Nameless Performance Muffler Delete Double Wall Polished Tips
Manufacturer Part # RSPD001
Factory fit laser cut flanges and 2in dual piping has equivalent cross sectional area of a 2.85in straight pipe, providing excellent breathing characteristics for high end horsepower as well as retaining low end torque.
Quad Staggered Double Wall Round Tips: These are T304 stainless, double wall polished tips that fit perfectly into the cutout in the rear valence of the vehicle. 10 Degree Angle Cut with staggered arrangement (inboard tips stick out 1/2in further than outboard tips). 3in diameter per tip.
The install is simple and straight forward. Comes with new hardware and gaskets.
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
Mrgregory41242 3 months ago
I watched every video I could find on this product. Finally I pulled the trigger and bought them. I am so happy I did!! Only negative I can say is one tip sticks out a quarter inch more than the other. It is the perfect balance of rumble and subtitleness. I have a catless down pipe which added some extra sound to the stock exhaust. I wanted to keep the quad tips but liked the sound of the N1. This has the rumble of the N1 but more aggressive. The N1 has a softer tone to it. Doesn't take long to install depending on condition of the current hardware . For me living in the northeast I had lots of rust build up on the stock hardware (so don't mind how filthy my car is) I had a problem with one bolt. If I hadn't had that install would have taken a half an hour so. I would suggest using a breaker bar if you have one. If not invest in one! Overall great product would suggest to anyone who doesn't want to have that huge can hanging out the back of there car.
10 months ago
I got this thinking it would be good sound just be for a short time until got a full/complete turbo back system for my 2011 STI... I quickly fell in love with the sound and this will be staying on. Simple as that. The sound with this delete is a thing of beauty. It is an amazing deep growl rather than a scream and it is not too loud for my liking at all. I would completely recommend this. However, I would suggest getting some smaller hangers, for the stock are a tad too big and the exhaust tips could use some sucking up to the car more. Other than that.... 10/10. Also, it was a breeze to put on... Taking stock off was more didficult.
Good Product, Most definitely worth the money
Nic 1 year ago
2013 WRX Sedan. 4 bolts, 4 nuts, 2 gaskets, and 2 pipes... its that simple. said that it would not include "additional hardware", but luckily it came with all the necessary hardware. (an impact wrench makes things so much easier) Overall awesome sound, not too loud, but very "rumbley" and defined
Easy Install and Great Sound
WRXguy24 1 year ago
I ordered and received within a week. Easy 20 min install once you take the stock off. Started up and sounds great. Can be a little loud if you are not used to an aftermarket exhaust but the louder the better for me. Isn't extremely loud where it is obnoxious. Great low tone and rumble.
Nameless Performance Axle Back 2012 WRX
Charles 1 year ago
These gave the car the sound it should have came with out of the factory. Extremely satisfied with this purchase.
Q: Tune? Phrankie 9 days agoAnswer
Will this need a tune after install? 2014 WRX Hatch
A: No you will not.
Tyler A. 8 days ago
Q: Hangers Mrgregory41242 3 months agoAnswer
I am going to purchase this item. I have read most of the reviews one in particular noted to purchase shorter hangers. "However, I would suggest getting some smaller hangers, for the stock are a tad too big and the exhaust tips could use some sucking up to the car more.". Would this be suggested or would this not be a problem she nice there is a little wiggle room with the fitment at the Y pipe?
A: We have not tested the Muffler Delete with a shortened hanger, you could change them out and see the results.
Jared A. 3 months ago
Q: Will this work jamesstatleraz39121 7 months agoAnswer
Will the nameless muffler delete work with the Cobb turbo back system?
A: The nameless products are only a confirmed fit with OEM exhausts. No aftermarket such as Cobb, SPT, Invidia, etc.
Tyler A. 7 months ago
Q: Gaskets/ Hardware Included jkrug 9 months agoAnswer
After reading some of the more recent reviews, people are stating the kit comes with new gaskets and bolts. Can you confirm this? Thanks.
A: Yes it does come with new gaskets and bolts for where it mounts up to the stock y-pipe.
Tyler A. 7 months ago