SET YOUR CAR
Buy Now, Pay Later!
FREE SHIPPING
On orders over $200
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

Tial Q Blow Off Valve 11 Psi Spring Blue

MODEL # TIA Q.11B

$267.04


  • Q: Atmospheric 50/50?  CHRISti2 years ago

    Can this bovine be adjusted to 50/50?
  • Q: Tial Q bov   djjefferson56e492894ea8c3b4448b45c73 years ago

    So I had just purched the Grimmspeed top mount intercooler and a tial Q bov and I'm just wondering if I'll need and different flange so that I can instal the bov?
  • Q: 2014 STI  Miguelo3 years ago

    How do i know witch spring to use ? my sti is 14.7 psi .And how much psi it can hold? thank u
    • 0 of 0 people found the following answer helpful

      A:  The spring you need is based on the vacuum your car pulls at idle. You will need to get a vacuum reading from an Accessport, Boost Gauge, or Factory Diagnostic Tool. After you have this measurement, refer to the provided table to see which spring would be best. This BOV does not have a specific rating for boost pressure.

      Josh P. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Flange material  01_RSTI3 years ago

    Hi, I wanted to know what material the included flange is made out of? Aluminum, mild steel or stainless. Thanks!
  • Q: springs   rubensahagunjr907444 years ago

    will this bov come with the extra springs listed above or will i have to purchase separate
    • 0 of 0 people found the following answer helpful

      A:  Springs for the Tial Blowoff Valves must be purchased separately, this unit comes with the 11 PSI spring pre-installed.

      Nick S. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  No, This BOV will only come with the 11 PSI spring. If a different spring is needed for your setup, you will need to purchase the correct spring separately. Spring options can be found in our Blow Off Valve Springs section.

      Brady R. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: Evo X  Danny A.4 years ago

    What flange would I need to get so I can mount this on my 2008 GSR?
  • Q: fitment  Mstockhofer76 years ago

    im doing a build on my 03 wrx and its getting a sti top mount on it. will this fit with no clearence issues?
    • 0 of 0 people found the following answer helpful

      A:  This is a universal valve, so you would have to weld on the flange, to a WRX/STi specific flange. With that said, this should fit without a problem, but unfortunately we would not be able to guarantee fitment, so best to make sure it will work for your application. Thanks.

      Rick C. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: Work on wrx 2011  Leandro6 years ago

    Hey this bpv work with a wrx 2011 sedan? What adaptation need to work??
    • 0 of 0 people found the following answer helpful

      A:  This is a universal blow off valve and is not designed for one specific vehicle. At this time, we do not have any Tial specific flanges for the 2011 WRX. You will need to make some alternate modifications to make this valve fit. Thank you.

      Sterling W. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?