SET YOUR CAR
FREE SHIPPING
On orders over $100
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

Invidia Racing Series Cat Back Exhaust Titanium Tip

MODEL # INVHS02SW1GRT

$811.00


  • Q: loudness  rtkimble013 months ago

    is this an aggressive sounding exhaust
  • Q: Exhaust rubbing on bottom of car.   Warsaw683 months ago

    I have done some reading about this exhaust, and it says it rubs On the bottom of the car? And to fix it they said I would have to get longer hangers, My question is has invida fixed the issue of the hangers not being long enough?
  • Q: 2003 Subaru Legacy B4 RSK invidia N1  TheJDMLegacy4 months ago

    Does this exhaust fit on the JDM legacy? It's got the 2.0 turbo engine on it.
  • Q: Fitment  1flyblobeye12 months ago

    I have a 2005 wrx and currently I have a turboxs turboback exhaust on it, was wondering if the invidia n1 would fit on the turboxs downpipe? This is also turboxs’s 2 piece downpipe, which is why I’m asking
  • Q: Flex Pipe  Johnny Blaze1 year ago

    Just wondering if this exhaust has a flex pipe section that may not be pictured. I'm asking because I noticed the regular N1 catback has a flex section, and I'm just worried about this piping not having enough movement to prevent cracking.
    • 1 of 1 people found the following answer helpful

      A:  The full race series does NOT come with a flex pipe. Most of our photos are done in house and this is exactly what you will get.

      Tyler A. @ RallySport Direct 1 year ago  
        
      Was this answer helpful?
  • Q: Fitment   Shadee1 year ago

    Will this exhaust fit an 02 wrx wagon
  • Q: HP gains  Nelson Asay2 years ago

    So this maybe a very stupid question to ask. But I was looking through all the cat back exhaust listed through here, and the HKS racing cat back caught my eye. Which one between this one and the HKS racing has the most power and torque gains?
    • 1 of 1 people found the following answer helpful

      A:  Invidia does not have the write-ups/dyno sheets for their exhausts. In all honesty they don't really add much power. They just save more weight.

      Tyler A. @ RallySport Direct 2 years ago  
        
      Was this answer helpful?
  • Q: fit  zachheck2 years ago

    I have a 04 WRX with a stock down pipe. Will this mount to the stock down pipe or will I have to change it thanks.
    • 0 of 1 people found the following answer helpful

      A:  This will mount to the stock downpipe but we would recommend using GRM 077046 so you do not experience any leaks. A new donut gasket is also recommended. GRM 020099

      Tyler G.
        
      Was this answer helpful?
  • Q: Fitment and Weight  SOY3 years ago

    Wondering what the overall weight of this system is. I saw that the titanium is nearly 20 lbs less than stock. Also I have a 06 impreza wagon. It is not a wrx nor sti model. Wondering if this will bolt up as I imagine the cat. is in the same location on both cars? I intend to do a full swap in the future as well
    • 0 of 0 people found the following answer helpful

      A:  The Shipping weight is 33.86LBS, as far as this bolting up to an NA Subaru we are not able to confirm fitment.

      Jared A. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: 2007 WRX TR Fitment  spleuba310443 years ago

    I have a 2007 WRX TR with a stock downpipe. What do I need to buy in addition to this exhaust to have a smooth installation and fitment with the downpipe and the hangers? Thanks.
  • Q: Is it legal in Ohio?  Jcondi553 years ago

    Is this exhaust legal (sound and emission wise) in Ohio? The state is strict with what you can mod
    • 0 of 0 people found the following answer helpful

      A:  We are not able to confirm legality. We recommend contacting your local DOT or EPA for more information.

      Josh P. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: 2016 wrx premium fitment  Mattyboi5623 years ago

    Does this fit on a 2016 wrx premium? ..... Is this exhaust louder than the single exit invidia n1
    • 0 of 0 people found the following answer helpful

      A:  No this will not fit a 2016 WRX, and it would possibly be a little bit louder as it doesn't have a resonator.

      Chris W. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: exhaust  Joe's wrx3 years ago

    I Have this product installed in my 2002 subaru WRX. is there a specific downpipe an header for this exhaust? if not which would be the best fit performance wise? an this says it comes with the silencer is it installed already to the exhaust or was it a separate part that can be added if i wanted? i purchased the car with this exhaust thats why i dont know if the silencer is on or not. thanks
    • 0 of 0 people found the following answer helpful

      A:  As long as no modifications were made to the exhaust this should fit any OEM replacement downpipe or header for your vehicle like the Invidia, Grimmspeed, and so on. The silencer goes inside the exhaust tip and can be seen looking at the rear of the vehicle if it is installed.

      Nick S. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Difference.   Ethang3 years ago

    What is the difference between this and the invidia n1? If any.
  • Q: 2002 wrx motor mounts  Joe's wrx3 years ago

    So I purchased my 02 wrx about a month ago an I need new motor mounts. What can be the effect of holding off on motor mounts. An can someone point me to some OEM motor mounts an some after market ones? Idk which to get thanks!
    • 0 of 0 people found the following answer helpful

      A:  Bad motor mounts can cause a lot of vibration and can eventually destroy the mount bushings causing clunking and unwanted movement. Here are some aftermarket motor mounts CUS 660 911 SET

      Chris W. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Fitting  Yannick 3 years ago

    hey guys would this cat back exhaust fit my 2004 Subaru R.S 2.5
    • 0 of 0 people found the following answer helpful

      A:  This is not confirmed to fit your vehicle and is only guaranteed fitment for turbo models.

