SET YOUR CAR
FREE SHIPPING
On Orders of 99+.
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

Brian Crower Stage 3 280 Camshafts

MODEL # BRIBC0622

$936.76


  • Q: Brian crower stage 3 280 cams   Subie guy 2 years ago

    Would these fit on my 05 Impreza rs? My heads are potted and polished and redone would I also have to get bigger injectors or would the stock ones work?
    • 0 of 0 people found the following answer helpful

      A:  No, these are for the DOHC AVCS cylinder heads in the STI, not for the SOHC motor in the RS.

      Lane H. @ RallySport Direct 1 year ago  
        
      Was this answer helpful?
  • Q: Avcs Cams with non-AVCS gears  Tcschon2922202 years ago

    Will non AVCS gears work with these? I was told that they would but mine are leaking... can they be sealed so they don’t leak or do I need AVCS gears? Stock AVCS gears don’t seem to fit on these cams.
    • 0 of 0 people found the following answer helpful

      A:  The reason you may be leaking is due to the cam gear bolts. If you reused your stock cam gear bolts, they are hollowed out to allow oil through.

      Jesse F. @ RallySport Direct 2 years ago  
        
      Was this answer helpful?
  • Q: Question  cornfed_07wrx2 years ago

    Can the 280 cams be used with the GSC beehive springs/retainers in b25 heads? I'll have new GSC valves aswell
    • 0 of 1 people found the following answer helpful

      A:  It sounds like you are using heads from a 2008+, if that's the case you would want different cams. Give us a call and we can help you find the right cams.

      Lane H. @ RallySport Direct 2 years ago  
        
      Was this answer helpful?
  • Q: Valve spring and retainer   Azza3 years ago

    Can I use other brand spring and retained combos instead of the BC kit with these cans
    • 0 of 0 people found the following answer helpful

      A:  As long as the valve spring and retainer kit you are using is rated for the lift that these provide, you should not have issues.

      Marcus E. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Brian crowder stage 3 280 cams  Rod 4 years ago

    What are the specs for valve lash? Same as oem?
    • 1 of 1 people found the following answer helpful

      A:  The valve lash on the BC0622 cams is .006" to .008" on the intake and .008" to .010" on the exhaust.

      Brady R @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: Brian crower 280 cams 06 sti  Nakedzebra4 years ago

    Will these work with the single avcs? Probably but no one refrences it here or on the web...
  • Q: head work?  ibralibra91507818 years ago

    Do I need any significant work done to the heads to run these cams?
    • 0 of 0 people found the following answer helpful

      A:  Machining should not be necessary, but you will need to use valve spring/retainer kit part number BC0600.

      Zach G. @ RallySport Direct 8 years ago  
        
      Was this answer helpful?