SET YOUR CAR
FREE SHIPPING
On orders over $100
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

COBB Tuning Post MAF Silicone Hose Black

MODEL # COB712010BK

$75.00


  • Q: Fitment to factory air box?  Trailer Park Ninja2 years ago

    Hello, I currently have a Fuku Works turbo inlet and the factory air box in my '059-2x. The stock post MAF hose is placing a lot of stress on the lid to the factory air box as well the first elbow on the turbo inlet hose. Will this hose properly align with both the turbo inlet hose and the factory air box as well be the correct length? Thank you!
  • Q: tune?  mikenice1134453304 years ago

    if I use this with the cobb sf ram intake will a tune be necessary?
    • 0 of 1 people found the following answer helpful

      A:  Tuning is not necessary for a post MAF hose, but tuning is required for the SF intake.

      Zach G. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: Oem diameter?  subie7194 years ago

    Is this product the same diameter as the Oem hose?
  • Q: Forester xt?  Som3b1kr5 years ago

    can I use this with the SF intake on a 2004 fxt?
  • Q: OD and ID sizes?  nickjh905 years ago

    What are the outside and inside diameters?
    • 0 of 0 people found the following answer helpful

      A:  The inner diameter is 2-3/4 and the outer diameter is 3-3/8.

      Zach G. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  what size tbolts clamps do I need?

      mikewondo
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  A 3.25 clamp should work, but would be a snug fit and a 3.5 would more than likely be too loose.

      Zach G. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: Necessary?  Noosphere85 years ago

    I have a 65mm APS CAI and before I install, I wanted to know if (1) it fits with the 65mm APS CAI and (2) if it is necessary to replace the stock hose? Did some searching on nasioc, but I didn't find a clear answer. Seems like everyone is changing out the hose with an APS CAI install. Thanks!
    • 0 of 0 people found the following answer helpful

      A:  The APS intake works with the stock post maf hose and this will be a direct replacement for the stock hose, so they are compatible together. It is not necessary to change the stock hose, but this will provide smoother airflow to the turbo and is a nice aesthetic upgrade.

      Zach G. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: Use a silicone inlet people!!!!  BoobaRoo6 years ago

    I am having a hard time installing my agency power turbo inlet pipe, I decided to go with the hard pipe inlet instead of a silicone inlet because i did not want any pressure collapse but at this point I believe I made a mistake. I highly reccomend a silicone inlet prefferably the (tomei, great price/product) at this point because to be frank its a pain in the buns fellas. I had my manifold removed and there is still fitment issues, Houdini him self could not make the 2.4 to 3 inlet to turbo coupler fit while keeping alignment. Not to mention the stock fuel system is not playing nice. My question now that I am in this predicament is will this fit my agency power turbo inlet? The AVO coupler failed me miserably and is on the firts plane outta here?
    • 0 of 0 people found the following answer helpful

      A:  We do not carry Agency Power so I cannot confirm, but if your inlet is an OEM replacement and uses the stock post MAF hose this hose should fit without a problem.

      Nick S. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: turbo xs short ram intake and Tomei Silicone Turbo Inlet Hose  Ryan O6 years ago

    will this post maf hose have fitment issue if ran with these products aswells
    • 0 of 1 people found the following answer helpful

      A:  There should be no fitment issues with the TXS intake and Tomei inlet because those parts are both designed to work with the stock post maf hose and this piece will be a direct replacement for that hose.

      Zach G. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: use with amr inlet  racer9999644387 years ago

    Is this big enoungh to use with the amr hard inlet?
    • 0 of 1 people found the following answer helpful

      A:  It will be a tight fit as the AMR inlet is a larger OD then the stock unit. However with a little massaging standard post MAF hoses can be made to fit.

      Kirill C. @ RallySport Direct 7 years ago  
        
      Was this answer helpful?