SET YOUR CAR
TALK TO A PARTS EXPERT
- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Product images
Product Media
Community Media
Cusco Power Brace Front Member
Subaru Models (inc. 2002-2007 WRX/STi)
Features & Product Details
RallySport Direct proudly carries some of the best suspension and drivetrain modifications brought to you by the industry leaders at Cusco.
On this page, you are viewing the Cusco Power Brace Front Member which has been designed to stiffen up your chassis and help reduce vehicle body flex. This is especially beneficial for those of you who participate in high-performance driving conditions where the driver needs better feedback for high-speed cornering.
DETAILS:
NOTE:
Specifications
Brand:
Cusco
Adjustable:
No
Color:
Blue
Installation Hardware Included:
No
Location:
Front Bumper Beam
Material:
Aluminum
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Customer Photos and Videos
2 of 2 people found the following review helpful
5out of
5stars
Ian L.
First off the part looks great in person once opened from the box, it matches all the other Cusco blue braces. I installed this on a 2006 STI, so to install this bad boy, you gotta take off the from bumper skin/plastic bumper to actually access where this goes. Many of said you need to do some trimming of the plastic bumper once you have this part installed for it to fit back on right, that is incorrect for a 2006/2007 STI, YOU DO NOT NEED TO TRIM ANYTHING ! The bottom/center bolt on the brace connects to the car, replaces a plastic push clip that goes along with all the others to keep the plastic bumper skin on, you will know what i'm talking about if you have taken off your front bumper skin, it is dead nuts center on the inside of the skin. Once the brace has been installed and all torqued down well, you just put back on the front bumper skin, it's that simple for the install. One thing I did since the center hole on the front bumper skin would not be used with that push clip anymore, I just made sure that hole hooked onto the threads from the center bolt from the front power brace, they stick out a bit, enough for you to hook that hole over it and it will stay very firmly in place. Put back all your other push clips and snap the bumper back on all good, and you are done ! The part is visible from the front once the bumper is back on and in place, it is not a hey look at me kind of view, but you see it a bit. Ok so far as performance, well, I have all the other Cusco braces as well, so I wanted to get this in conjunction, after driving the car around a bit, I did notice that the front end seemed a bit stiffer/solid if that makes sense. I am still on stock set up as far as springs and all that, but I do have strut tower braces and all the Cusco lower power braces and Cusco front/rear sway bars. I felt the difference more driving on the freeway, than the street due to more turns and all that. Would I recommend buying this ? Yes, if you have other braces and sway bars like I do, then it's a definite Yes, I did notice a difference, not huge, but in my opinion every little bit helps, also I don't think a FMIC would fit with this part, so if you plan on going that route in the future, I would save your money and spend it on something else just my 2 cents. And as always RSD has the parts I want/need for my 2006 STI in stock and at great prices.
1 of 1 people found the following review helpful
5out of
5stars
Anil
The cusco brace is a great item, fits perfect with small modifications on bumper. Recommed to all gd owners
5out of
5stars
Anil
The cusco brace is a great item, fits perfect with small modifications on bumper. Recommed to all gd owners
5out of
5stars
kuabara18260225
Nothing more to say. Simple bolt-on affair after removing bumper. Didn't have to do any cutting of the bumper on my '06 STi. Looks great and adds some aggressiveness to the front end!
2 of 2 people found the following review helpful
5out of
5stars
Brian P
Installed on 02 wrx. Bar works with 02 usdm & jdm bumper beam. For me it's more of a cosmetic mod because it does absolutely nothing, but you know you still want it. Install of the actual bar was a breeze with just 3 bolts, trimming takes up most of the install time.
QUESTIONS & ANSWERS
-
Q: jimmm jimmy9 months ago
does this fit with with Perrin FMIC??
-
-
0 of
0 people found the
following answer helpful
A: I've never run that combo personally, but honestly I doubt it would. Thanks!
Rick C. @ RallySport Direct 9 months agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Wagon fitment dustywgn1 year ago
-
-
0 of
0 people found the
following answer helpful
A: This should fit a 2002 WRX wagon
CodyWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Fitment THuynh262 years ago
-
-
0 of
0 people found the
following answer helpful
A: No this won't fit with a FMIC. The brace will interfere with the intercooler core.
[email protected]Was this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Fitment Question Sergiod4 years ago
-
-
0 of
0 people found the
following answer helpful
A: We are not able to confirm fitment because we have not test fitted the two together.
Jared A. @ RallySport Direct 4 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Does this work with OEM US front bumper beam? CHENG0085 years ago
-
-
0 of
0 people found the
following answer helpful
A: Some trimming may be required. If anyone has had this fit without trimming, they could be on a JDM bumper. The US bumpers have different regulations and will more than likely require modification for this brace to fit.
Chris W. @ RallySport Direct 5 years agoWas this answer helpful? -
0 of
0 people found the
following answer helpful
A: Hi Chris, Thanks for that answer. Understood that the bumper piece will need trimming (aka the plastic parts). Just wanted to make sure that my safety is not compromised by having to remove the US safety beam (metal thing bolting to frame of car)? Hope that makes more sense...
CHENG008Was this answer helpful?
-
0 of
0 people found the
following answer helpful
