- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Features & Product Details
On this page, you are looking at the Whiteline Steering Rack Bushings.
The stock steering rack bushings are soft, allowing for the steering rack to have excessive movement. This movement disconnects the driver from the valuable feedback provided via the steering wheel. By upgrading the bushings you will notice quicker initial turn in and a better driving experience. As with all harder bushings, a bit more noise and vibration will be transferred into the vehicle compared to stock.
Note that because these bushings are stiffer, there may be inherent vibration. An install assist tool will be included to make these bushings ready for the installation.
Specifications
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
EjRey
While I had my rack down for pinion seal repair, it was convient to upgrade these bushes. What a difference! While not taking out al of the compliance, and not as hard as metal bushed, this is the perfect upgrade for those who want to feel what the tire is doing off center. Ran them on a track day and I had much more confidence and feedback. Downside is that I fet more of the bumps on street and track as this amplified the reflected intertias into the steering wheel. Very smart upgrade for those who was less of a civilian feel to their Subaru
joejoe69
I replaced my power steering rack & pinion from the usual leak at the valve body and figured since I'm dropping the old one, I might as well upgrade the bushings on the new one. I don't know about you guys but I could feel a difference in initial response as the slop it greatly reduced. You don't have to fully remove your rack and lines to replace these, you can just drop it down about one and a half to two inches from the subframe and let the supplied sleeve tool do its job.
Marlowe
Product quality is great but installations do not include torque settings. Per manual, bolts need to be tightened at 44 lb-ft... I followed this and resulted into 2 stripped threads in the nut welded inside the subframe. Buy helicoils ahead of time just in case!!!!
EC_626
Installed this along with the Cusco Steering Rack Brace, with both it definitely improved the steering response; taking away that unpredictable loose feeling. Great upgrade, not difficult to install with the right tools.
Jesse
Honestly, i didn't see too much of an improvement especially considering the difficulty of the install.
QUESTIONS & ANSWERS
-
Q: Steering wheel feel Malammadi4 years ago
Hi, would this make the steering wheel feel firmer on normal use?
-
-
0 of 0 people found the following answer helpful
A: Upgraded steering rack bushings will provide more feedback through the steering wheel and better steering response for normal and spirited use.
Zach G. @ RallySport Direct 4 years agoWas this answer helpful? -
0 of 0 people found the following answer helpful
A: This kit would not have a noticeable affect on steering effort, but would increase steering feel and response under most driving conditions.
Jonathan @ Whiteline @ Whiteline 4 years agoWas this answer helpful?
-
0 of 0 people found the following answer helpful
-
Q: Poly? motoboy0225 years ago
-
-
1 of 2 people found the following answer helpful
A: Polyurethane is the material that they are manufacture out of.
Kirill C. @ RallySport Direct 5 years agoWas this answer helpful?
-
1 of 2 people found the following answer helpful
-
Q: Ramps vs stands BGlasberg5 years ago
-
-
0 of 1 people found the following answer helpful
A: I would personally use jack stands to install this product.
Nick S. @ RallySport Direct 5 years agoWas this answer helpful?
-
0 of 1 people found the following answer helpful
-
Q: install time? nickgordon111723095 years ago
-
-
0 of 1 people found the following answer helpful
A: You will want to contact your local shop for labor on this, but I would have to guess no more than 2 hours.
Kyle A. @ RallySport Direct 5 years agoWas this answer helpful?
-
0 of 1 people found the following answer helpful
-
Q: Subaru Legacy 2010 model 2.5i gborja8887 years ago
-
-
0 of 1 people found the following answer helpful
A: Unfortunately I do not show that this kit is compatible with any 2010+ Legacy models and I do not show there are any steering rack bushing kits available for those models at this time.
Tanner S. @ RallySport Direct 7 years agoWas this answer helpful?
-
0 of 1 people found the following answer helpful
