SET YOUR CAR
TALK TO A PARTS EXPERT
- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Product images
Product Media
Community Media
CSF Racing Radiator
Subaru WRX 2008-2014 / STI 2008+
Features & Product Details
RallySport Direct proudly carries a great selection of quality racing radiators brought to you by CSF.
Here, you are looking at the CSF Racing Radiator. This is a super-durable all aluminum radiator designed to replace your factory radiator to improve the overall cooling efficiency. Most factory radiators are manufactured using plastic upper and bottom tanks which will eventually weaken over time, and will leak which will cause you to overheat, which will open up an entirely different set of problems. CSF relieves this issue with all-aluminum construction to essentially become the end-all-be-all of radiators.
DETAILS:
Product Video
Specifications
Brand:
CSF
Core Depth:
1.88 in
Core End Tank Material:
Aluminum
Core Height:
13.50 in
Core Width:
27.25 in
Includes Radiator Cap:
Yes
Mfgr. Warranty:
Limited Lifetime
Condition:
New Product
Return Policy:
Standard
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Customer Photos and Videos
5out of
5stars
Ejay_25
Pulled the trigger with a generous discount code, love the quality of the radiator and larger core. Super easy to install and oem fans bolt right up. It falls right into place even though it looks wider than oem radiator but don’t be scared. I will add that IF YOU ARE RUNNING a front oil cooler like the mishimoto one that I am using the braided oil lines will prevent the radiator from falling into place. Not too worry all you need to do is cut a small piece of plastic from the fan not the actual blades. About a inch at most and it will give you enough room to set the radiator down into position. Other than that I paired this product with redline water wetter and silicon hoses. Looks amazing!
4out of
5stars
RogueTurtle
Radiator works great but the cap they gave me looks a little bent and it leaks coolant a lot.
5out of
5stars
tyleramacher51664
Great product. OEM fitment of all the lines, hoses, fans everything fit perfect. Plus all the brackets and pieces are aluminum vs oem plastic. This radiator is beautiful, it’s like installing a piece of shiny art. Came packaged very nicely with zero damage. Came with decals & stickers too. Been running this radiator for a couple months now with zero issues. CSF is worth every penny.
5out of
5stars
thatoneimpreza
Bought this for my 2012 WRX to replace my OEM radiator that finally gave out. The radiator is high quality and very well made. The way the radiator was packaged was exceptional and definitely made to protect it during shipping. Fitment is spot on. I had no clearance issues with the fan connectors, fans, or overflow tank. You do have to cut about 1/2" from all the hoses that connect to the radiator so you don't have any kinked or rubbing hoses since this radiator is much bigger than stock but that's hardly an inconvenience. Definitely worth the upgrade!
5out of
5stars
midnightwrench
I installed this radiator along with a set of mishimoto radiator hoses and perrin radiator stays. the install was easy but note that trimming of the new hoses and existing breather hoses is needed since the CSF radiator is almost twice as thick. also the passenger side fan connector just barely clears the timing cover. i will cut down the fan shroud to help it clear better. finally i put a piece of thick foam weatherstripping between the crossmember an the top of the radiator help airflow. i am happy with radiator all things considered.
QUESTIONS & ANSWERS
-
Q: fitment NRN4 months ago
will this fit a 2020 Subaru wrx sti manual, if so do I have to buy new radiator hold for the top or will the stock ones fit?
-
-
0 of
0 people found the
following answer helpful
A: Yes, the 2008+ STI's will use the same radiator, and this will work with your stock radiator stays.
Lane H. @ RallySport Direct 2 months agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Fits on WRX STi 2016 EJ257 Vojta Smok2 years ago
-
-
0 of
0 people found the
following answer helpful
A: We can only confirm fitment on USDM models.
Luis L. @ RallySport Direct 2 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: OEM fans/shroud evancatu909622 years ago
-
-
1 of
1 people found the
following answer helpful
A: We would not be able to confirm fitment of different types of fans with this setup.
Devan M. @ RallySport Direct 2 years agoWas this answer helpful? -
0 of
0 people found the
following answer helpful
A: I am running the stock OEM fans/shroud. what i ended up doing was un-clipping the mount that holds for the passenger fan connector on the shroud. this resolved the slight touching of the connector with the engine timing belt cover. i moved the connector slightly down and zip tied it lower down the shroud.
midnightwrench @Was this answer helpful? -
0 of
0 people found the
following answer helpful
A: Yes 2008 WRX oem fans fit perfect. Zero clearance issues.
tyleramacher51664Was this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: Radiator Shroud fitment Rich3 years ago
-
-
0 of
0 people found the
following answer helpful
A: We can not confirm this to work with any specific shroud.
Luis L. @ RallySport Direct 3 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Radiator Akram28855 years ago
-
-
0 of
0 people found the
following answer helpful
A: This is not confirmed for an automatic and has not been test fitted.
Nick S. @ RallySport Direct 5 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
