SET YOUR CAR
As low as 0% APR - Buy Now, Pay Later!
FREE SHIPPING
On orders over $200
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

Nameless Performance Muffler Delete Double Wall Polished Tips

MODEL # NAM RSPD034

$329.00


  • Q: Type Ra  Bonesaw1 month ago

    Will this fit the 2018 type ra?
    • 0 of 1 people found the following answer helpful

      A:  Yes it will.

      Devan M. @ RallySport Direct 1 month ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  No! This does not fit the 2018 STI TYPE RA!

      StiTypeRA
        
      Was this answer helpful?
  • Q: Fitting  benburu5812 months ago

    Will a nameless axle back for 2016 sti fit my 2013 sti?
  • Q: Fitment   Connor 12 months ago

    Will this fit on an ets non resonated midpipe?
  • Q: Nameless/invidia N1  cracch21374511 year ago

    I have an invidia n1 cat back exhaust on my 2015 sti I was just curious if nameless axle back can bolt up by swapping out the mufflers
  • Q: Rubber Hangers  MagicGuy2 years ago

    I've heard some people of using different rubber hangers for the exhausts as they don't fit evenly or don't hang even. Do you recommend on getting different bushings?
    • 0 of 0 people found the following answer helpful

      A:  Your stock hangers should work just fine. But if you are wanting to try some aftermarket urethane hangers, the Kartboy, Cobb, and Perrin are all good choices.

      Josh P. @ RallySport Direct 2 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  I reused my stock hangers with no issues at all. Only issue I had was having to adjust the orientation of the rubber hangers and their placement on the Nameless hanger pieces (the forward and back placement to allow the piping to line up properly) but that wasn't too difficult. Easiest way to get the hangers off the factory mounting points is to get one side (top, bottom, either side) to slip past the small rounded piece on the end and then the rest of the hanger comes off easily. Best of luck!

      Elmacanite @
        
      Was this answer helpful?
  • Q: Need More Sound  Waseem Mahayni2 years ago

    I have installed These Nameless muffler deleted axle back. but i still need more sound, what do you recommend?
    • 0 of 0 people found the following answer helpful

      A:  I would recommend getting a cat back system or purchasing the Nameless midpipe to make your existing setup a catback. The part number for their midpipe is NAM RSPD039.

      Josh P. @ RallySport Direct 2 years ago  
        
      Was this answer helpful?
  • Q: How do I know if I have spt exhaust?  Alfredo's Sti2 years ago

    I have a 2016 sti limited, how can I tell if I have spt exhaust? I really want to purchase this exhaust but don't know if I have spt exhaust.
    • 0 of 0 people found the following answer helpful

      A:  The factory SPT/STI option is an aftermarket OEM catback produced by Subaru, the way the exhaust routes is different and the two flanges under the bumper are not symmetrical. The Y-pipe has a flange coming off to the side while the other continues to extend to the muffler tip. Photos can be found online for more information.

      Nick S. @ RallySport Direct 2 years ago  
        
      Was this answer helpful?
  • Q: Nameless Performance Muffler Delete Part#: NAM RSPD034  Alfredo's Sti2 years ago

    I have a 2016 Sti Limited, but noticed it says in the description that it will not fit on spt, how do I know if I have spt exhaust or not?
    • 0 of 0 people found the following answer helpful

      A:  The factory SPT/STI option is an aftermarket OEM catback produced by Subaru, the way the exhaust routes is different and the two flanges under the bumper are not symmetrical. The Y-pipe has a flange coming off to the side while the other continues to extend to the muffler tip. Photos can be found online for more information.

      Nick S. @ RallySport Direct 2 years ago  
        
      Was this answer helpful?
  • Q: 2016 wrx base  Bking121003 years ago

    Been looking into getting an axle back for alittle more umph, out of 1-10, what would you rate this for loudness compared to the stock exhaust? Just got rid of a supercharged cobalt with a Magna flow exhaust, I rated that at an 8, it also dumped right under the trunk. Looking for a tame solid sound with keeping my warranty!!
    • 0 of 0 people found the following answer helpful

      A:  My 1-10 scale might not be similar to yours. I would say this is around a 4-5. This exhaust will give you more sound compared to stock. You could start with this axle back and then move to more exhaust options if you wanted more sound.

      Chris W. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Midpipe options  nick3 years ago

    What midpipes work with this axelback?
    • 0 of 0 people found the following answer helpful

      A:  This is designed with the OEM mid pipe in mind and we cannot confirm fitment with any aftermarket midpipes.

      Brady R @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Invidia N1 Axel swap  nick3 years ago

    Can an Invidia N1 catback exhaust be swapped for this axel back while retaining the invidia n1 y-pipe/midpipe?
    • 0 of 0 people found the following answer helpful

      A:  The Invidia N1 midpipe will not work with this setup and the Nameless axlebacks require the OEM midpipe or OEM fit equivalent.

      Nick S. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Nameless axelback  Wrxcks 3 years ago

    How many miles is the minimum on the car before installing the axelback muffler delete?
    • 0 of 0 people found the following answer helpful

      A:  There is no specific minimum set by the manufacturer on when the best time installing an axleback would be. The axleback does not alter the vehicle enough to have any issue with installation on a new vehicle.

      Nick S. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Cobb Turboback fitment  mindlessheretic9894193 years ago

    Will this fit on the Cobb Turboback as a muffler delete?
    • 0 of 0 people found the following answer helpful

      A:  We are not able to confirm fitment of these muffler deletes on any exhaust other stock because most manufacturers do not use stock location flanges for the mufflers.

      Zach G. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: N1 Fitment  AMSMITH3 years ago

    Would this be compatible with replacing the Invidia Dual N1 mufflers?
    • 0 of 0 people found the following answer helpful

      A:  This would not mate up to the Invidia midpipe, you would have to switch to the OEM or another OEM fit midpipe.

      Nick S. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Tuning required?  Trey2015WRX3 years ago

    Is it required to get my '15 WRX tuned if I put this on? Thanks
    • 0 of 0 people found the following answer helpful

      A:  No tuning will be required when this is installed.

        
      Was this answer helpful?
  • Q: Muffler delete w/ downpipe  hammerlingk3982123 years ago

    If I wanted to get the Nameless Performance Muffler Delete and also get the Killer B Motorsport Down Pipe / Catless Intermediate Combo would I have to get a Y-pipe to connect the two?..