Invidia Q300 Cat Back Exhaust Titanium Tip - Subaru STI Hatchback 2008-2014 / WRX Hatchback 2011-2014
Manufacturer Part # HS08STIG3T
Bundle Savings:MSRP: $1,467.00
As low as $1,241.47
This exhaust will come with quad titanium tips, and the exhaust hangers are welded onto the stock location of the pipes so you don't have to perform further modifications.
New gaskets and hardware, will be included to make this exhaust system ready for installation.
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
Do Not waste your money
Lagg-Alot 2 months ago
Sound nice and loud! Titanium Tips look great but are fastened to the stainless pipes with 3 rivets on each tip (impossible to weld Titanium to stainless steel). Tip started rattling within 1 week of use. No reply from Invidia Customer service. After about a month of use I noticed the crimped ends of the muffler (not welded) was leaking condensation water and exhaust gases. Also used to be able to lift my 2010 STI Hatchback from rear by sliding jack straight under the read differential. Cannot fit jack under the low hanging muffler so lifting car from rear is now a challenge. Wish I never bought this system. I will never buy any invidia product again as long as I live. I will tell my children to do the same. Hope I saved someone else the grief I feel.
Great sound and easy install with the Grimmspeed adapter
Nbarley12 3 months ago
Amazing exhaust, looks very good from the rear of the car and has a nice burble. The titanium tips are a great option that really make the rear of your car pop. Ordered through Vex Performance out of Calgary, AB who ordered for me from RSD. Easy install if you have an extra hand around. Drone is very minimal and completely gone at highway cruising speeds. Has the occasional pop and bang at 3,000-3,500rpm when you let off the gas :).
jermismo 6 months ago
The exhaust sounds great outside the car, but between 1800 and 2500 RPM it drones like crazy (2011 WRX Hatch). Makes your ears feel like they need to pop. It wasn't that bad when I first installed it, but it seems to have gotten worse over time. I've probably had it on for about 1000 miles. Sound deadening didn't help.
ShoGunMacias 10 months ago
Build quality is excellent! I have it paired with a GrimSpeed DG DP and stage 2 map from Cobb. Power gains are very good! I felt a more precise turbo spool and much better top end power. The sound is just what I was looking for, very deep rumble and not to loud and nice note at idle. If you have the little extra cash get the titanium tip option it looks super cool and very tasteful. Overall very satisfied with the purchase, and thanks to Rallysport for the super fast shipping! Got it in one day!
savage 12 months ago
I owned this exhaust for almost 5 years now and i must say i really like it. I have it paired with invidia catless dp, all in all its not that loud inside the cabin but if your behind its pretty loud and it actually looks like stock from behind.
QUESTIONS & ANSWERS
Q: Downpipe Compatibility AndrewK 8 months agoAnswer
Hey guys, I've got a hyperflow downpipe (http://www.carmodsaustralia.com.au/down-pipe-with-metal-cat-wrx-08-14-sti-08-15) currently on my 2012 wrx hatch. Just wanting to know if the Q300 is compatible?
A: This will work with most downpipes but its best to talk to the manufacture of the downpipe to ensure it fits.
Luis L. 8 months ago
Q: Cobb downpipe Abbwrx 9 months agoAnswer
I purchased this payback recently and I'm interested in purchasing the cobb downpipe eventually after I get an accessport, I understand the that cobb piping size for the downpipe is 2.5 inches while invidia midpipe is 3, are there adapters of any sort to make them compatible or will it have to be cut and welded together?
A: To get the best seal with the Cobb downpipe, an OEM downpipe to 3 inch catback adapter would be recommended like INV HS02SWIAPE or GRM 077046.
Evan M. 9 months ago
Q: Compatability with 07 legacy 2.0R Legacy07 1 year agoAnswer
Title pretty much says it all, will this work with an 07 Naturally Aspirated DOHC Legacy? Thanks
A: This is not a direct fit for your legacy, major modification would be required to make it work.
Connor M. 1 year ago
Q: midpipe itsjeffree 2 years agoAnswer
does the q300 and n1 dual have the same midpipe?
A: Yes they will have the same mid pipe as they are both routed the same way underneath the car.
Chris W. 2 years ago
Q: Silencer TiE10 2 years agoAnswer
I see you guys offer some silencers. I bought this exhaust a while back and love it but want to put a silencer occasionally; do you know which one would work best with this? Also, are there any assemblies available like in the Varex system using a solenoid/actuator controlled flap to close off a couple some of the tips on demand (of course would require custom modification to the exhaust)?
A: Invidia does not produce a silencer for Q300 exhausts at this time. Invidia doesn't have an adjustable baffling system currently. You may be able to fabricate such a system, but that would be a custom job.
Brady R 2 years ago