- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
-
Q: Fitment cstamay123 years ago
Will this be able to be installed on a 2012 Impreza 2.0i Sedan?
-
-
0 of
0 people found the
following answer helpful
A: This will not fit without modification, it is designed for the turbocharged models.
Lane H. @ RallySport Direct 2 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: 2008 Subaru wrx Invidia Race cat-back exhaust fitment Vince3 years ago
-
-
0 of
0 people found the
following answer helpful
A: As long as you have a Sedan, this will be the right one. And if you're running the stock downpipe an adapter will be required and I will link to it below. If you are running an aftermarket downpipe, no adapter will be required. https://www.rallysportdirect.com/part/exhaust-gaskets-and-hardware/grm-077046-grimmspeed-oem-downpipe-to-3in-cat-back-adapter
Rick C. @ RallySport Direct 3 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: fitment STIDaily3 years ago
-
-
0 of
0 people found the
following answer helpful
A: This is only confirmed to fit 2011+ STIs it looks like, and only sedans. As with the downpipe, it should fit most 3-inch DPs with the 2 hole setup, but we don't confirm fitment between differently branded parts.
CodyWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Will it fit? Andy4 years ago
-
-
0 of
0 people found the
following answer helpful
A: This should bolt up with no issues.
Michael N.Was this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Invidi exhaust fitment Eric4 years ago
-
-
0 of
0 people found the
following answer helpful
A: This will not work. In order to fit you will need to have this exhaust modified in order to fit.
Michael N.Was this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Melting CV Boot Omar4 years ago
-
-
1 of
1 people found the
following answer helpful
A: We have not heard of an issue, but I would recommend extended hangers for better clearance.
Michael N.Was this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: 2011 wrx shawn4 years ago
-
-
0 of
0 people found the
following answer helpful
A: This is a catback, so no, you cannot bolt a catback to a catback.
Devan M. @ RallySport Direct 4 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Exhaust invidia Nicola5 years ago
-
-
1 of
1 people found the
following answer helpful
A: Chat in with us! We would love to help
Devan M. @ RallySport Direct 5 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: Resonator thatslow_subaru5 years ago
-
-
1 of
1 people found the
following answer helpful
A: This does not have a resonator.
Luis L. @ RallySport Direct 5 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: Cobb DP Question aaronismrbig5 years ago
-
-
0 of
1 people found the
following answer helpful
A: Nope! This would bolt right up!
Brady R @ RallySport Direct 5 years agoWas this answer helpful?
-
0 of
1 people found the
following answer helpful
-
Q: Donut gasket KingofTantalisHI6 years ago
-
-
0 of
1 people found the
following answer helpful
A: If you have a 3 inch downpipe you will NOT need the donut gasket.
Tyler A. @ RallySport Direct 6 years agoWas this answer helpful?
-
0 of
1 people found the
following answer helpful
-
Q: fit on my downpipe Delta7 years ago
-
-
0 of
0 people found the
following answer helpful
A: Due to that downpipe being discontinued we are unable to confirm fitment.
Ben L. @ RallySport Direct 7 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Installation Rg6_velocitraptor7 years ago
-
-
0 of
0 people found the
following answer helpful
A: You will need the OEM doughnut gasket as well as the 3inch adapter from GrimmSpeed.
Jared A. @ RallySport Direct 7 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Fitment dmiester123891017 years ago
-
-
0 of
0 people found the
following answer helpful
A: This will not fit the 2015 STI model, you will want part number INV HS15SW4GST for that which exits the right hand side. You will not use an adapter with an Invidia downpipe.
Nick S. @ RallySport Direct 7 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Mid-pipe SW1FT_FFC7 years ago
-
-
0 of
0 people found the
following answer helpful
A: The midpipes are not sold separately.
Nick S. @ RallySport Direct 7 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Invidia racing n1 single exhaust alexf70197 years ago
-
-
0 of
0 people found the
following answer helpful
A: This is a 3" catback and mounts to the existing location as stock. As long as your existing downpipe is stock length it should bolt up just fine but that depends on the model.
Nick S. @ RallySport Direct 7 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: draymond8 years ago
-
-
0 of
0 people found the
following answer helpful
A: This will be the louder setup between the two.
Nick S. @ RallySport Direct 8 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Midpipe evil-sti8 years ago
-
-
0 of
0 people found the
following answer helpful
A: The midpipe is not sold separately.
Nick S. @ RallySport Direct 8 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: 2014 WRX SEDAN daniel3238 years ago
-
-
0 of
0 people found the
following answer helpful
A: This will be a bolt on install. No welding will be necessary.
Brady R. @ RallySport Direct 8 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: 2014 WRX SEDAN daniel3238 years ago
-
-
0 of
0 people found the
following answer helpful
A: This is not the N1. This is the Racing Series and will be the louder option, as there is no resonator.
Brady R. @ RallySport Direct 8 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Invidia catback exhaust TWIN 2OH8 years ago
-
Q: Loaded question... Dakotat48 years ago
-
-
1 of
1 people found the
following answer helpful
A: This exhaust will be a little more quiet than the single tip exhaust. The only other one we sell without a resonator is the Cobb Cat Back exhaust. http://www.rallysportdirect.com/COBB-Tuning-515121-Cat-Back-Exhaust-Stainless-Steel
Tommy M. @ RallySport Direct 8 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: hatchback erit_erit356999 years ago
-
-
0 of
0 people found the
following answer helpful
A: We can only confirm fitment for the WRX Sedan 2008-2014 / STI Sedan 2011-2014 Models on this.
Brady R. @ RallySport Direct 9 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Question ! zach_ko512479 years ago
-
-
0 of
0 people found the
following answer helpful
A: We have not test fit this on a 2015 STI and we cannot confirm fitment at this time.
Zach G. @ RallySport Direct 9 years agoWas this answer helpful? -
0 of
0 people found the
following answer helpful
A: This will fit a '15 STI without modification. I have it installed on my personal vehicle. Super easy install, just sure you remember to get to a stock DP adapter if you are still running the stock DP.
WillG25Was this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Dual to Single Hanger Count GillsGoneWild9 years ago
-
-
1 of
1 people found the
following answer helpful
A: You will want 3 hangers as it will hold on the axle back portion.
Kyle A. @ RallySport Direct 9 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: 2013 WRX SEDAN DJHR9 years ago
-
-
0 of
0 people found the
following answer helpful
A: A tune is not required for just a catback.
Kirill C. @ RallySport Direct 9 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Gasket 14stiTR9 years ago
-
-
1 of
1 people found the
following answer helpful
A: You can reuse your OEM one if in good condition. If not I would purchase a new one.
Kyle A. @ RallySport Direct 9 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: gaskets tommyshibby9 years ago
-
-
1 of
1 people found the
following answer helpful
A: Included is two 3 inch 2 bolt gaskets. Which is enough to properly install this exhaust. If you are installing this to the stock downpipe, I recommend reusing your OEM donut gasket to make that connection. Thank you.
Sterling W. @ RallySport Direct 9 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: 2014 Wrx Sedan WRXotic10 years ago
-
-
0 of
0 people found the
following answer helpful
A: The racing one will not have a resonator in it, therefore making it quite loud. Personally the racing sounds better. This catback will fit 2014 a Sedan
Kyle A. @ RallySport Direct 10 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Resonator? dylanrawks10 years ago
-
-
0 of
0 people found the
following answer helpful
A: This is not resonated. The N1 is the counterpart to this that is resonated. In my opinion, this is going to be one of the loudest catbacks we offer, regardless of the downpipe. If thats what you're after, this is a great system!
Sterling W. @ RallySport Direct 10 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
