GrimmSpeed Uppipe to Turbo Gasket - Subaru Turbo Models
Manufacturer Part # 024001
Grimmspeed's high quality, multi-layered gasket is a great alternative to the other expensive gaskets on the market. Built like an OEM gasket to provide a long-lasting, leak-free seal, even under extreme heat and pressure.
This gasket lies between the up pipe and the turbo and we highly recommend new lower and upper up pipe gaskets anytime you have to remove or install an up pipe due to maintenance or upgrades.
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
2009 subaru impreza wrx sti hatch
himvictor 2 years ago
can never go wrong with these gaskets! quality just like OEM but better! must get these if your replacing or installing a new up pipe!
GS gasket works great!
MoMarkusz 2 years ago
This gasket works great and has multiple layers. Stands up to heat really well and crushes well the turbo and up-pipe holds well on up-pipe studs.
thiker is better
mikewondo 2 years ago
whenever you change your turbo follow best practices and change your gaskets to anything turbo related. your welcome!
QUESTIONS & ANSWERS
Q: Tomei EL Header/Up-Pipe Fitment EJ255/257 sjearthquakes40871256 3 years agoAnswer
Curious as to whether this will be both a direct fit, and the proper diameter/sizing on the upper Up-pipe to Turbo connection, with a set of Tomei EL Headers. Are all the piping, collector and primary sizes the same as OEM? Reason I ask is because if Tomei happens to use different specs in these areas, than perhaps their gasket are unique to their headers application/kit, and the G.S. counterparts are simply OEM spec replacements?
A: Yes, this gasket will work for Tomei's up pipe.
Brady R. 3 years ago
Q: Double thick version of this? cmte_souza 4 years agoAnswer
I had this installed but unfortunately it was leaking, maybe because of bad installation. Anyway I had to disassemble it and the gasket looks good. I usually go with the double thick options from GS when available, but couldn't find one for this gasket. Does it make sense to use two gaskets? Should I use any sort of sealing product or just the gasket? Thanks
A: If this wasn't sealing it's likely because you have a warped flange. A lot of heat goes through this area and parts can start to disform. You may want to check the flanges on a flat surface. Also make sure the flange is free of debris that the bolts are torqued to OEM spec. Mike
GrimmSpeed 4 years ago
A: UPDATE: This was not leaking at all. The leak was on the right side header collector with a shattered OEM gasket. Since it stands maybe 7 or 8 inches from the top of the uppipe and I was looking from above the engine trying to understand where the noise was coming from, I misjudged the leak spot. Checked the flanges, reused the GS gaskets and replaced the collector ones with GS, everything is great now! Thanks!
cmte_souza 4 years ago
Q: Invidia uppipe smoodit 5 years agoAnswer
will this product pair up perfectly with the invidia catless up pipe? wrx model 2005 2.0L turbo