SET YOUR CAR
FREE SHIPPING
On Orders of 99+.
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts
Product images
Product Media
Brian Crower Stage 3 280 Camshafts - Subaru WRX 2002-2005
Brian Crower Stage 3 280 Camshafts - Subaru WRX 2002-2005
Brian Crower Stage 3 280 Camshafts - Subaru WRX 2002-2005

Brian Crower Stage 3 280 Camshafts

Subaru WRX 2002-2005

Was: $839.86
$739.08
You save:
12%
($100.78)
msrp: $839.86

Only 2 left!
You will earn Reward Points with this Purchase.
ANY QUESTIONS?

Features & Product Details

RallySport Direct carries a great variety of drivetrain upgrades brought to you by Brian Crower. 

Here, you are looking at the Brian Crower Stage 3 280-Degree Camshafts. These have a longer duration profile along with an added RPM potential. These cams are intended for a fully built engine, where tuning and upgraded valve springs and retainers are required. 

 

STAGE 3:

  • Advance / Duration: 280/280
  • Duration @ .050: 234/234
  • Lift (in): .425"/.425"
  • Lift (mm): 10.80/10.80
  • Rocker arm ratio (intake) 1:1
  • Rocker arm ratio (exhaust) 1:1
  •  

     

    Specifications

    Brand: Brian Crower
    Cam Exhaust Duration: 280
    Cam Exhaust Lift: 10.8mm
    Cam Intake Duration: 280
    Cam Intake Lift: 10.8mm
    Location: Intake and Exhaust
    Machining Required: No
    QTY: 4
    Springs Required: Yes
    Mfgr. Warranty: No Warranty
    Condition: New Product
    Return Policy:
    Standard

    PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED

    REVIEWS & CUSTOMER MEDIA

    Be the first to write a review

    QUESTIONS & ANSWERS

    • Q: Good for Hybrid Build?  agdkjh2 years ago

      Looking to use my s20 heads (machined to fit ej25) with these 272 cams. Will they work for daily/fun driving?
      • 0 of 0 people found the following answer helpful

        A:  These are 280 duration cams. I would consult your engine builder for suggestions on which cam to choose.

        Lane H. @ RallySport Direct 2 years ago  
          
        Was this answer helpful?
    • Q: Cams  Tt4 years ago

      Are these cams good for 450+ hp.
      • 0 of 0 people found the following answer helpful

        A:  You'll want to consult your engine builder for the best answer for your specific build and turbo setup, but I would go for a 272 duration cam or similar if you're looking for ~450whp. Anything larger will have a very narrow powerband on the 205.

        Marcus E. @ RallySport Direct 4 years ago  
          
        Was this answer helpful?
    • Q: Cams  Tt4 years ago

      Are these cams good for 450+ hp.
      • 0 of 0 people found the following answer helpful

        A:  You'll want to consult your engine builder for the best answer for your specific build and turbo setup, but I would go for a 272 duration cam or similar if you're looking for ~450whp. Anything larger will have a very narrow powerband on the 205.

        Marcus E. @ RallySport Direct 4 years ago  
          
        Was this answer helpful?
    • Q: 04 sti  Tt4 years ago

      Ok I'm going with cosworth titanium duel valve springs Manley valves. An 8.2-1 piston and Manley h tuff rods. What size cams should I get. Would like to see 450+hp. Gt30r turbo.
      • 0 of 0 people found the following answer helpful

        A:  It depends on what you are building the car for and the redline. I would recommend giving us a call at 888-45-Rally so we can go over your build and get the best option for you!

        Megan L. @ RallySport Direct 4 years ago  
          
        Was this answer helpful?
    • Q: What all is needed to run these cams?  SubiWRX034 years ago

      I know that I need the upgraded valve spring kit. Are aftermarket valves recommended? Do I need to adjust the valve shims even if I run the bc spring kit?
      • 0 of 0 people found the following answer helpful

        A:  Yes, We recommend upgrading the whole valve train.

        Luis L. @ RallySport Direct 4 years ago  
          
        Was this answer helpful?
      • 0 of 0 people found the following answer helpful

        A:  Aftermarket valves are not mandatory but recommended for high RPM applications. The cams have the same base circle as the OEM cams but you will need to check the lash on installation. They like .008" on the intake and .010" on the exhaust.

        Megan L. @ RallySport Direct 4 years ago  
          
        Was this answer helpful?