SET YOUR CAR
FREE SHIPPING
On orders over $100
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

Kartboy Front and Rear Endlink Combo

MODEL # KARKB-017-STI-COMBO

$200.00


  • Q: 2007 legacy specB  07specB1 year ago

    Pairing these endlinks with aftermarket white line sway bars. Are spacers required on both front and back?
  • Q: Legacy GT 2006  Randy2 years ago

    Hi RallySport, I would like to check if this products fits a 2006 Legacy GT Wagon (BP5)? Please advise. Thank you.
  • Q: Clunking noise   Joey3 years ago

    I have a clunking noise in the rear and want to just replace all four end links with this kit will I need anything else to help the install and stop the clunking
    • 0 of 0 people found the following answer helpful

      A:  If you have aftermarket sway bars, it would be wise to also purchase the front endlink spacers from Kartboy. Otherwise, nothing else will be needed.

      Josh P. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Swift Springs  HaVikSpecB4205 years ago

    Would these require spacers with Avo sway bars if i have swift lowering springs??
    • 0 of 0 people found the following answer helpful

      A:  we won't be able to confirm fitment for the avo sway bars as it isn't a product we carry. You will want to install them and then see if they do or don't need them.

      Kyle A. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: Lowered Forester do I need spacers?  Whokid9786 years ago

    Would I need spacers if I'm installing these on a Lowered 04 forester xt
    • 0 of 0 people found the following answer helpful

      A:  If your car is lower then stock then front spacers would be required

      Kirill C. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  what spacers did you end up getting? I also have a lowered 04 fxt but im not seeing any that fit my car

      Ian @
        
      Was this answer helpful?
  • Q: Fitment with Perrin 22mm Sway Bars  Jonkoh6 years ago

    Any problems using these with Perrin 22mm front & rear sway mounts? Is spacer required? a) 22mm Front Sway Bar (PSP-SUS-100) b) 22mm rear Sway bars with stout mounts (PSP-SUS-205) Vehicle: 2007 Forester XT
    • 0 of 0 people found the following answer helpful

      A:  Would be no problem at all. If your car is lowered you will want to get the front Kartboy spacers, but that would be about it.

      Kirill C. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: Hardware  breezecobra26 years ago

    Does this come with all necessary hardware (bolts and nuts) to install it with the Eibach sway bars?
    • 0 of 0 people found the following answer helpful

      A:  These do come with the same hardware and washers that the separate items are included with, ready to install and they should not have any problems with your Eibach Swaybars.

      Nick S. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: Spacers  albotsti6 years ago

    Are spacers needed when using these end links with stock sway bar? Thanks
    • 0 of 0 people found the following answer helpful

      A:  When using with stock bar, spacers are usually not needed as long as your vehicle is at stock ride height, but there is no way to tell for sure until the endlinks are installed.

      Kirill C. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: Fitment with eibach 25mm sway bars.  Chandler B.7 years ago

    Do these fit with the eibach 25mm front and rear sway bar combo kit?
  • Q: Extra spacers needed?  QuickSilverSTI7 years ago

    I am looking to get the front and rear kartboy end links to go along with whiteline front and rear 24mm sway bars (WHI BSR37XZ and WHI BSF36XZ. Just wondering if I will need extra spacers to go along with this setup.