Invidia N1 Cat Back Exhaust Single Titanium Tip - Subaru WRX Sedan 2008-2014 / STI Sedan 2011-2014
Manufacturer Part # HS08SW4GTT
Bundle Savings:MSRP: $882.00
If you are looking for a great way to squeeze a little extra performance from your vehicle, then you will be pleased with the Invidia N1 Cat Back Exhaust System. There are several performance attributes that makes this an excellent upgrade. This exhaust system has been made from 304 stainless steel and features 76MM piping. The exhaust has also been designed with minimal bends to reduce the amount of turbulence during acceleration, allowing the engine to exhale the exhaust gasses with less restrictions. This means you will have improvements in throttle response, along with increases in both horsepower and torque.
This exhaust will come with a beautiful 101MM titanium tip, and the exhaust hangers are welded onto the stock location of the pipes so you don't have to perform further modifications.New gaskets, hardware, as well as an exhaust silencer will be included to make this exhaust system ready for installation.
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
2 years ago
This exhaust sounds so good on my car I bought without catless dp but will be getting one soon! But still sound great without dp! It also bolted up perfectly I have slight rubbing on the frame at high idle but I just need to adjust hangers
pwndotcom 4 years ago
when i purchased this exhaust, i was worried it would be super loud, especially since i live in the SF bay area (cops here rule with an iron fist). after install, i must say... IT'S LOUD, but in a good way. note, this exhaust isn't for everyone, but if you like loud cars, with a deep rumbling noise, this is for you. after driving around in it for 2 months, i am even thinking of getting the RACE version pipe to get ride of the resonator. you definitely get used to the noise + my neighbors haven't complained.
WRX_GUY0528 4 years ago
I absolutely love this exhaust. I have it paired with the Invidia catless downpipe and it sounds amazing. Tuned on Cobb Stage 2 map, it has a great, deep tone, and best of all there is no rasp. Great throttle response and quickness to it. I fell in love with my car all over again. Great Product and great customer service and fast shipping from RSD!
olsmakz 5 years ago
The exhaust fits great on my car. It sat close to my sway bar and rattled, so I had to order longer hangers. But no problem with it, defiantly worth it to buy. It sounds amazing
FrankF 5 years ago
Great sound with My AMR EL header and Catless downpipe. No drone with my set up. If the sound is too loud I put the silencer in and it does significantly lower the sound to almost stock levels. I can imagine this exhaust being a little annoying(drone) with the UEL header design.
QUESTIONS & ANSWERS
Q: Midpipe and adaptability Misterturbo 1 year agoAnswer
Does this system use the same mid-pipe where I could swap the back portion of the Q300 for this single exit?
A: Yes they use the same mid-pipe.
Tyler A. 1 year ago
Q: exhaust rbrenner8618073 2 years agoAnswer
is the axle back portion of this kit aka the muffler the same as the race version?
A: I believe the muffler section is the same. The Midpipe is different.
Josh P. 2 years ago
Q: End muffler jjromeSTI 2 years agoAnswer
Hello , Is it possible to only get the endmuffler with the pipe? I already got a self made Catback exhaust with a straight pipe and an endmuffler from another make. But i am not so happy with it so I would like to get the invidia but only the endmuffler
A: Invidia does not sell the axleback separately.
Nick S. 2 years ago
Q: current exhaust compatibility/ bumper compatibility jake 3 years agoAnswer
I have a '14 impreza wrx sedan with the stock upgrade SPT exhaust setup currently, could i use the SPT downpipe ( if the SPT system comes with one, idk if it does haha) without having to change anything and would this exhaust fit with the stock bumper?
A: The SPT system is just a catback, so no need to worry about the downpipe! While a downpipe adapter is not required, it is highly recommended. Running a downpipe adapter in addition to an OEM Donut Gasket will prevent major exhaust leaks from occurring. This exhaust should fit just fine with your stock bumper.
Josh P. 3 years ago