      Nick S. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Tuning   Ethang3 years ago

    I'm looking to buy this and a downpipe. Do I need to tune it? And how much does a tuning cost? And how easy is it to tune if I could do it by myself?
    • 0 of 0 people found the following answer helpful

      A:  A downpipe will require a tune but a catback by itself would not. Many people use the COBB Accessport and COBB's off the shelf maps for a simple tuning solution if their modifications fit their maps, otherwise taking the vehicle to a local tuner is recommended. Tuning yourself is not recommended without proper instruction or experience.

      Nick S. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Invidia racing catback exhaust.   Ethang3 years ago

    Hello I was wondering if this added any horsepower?
    • 0 of 0 people found the following answer helpful

      A:  A catback can help increase power but it is very minimal. In most situations it is a styling accessory with higher volume but at higher horsepower levels the OE catback can become a bottleneck and a 3" catback will be much more beneficial.

      Nick S. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Wheres the Cat??  SKlawon4573 years ago

    Its named a Cat Back Exhaust but I dont see a cat? And would this throw any codes due to the fact there there isnt a socket for the o2 sensor on neither the race or regular exhaust? So I would need to buy a catted downpipe then or no?
    • 0 of 0 people found the following answer helpful

      A:  The term "catback" refers to starting at the catalytic converter pipe flange and continuing to the back of the vehicle. A catback system does not include a catalytic converter and most aftermarket systems for Subarus include that in the downpipe if at all.

      Nick S. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Fitment and gaskets  highway9kerr126763 years ago

    Will this work with the HKS catless Downpipe and do I need any gaskets?
    • 0 of 0 people found the following answer helpful

      A:  As long as the HKS downpipe has a 3inch flange, this should be a perfect fit. You will need a 3inch gasket to go in between the flanges.

      Trevor C. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: orientation  nick3 years ago

    why is the Ti tip not angled but the stainless one is
    • 0 of 0 people found the following answer helpful

      A:  Both exhaust should be set at the same angle. feel free to call us if you see something we dont on a exhaust.

      Trevor C. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: fitment   nick4 years ago

    does this require a test pipe to install if i have the v2 invidia downpipe
  • Q: Exhaust  lanebauman777535394 years ago

    Do I need extra long hangers or will own hangers work? What about a heat shield for my bumper or will I be fine without?
    • 0 of 0 people found the following answer helpful

      A:  invidia recommends OEM hangers but its always good to monitor fitment and purchase hangers if needed. As for a Heat Shield, it is not mandatory with any aftermarket exhaust but it is good to monitor if it is to close to your bumper

      guest566b4fa62a8d25ff038cadad @
        
      Was this answer helpful?
  • Q: any way to just get  scottw24y160374 years ago

    i have the n1 with the resonator is there any way i can get a straight test pipe to eliminate the resonator
    • 0 of 0 people found the following answer helpful

      A:  Unfortunately the midpipe is not available separately. However, you would be able to take your car to an exhaust shop to have the resonator cut off and a straight pipe welded in.

      guest56ad69792a8d256e198b66b5 @
        
      Was this answer helpful?
  • Q: Invidia catted Downpipe   Cyber_mad15587504 years ago

    I have an invidia catted Downpipe will this fit with no leaks
    • 0 of 0 people found the following answer helpful

      A:  Yes, this Cat back is designed to work with the Invidia downpipe and other 3 inch 2 bolt downpipe.

        
      Was this answer helpful?
  • Q: Fitment  TylerH4 years ago

    Would this exhaust fit on my 2006 Impreza 2.5i?
    • 0 of 0 people found the following answer helpful

      A:  This catback exhaust is specifically for turbo models and we cannot guarantee fitment on a 2.5i.

      Zach G. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: Downpipe fitment   Gus Jeffries4 years ago

    Would this fit to a Perrin rotated downpipe?
    • 0 of 0 people found the following answer helpful

      A:  Yes, The Perrin Downpipe is designed to be the same length as the standard downpipes so aftermarket or OEM catbacks work.

        
      Was this answer helpful?
  • Q: Mid pipe fitment  lanebauman777535394 years ago

    Hey I have a 3 m2 mid pipe on my 2004 wrx sedan and I was wondering if I could keep that on and use just the axle back part of this catback? Would it bolt rite on without a leak? Or would that not work?
    • 0 of 0 people found the following answer helpful

      A:  We are not able to confirm fitment of this axle back on anything other than Invidia midpipes. It is not OEM length and will more than likely not work with any other brand.

      Zach G. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: Hey   02scoobybutts4 years ago

    I have a 02 subaru impreza 2.5L and I'm wanting to buy this exhaust and I heard it will fit if I adjust the flanges. My question is will it work? Thanks