Invidia N1 Cat Back Exhaust - Subaru STI Hatchback 2008-2014 / WRX Hatchback 2011-2014
Manufacturer Part # HS08STIGTP
Bundle Savings:MSRP: $1,007.00
As low as $1,241.47
If you are looking for a great way to squeeze a little extra performance from your vehicle, then you will be pleased with the Invidia N1 Cat Back Exhaust System. There are several performance attributes that makes this an excellent upgrade. This exhaust system has been made from 304 stainless steel and features 76MM piping. The exhaust has also been designed with minimal bends to reduce the amount of turbulence during acceleration, allowing the engine to exhale the exhaust gasses with less restrictions. This means you will have improvements in throttle response, along with increases in both horsepower and torque.
This exhaust will come with a beautiful pair 101MM polished tips on premium mufflers, and the exhaust hangers are welded onto the stock location of the pipes so you don't have to perform further modifications.
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
Phantom wrx 9 months ago
Great exaust sounds good if you have a stock down pipe it's not to loud but it's still loud enough not much drone great exaust!
Colin 2 years ago
So install was not that bad especially if you have another hand to help. The sound is incredible, with just the stock DP and the cbe it has a deep rumble to it and is definitely loud. Ha I woke the neighbors up when I was doing a rev test with my buddy. Definitely worth every penny, recommend getting the stock DP to 3" cbe if you have the stock downpipe. Buyyyyy it, you know you want to.
SlooowWRX 3 years ago
I couldn't be happier with this exhaust. It's definitely loud, especially on a cold start, but not obnoxious or ricey. It has a very low rumble with a lot of bass, I get a ton of compliments on it. Perfect fit with the stock exhaust hangers and the dual tips look awesome. Tons of reviews complain about the drone.. if you don't want to hear that Boxer rumble, keep your car stock.
Way to lound for a hatch
R.Bloodscalp 4 years ago
Perfect fitment but too loud inside the car and drone alot
Rossrusconi12711 4 years ago
Very pleased with how it sounded, very easy to install And really straight forward, took me about an hour and half to instill and install new exhaust. I had read the welds were not very good mind seemed very done considering I weld for a living. Only thing is the I knew before purchasing one the left exhaust sticks out just a tad more But thankfully I'm OCD so it doesn't bother me. Shipping was amazingly fast super happy about that, will continue to shop here for sure.
QUESTIONS & ANSWERS
Q: Stock hatchback sti 08 Vic 8 months agoAnswer
My sti 08 is stock, do i need to do a tune if i put the n1 on? I've heard that it could do damage to the engine if you do mods and no tune.
A: A Catback alone like this one will not require a tune. Tuning would be required if you change out the downpipe as well so that might be what you heard previously.
Evan M. 8 months ago
Q: Fitment NotWrx 2 years agoAnswer
Will this fit a 2010 Subaru Impreza 2.5i sedan?
A: No this will not fit your car.
Chris W. 2 years ago
Q: Piping orlando.l.rivera0933182 2 years agoAnswer
Is there any muffler or restrictor in the actual piping? Or is it just the flex point and straight 3 inches of piping all the way back to the tips?
A: Flex joint, resonator, piping and then the muffler. The pictures are accurate as to what the exhaust will look like. And the actual tips are just under 4 inches.
Chris W. 2 years ago
Q: Flanges Colin 2 years agoAnswer
Do I need to purchase a donut gasket or other flanges to fit this to a stock downpipe?
A: You will need Grimmspeed's Adapter to ensure a leak free install with your Stock Downpipe. You can find the adapter by searching Part # GRM 077046
Brady R 2 years ago