SET YOUR CAR
TALK TO A PARTS EXPERT
- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Product images
Product Media
Community Media
Invidia N1 Cat Back Exhaust Titanium Tips
Subaru WRX/STI 2015+
Features & Product Details
RallySport Direct is proud to carry the Invidia N1 Cat-Back Exhaust System. The N1 is among one of the most popular cat-back exhaust systems available as they make for an excellent upgrade over the OEM exhaust system to improve the performance and the sound. The combination of increased piping diameter along with smooth bends relieves the exhaust with restriction and turbulence under acceleration which will increase the horsepower, the torque, all while improving the throttle response and reducing the turbo lag.
Here are the key features:
Note-
Kartboy standard exhaust hangers will not work with this exhaust.
Product Video
Specifications
Brand:
Invidia
Exhaust Orientation:
Angled Exit
Installation Hardware Included:
Yes
Piping Coating:
No
Piping Flex Joint:
Yes
Piping ID:
3.00in
Piping Material:
304 Stainless Steel
Piping Taper:
No
Silencer Included:
Yes
Tip Material:
Titanium
Tip Qty:
2
Tip Shape:
Round
Tip Size:
101mm
Mfgr. Warranty:
1 Year
Condition:
New Product
Return Policy:
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
Standard
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Customer Photos and Videos
5out of
5stars
Polar
First, you NEED the grimmspeed 2” to 3” adapter. I bought mine off eBay since it was sold out everywhere. This cat back really brought my WRX to life. It’s not obnoxiously loud, however it does make it louder and provides a tasty rumble. Occasionally I’ll get a few pops too. I had a friend help me install it, 2 people is almost a must. Took us 2 hours to do, with little experience. Get yourself some WD40 for the hangers or they’re a pain to take off. Overall, I'm very happy with this cat back. It looks sweet and sounds great!
5out of
5stars
SnoddyWrx88
I would to start by saying wow the shipping and customer service 10/10 ordered it and it arrived 4 days later to Canada! I have an invidia Catless downpipe mishimoto intake and now this N1 to go full turbo back , I had the remark axleback and wow its 11/10 for noise , with this N1 its so deep instead of obnoxious I like it and so do my neighbors! I recommend for sure .
5out of
5stars
Bo
if you want an exhaust that doesn't break the bank but sounds like you did, then look no further. I deliberated for almost 3 months on which exhaust i wanted to buy and i couldn't be happier with the Invidia N1. the welds are incredible and clean and when you open the box and handle the parts, you can really see and feel the quality. why this is exhaust is less than $1,000, i have no idea. i'm a huge fan of Cobb, milltek, and HKS for thier exhausts and the Invidia N1 is just as high quality. it really boils down to cost and sound preference. Speaking of sound, there is not a tiny Civic rattle, just straight boxer thunder. my only concern was how the round tips look with the almost rectangular openings in the diffuser but it turned out fine (just fine, im going to get a new diffuser soon still) and it has good clearance so there's no real need for a heat shield. the anodized tips catch the sunlight exquisitely and adds an amazing accent to the tail end. my final thoughts, if you want a high quality, low price exhaust that farts out equal parts power and freedom, then look no further 11/10.
5out of
5stars
FL4tTire
I was kind of scared to purchase this because I had heard it was really loud. After getting it installed I was hooked. The sound it amazing and it doesn't even seem that loud. I used to drive a 94 240sx w/ RB20DET, straight piped with no muffler and that thing was LOUD!! It has some noise as expected from an aftermarket exhaust but it's not obnoxious. Clean sound from the rumble and when you get on the gas it purrs. Just make sure if you have a MT that you tighten the plugs for the extra O2 sensors. I forgot and had a crazy rattle going on. Tightened it up and BAM, no rattle.
1 of 1 people found the following review helpful
5out of
5stars
Stryker165
I waited two weeks to review the N1 exhaust for my 2016 wrx sti.. At first it was in your face loud. Overbearing and way too loud for a daily driver. This is coming from a 2003 mustang gt with full exhaust headers and intake. 2 weeks later it settled in and is amazing. It is more responsive and a great rumble. Forgot your neighbors, it will calm down after idle. Then it is satisfaction until redline. Cannot wait until downpipe and tune. Thank you RSD!! Get The Grimspeed stock dp to catback adapter. Made world of difference in installation and torque solutions for hangers. Perfect! Ok now silencer issues. Forget the silencer. It is way too quiet. If you want to use it, skip the N1. If you want it, freaking tighten the holy hell out of the little nut and bolt they use. Lost mine in 2 miles and kept it off.
QUESTIONS & ANSWERS
-
Q: Invidia N1 (axel back) Walt1 month ago
I have a simple question. I have an Invidia R400 (dual exit) in my 2019 STI but I’m becoming interested in the Invidia N1 dual exit. Is it possible to purchase just the N1 axel-backs since I already have a cat-back of the same brand? Thanks!
-
-
0 of 0 people found the following answer helpful
A: Unfortunately, Invidia does not sell the axle-back portion separately.
Jesse F. @ RallySport Direct 25 days agoWas this answer helpful?
-
0 of 0 people found the following answer helpful
-
Q: Downpipe fitment Brian1 month ago
-
-
0 of 0 people found the following answer helpful
A: The COBB catted downpipe tapers to a 2.5" exit and uses the factory style donut gasket. So you would just need an adapter to bolt this catback to the COBB downpipe. Part # GRM07704
Jesse F. @ RallySport Direct 23 days agoWas this answer helpful? -
0 of 0 people found the following answer helpful
A: Just got invidia N1 exhaust and the exhaust fits perfectly fine to the Cobb catted downpipe, no adapter needed. I have a 2019 STI so I don’t know if they fixed the fitting. All I know is that it fits.
Brian @Was this answer helpful?
-
0 of 0 people found the following answer helpful
-
Q: Tune up johann3 months ago
-
-
0 of 0 people found the following answer helpful
A: You will not need a tune to install a catback exhaust system.
Jesse F. @ RallySport Direct 25 days agoWas this answer helpful?
-
0 of 0 people found the following answer helpful
-
Q: 2019 Wrx install Erik5 months ago
-
-
0 of 0 people found the following answer helpful
A: You'll want part number GRM077046 in order to install it with your stock downpipe since this cat back is 3"
Travis D. @ RallySport DirectWas this answer helpful?
-
0 of 0 people found the following answer helpful
-
Q: 2019 wrx Erik5 months ago
-
-
0 of 0 people found the following answer helpful
A: You'll want part number GRM077046 in order to install it with your stock downpipe since this cat back is 3"
Travis D. @ RallySport DirectWas this answer helpful?
-
0 of 0 people found the following answer helpful
