


GrimmSpeed Cold Air Intake Black
Subaru WRX/STI 2008-2014 / Forester XT 2009-2013
Features & Product Details
RallySport Direct proudly carries a great selection of quality aftermarket performance products brought to you by GrimmSpeed.
Here, you are looking at the GrimmSpeed Cold Air Intake. This intake is the result of countless hours, engineering, and testing to develop a cohesive cold air intake kit designed to allow the engine to breathe with minimal restrictions. With a proper tune, this cold air intake system will increase the horsepower, torque, as well as the throttle response in your vehicle.
FEATURES:
Product Video
Specifications
Carb Restricted Shipping
If an Item is CARB exempt it means that it has undergone an engineering evaluation by CARB (California Air Recourses Board) and is shown to not increase vehicle emissions. If an item is CARB Exempt it will have an EO (Executive Order) number associated with it. Even if an item has an EO number it is not guaranteed to be CARB exempt for your vehicle. It is important to confirm that your Year Make and Model fall under the CARB EO number associated with the part. That can be confirmed either by checking the CARB website or the manufacturers website.
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA


This intake is bad, literally waited 4 months to get in. Even though it's closed the seals are cheap and lets water get sucked in causing my car to run like trash.
The product is great. I was a small bit skeptical buying because I wasn't sure if my intake temps would improve because no reviews covered in depth. But I will say that after installing my intake temps went down to a constant 8° - 11° above ambient which is extremely good. My fenderwell fell off at one point and my intake temps went up to 20° above ambient so my advice would be to keep your fenderwell on lol. The sound is pretty cool and louder than stock but that wasn't the reason I bought it. I am more than satisfied with the intake temps and durability of it. Definitely a product i would buy again.
I love this intake. Grimmspeed says they took the best of SM and CAI and put it to good use. It looks perfect, super functional, plus you get that lovey turbo spook and blow off sound, without spending money on a nice blow off valve. This thing seals out the engine heat from the filter and my MAF sensor showed me a 20 degree drop in the incoming air charge off the bat. I live in a warmer climate, so this is definitely Worth it to me!
After the easy 30-40 minute install of this on my 2014 WRX hatchback, I can hear my turbo spool pretty loudly. It sounds great and combined with my Cobb exhaust, both sounds are intoxicating and make me smile every time I go near the throttle. Slight power gain but the most noticeable difference is the noise.
I got this for my 2010 WRX sedan. Install was very easy and straight forward. It has a clean look and if you get the right tune, you can definitely feel the power improvement.
QUESTIONS & ANSWERS
-
Q: Cleaning solution Studebaker836 years ago
In looking at images it appears the filter is the same design as the K&N and was wondering if their cleaning solution would work. If not what would you use to clean it?
-
-
0 of
0 people found the
following answer helpful
A: Grimmspeed doesn't have a specific cleaner for this intake, but any cleaner that works with a cotton style filter like this will work well with it.
Chris W. @ RallySport Direct 6 years ago
-
0 of
0 people found the
following answer helpful
-
Q: Intake air temps juanh37 years ago
Does this intake make your intake temp increase a lot compared to the stock one. I've read and heard that the cobb intake does. Was just wondering if this one did also.
-
-
0 of
0 people found the
following answer helpful
A: IATs will be comparable, if not a little cooler than the stock intake.
Josh P. @ RallySport Direct 7 years ago
-
0 of
0 people found the
following answer helpful
-
Q: Australian WRX mikeyy8 years ago
hello im wondering if this will fit a Australian 2013 wrx?
-
-
0 of
0 people found the
following answer helpful
A: I do not see a reason that this would not fit, however we only guarantee fitment on U.S. Spec cars.
guest566b4fa62a8d25ff038cadad @
-
0 of
0 people found the
following answer helpful
-
Q: Can this intake kit couple with Perrin turbo inlet hose for WRX 08? Kraven8 years ago
Hi as per title
-
-
0 of
0 people found the
following answer helpful
A: This is designed with OEM fitment in mind, any OEM fit turbo inlet hose will work great with this intake.
Nick S. @ RallySport Direct 8 years ago
-
0 of
0 people found the
following answer helpful