properly. It looked to be. I took the car to my mechanic, he inspected it, along with other points of the exhaust system and said everything looked good to him. I decided to give replacing the gasket a try. What did I have to lose? I ordered the gasket, replaced it, and now all is fine!
6 of 7 people found the following review helpful
Haohmaru
Bruh, just putting the box it came in on the passenger seat gave my 2014 WRX 5+ HP.
WReXy
Everything is tiptop with this item, very nice material! Does what it's made to do. Once installed, kick back relax. No leaks!
0 of 1 people found the following review helpful
jonnyfilmboy
After 40k miles, the old one was destroyed. I had to chisel it out with a hammer and a screwdriver which took about 40 minutes. I also purchased a new set of spring bolts. Even though they looked to be in good condition, as soon as I tried to loosen them, the nut snapped the end of the bolt right off. Spent the next hour drilling out the hole. RSD doesn't sell spring bolts, so I got a set of two from Pep Boys. After all that, this gasket went on nice and snug. I tapped it lightly into place with a hammer, making sure not to damage it. The Cobb catback sealed up nicely to it. It's also kind of cool looking in person. Looks like aramid or carbon fiber.
QUESTIONS & ANSWERS
-
Q: Fitment TripleBean810 10 months ago
I am going to be running a Cobb down pipe to Invidia q300 exhaust. I know this gasket is normally used with the Cobb DP but only with stock catback right? Can I use this with the Invidia catback or should I be using the 3" 2 bolt gaskets?
-
-
0 of 0 people found the following answer helpful
A: For a proper connection you will need this plus a downpipe adapter. That will be the only true way of doing it.
Tyler A. @ RallySport Direct 10 months agoWas this answer helpful?
-
0 of 0 people found the following answer helpful
-
Q: Gasket mduncan1112 years ago
-
-
0 of 0 people found the following answer helpful
A: Yes this donut gasket will work with the BRZ/ FRS/ Toyoto 86.
Ben L. @ RallySport Direct 2 years agoWas this answer helpful?
-
0 of 0 people found the following answer helpful
-
Q: SPT exhaust D triggerman2 years ago
-
-
1 of 2 people found the following answer helpful
A: This donut gasket as well as the turbo to down pipe gasket.
Chris W. @ RallySport Direct 2 years agoWas this answer helpful?
-
1 of 2 people found the following answer helpful
-
Q: Fitment question eyewiggles2 years ago
-
-
1 of 1 people found the following answer helpful
A: Yes you will need the OEM gasket.
Jared A. @ RallySport Direct 2 years agoWas this answer helpful?
-
1 of 1 people found the following answer helpful
-
Q: Fitment wrxy3 years ago
-
-
0 of 0 people found the following answer helpful
A: It is recommended to use this donut gasket with the stock downpipe and SPT catback.
Zach G. @ RallySport Direct 3 years agoWas this answer helpful?
-
0 of 0 people found the following answer helpful
This Part Fits
Saab 9-2X
2.5i
2006 Saab 9-2X 2.5i
Aero
2005 Saab 9-2X Aero
2006 Saab 9-2X Aero
Linear
2005 Saab 9-2X Linear
