SET YOUR CAR
FREE SHIPPING
On orders over $100
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts
Product images
Product Media
PERRIN Performance Front and Rear Endlink Kit (Part Number: )
PERRIN Performance Front and Rear Endlink Kit (Part Number: )
PERRIN Performance Front and Rear Endlink Kit (Part Number: )
PERRIN Performance Front and Rear Endlink Kit (Part Number: )
PERRIN Performance Front and Rear Endlink Kit (Part Number: )
PERRIN Performance Front and Rear Endlink Kit (Part Number: )
PERRIN Performance Front and Rear Endlink Kit (Part Number: )
PERRIN Performance Front and Rear Endlink Kit (Part Number: )
PERRIN Performance Front and Rear Endlink Kit (Part Number: )
PERRIN Performance Front and Rear Endlink Kit (Part Number: )
PERRIN Performance Front and Rear Endlink Kit (Part Number: )
PERRIN Performance Front and Rear Endlink Kit
Subaru WRX 2002-2007
Write a Review | 4 Q&As
Part # 1 PSP-SUS-113-213
$0.00
msrp: $0.00

Ships within 8 days

Features & Product Details

PERRIN Performance has designed and created the Front and Rear Endlinks to improve both the handling and performance of your vehicle. For those of you who enjoy spirited driving or the occasional track weekend, you will notice improved cornering, and reduced body roll.

The factory end links are weak, and will flex under hard cornering. And the flex will increase if you install a stronger sway bar. The PERRIN units remove the flex out of the equation. These are fabricated from 6061 T6 aluminum, and provides a solid connection between your sway bar, and chassis. These are also longer when compared to the OEM units. The extra length has been designed to maintain a good position for those with lowered vehicles.

Other features include 95 durometer polyurethane bushings which are super strong, and the end links themselves have been powder-coated black to be weather resistant. Hardware will be included to make these end links ready for installation​

Specifications

Brand: PERRIN
Adjustable: No
Bearing Type: Polyurethane Bushing
Material: Aluminum
QTY: 4
Mfgr. Warranty: 5 Years
Condition: New Product
Return Policy:

RallySport Guarantee - 30 Days


Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.

RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.

The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
RallySport Guarantee
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED

REVIEWS & CUSTOMER MEDIA

Be the first to write a review

QUESTIONS & ANSWERS

  • Q: Fitment  Steven8 months ago

    Installed both front an rear on my 02 2.5rs directions abit unclear. will they only be tightened on flat ground and not on jacks?I torqued on jacks then lowered to ground after checking alignment being hand tight did not need to lower to install bolts but With 2 extra washers in top (sway bar side) it doesnt exactly seem completely perpendicular or it won't?
    • 1 of 1 people found the following answer helpful

      A:  Yes, you need to torque these on the ground. The car needs to have load on it when you tighten them down so that everything will install properly.

      Devan M. @ RallySport Direct 8 months ago  
        
      Was this answer helpful?
  • Q: Fitment  Steven8 months ago

    Installed both front an rear on my 02 2.5rs directions abit unclear. will they only be tightened on flat ground and not on jacks?I torqued on jacks then lowered to ground after checking alignment being hand tight did not need to lower to install bolts but With 2 extra washers in top (sway bar side) it doesnt exactly seem completely perpendicular or it won't?
    • 1 of 1 people found the following answer helpful

      A:  Yes, you need to torque these on the ground. The car needs to have load on it when you tighten them down so that everything will install properly.

      Devan M. @ RallySport Direct 8 months ago  
        
      Was this answer helpful?
  • Q: Endlinks  Jtorio812 years ago

    Will this fit on a 06 foresters xt since it shares the same frame as the 02-07 wrx and will it fit with 24mm front /22mm rear sway bars
  • Q: Perrin Endlinks  GS2 years ago

    Is this kit compatible with a 2002 WRX Wagon? Thanks
    • 0 of 0 people found the following answer helpful

      A:  Yes, Perrin engineers their parts to work with both sedan and wagons for the GD chassis.

      Tyler A. @ RallySport Direct 2 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  By looking at the front links that have the same ID for both ends, I'd say they're not. Thank you none the less.

      GS @
        
      Was this answer helpful?