Invidia Titanium Tip Racing Cat Back Exhaust Single - Subaru WRX/STI 2015+
Manufacturer Part # HS15SW4GST
Bundle Savings:MSRP: $772.00
As low as $1,944.23
If you are looking for a great way to squeeze a little extra performance from your vehicle, then you will be pleased with the Invidia Q300 Cat-Back Exhaust System. There are several performance attributes that makes this an excellent upgrade. This exhaust system has been made from 304 stainless steel and features 76mm piping. The exhaust has also been designed with minimal bends to reduce the amount of turbulence during acceleration, allowing the engine to exhale the exhaust gasses with fewer restrictions. This means you will have improvements in throttle response, along with increases in both horsepower and torque.
This is a single exit exhaust system featuring a premium Q300 muffler and a titanium tip. Exhaust hangers are welded onto the stock locations which means you don't have to perform further modifications to the body or chassis for fitment.
New gaskets and hardware will be included to make this exhaust system ready for installation.
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
jagerking454 9 months ago
This is the second time (first time on a 2014 STI now on a 2017 STI) I have bought this exhaust with the grimspeed 3in adapter and 2 of the drop bushings. The exhaust is great. Loud especially with the windows down and does not drone on the highway, but depending on your speed can be loud. That is solved with the silencer but I have noticed that it will rattle at idle.
2016 Sti N1 Race
Ryan24_7_ 1 year ago
Exhaust came in with in a week of ordering it. Packaging was good and everything was spot on. Installation was fairly easy and took within an hour to do. The hardest part is removing the stock exhaust. This N1 race is noticeably loud, almost too loud at times. Nevertheless this exhaust is amazing and sounds great. Whenever you down shift you always get those pops which makes driving more enjoyable. Would highly recommend this to someone who wants a loud exhaust
Great sound... Duh
redhedraz 2 years ago
I've always been impressed with Invidia and their products. This is my second purchase from Invidia. I plan on also purchasing their straight J-pipe to compliment an affordable full exhaust bolt on. Fitment is good and installation is easy, even with only a jack or drive up lifts.
What i was looking for
SUBI DREW 2 years ago
I am very pleased with this catback. It was not hard to install. I did it by myself with minimal space to work. Uninstalling the factory exhaust is harder than installing the new one. The sound is great it adds a lot of bass to the car with virtually no drone.
QUESTIONS & ANSWERS
Q: exhaust subarusti18 4 months agoAnswer
i have bought this exhaust for a 2018 wrx base and i recently traded it for a 2018 sti will this exhaust still fit
A: This should fit on your 2018 STi, although you will need an adapter if you're installing it with a stock downpipe.
Marcus E. 4 months ago
Q: 2017 STi Fitment ThatSTiGuy 6 months agoAnswer
I have a stock 2017 STi, and I purchased this exhaust second hand, but it didn't come with gaskets or the adapter. Could you reference the part numbers of what gaskets and adapter I'll need ( if needed) to fit this up correctly? I figured it would be something like 2x 3 inch gaskets, 1x 2.5 inch gasket, and the adapter?
A: That is correct, you would need (2) 3" gaskets, (1) 2.5" gasket and the Stock Downpipe to 3" Catback Adapter.
Brady R 6 months ago
Q: 2018 wrx AAronWRX 6 months agoAnswer
Does this bolt straight on to a stock 2018 wrx or do i need anything else?
A: You will need a catback adapter.
Tyler A. 6 months ago
Q: 2018 Wrx retnuhhunter 10 months agoAnswer
Would I need an adapter to run this with my stock J pipe?
A: Yes you will. You will need a stock downpipe to 3 inch cat back adapter. Invidia sells one.
Tyler A. 10 months ago