Back Sign In

SET YOUR CAR

Shop By Category --->

Engine

Suspension

Set Your Car

Product images

Product Media

Raceseng CasCam Camber Plates w/ Sping Perch For KW/ST/RCE - Scion FR-S 2013-2016 / Subaru BRZ 2013+ / Toyota 86 2017+

Suspension
Suspension Height Adjustment
Top Hats >Raceseng CasCam Camber Plates w/ Sping Perch For KW/ST/RCE - Scion FR-S 2013-2016 / Subaru BRZ 2013+ / Toyota 86 2017+

Raceseng CasCam Camber Plates w/ Sping Perch For KW/ST/RCE

Scion FR-S 2013-2016 / Subaru BRZ 2013+ / Toyota 86 2017+

Product Resources

Fitment Details

Features & Product Details

RallySport Direct proudly carries a great selection of quality automotive enhancements by Raceseng to improve the ergonomics, aesthetics, and overall driving experience of your vehicle.

On this page, you are looking at the Raceseng CasCam Caster and Camber Plates. These are currently the only top hat available on the market with under-mount caster and camber plates that offer independently adjustable caster and/or camber that come with custom spring perches.

Here are the details:

The custom spring perches feature a sealed angular contact radial bearing that removes rotational loads from being transmitted to the spherical bearing that results in smoother steering response.

Camber can be adjusted by loosening the 4 bolts holding the bearing housing in place, then you can slide the bearing housing to achieve desired positive or negative camber.

CasCam is capable of getting -4.5° of negative camber gain and +1° of positive camber. This is also dependent on current suspension or coilover setups.

Caster can be adjusted by lifting the front of the vehicle and loosening the 3 bolts on the strut tower that hold the plate in place. Starting at 0° or all the way forward, you can slide the plate backward to add positive caster.

CasCam is capable of getting an additional 1° of positive caster gain which would yield a total of 7° of positive caster.

CasCam is the only under-mount style plate that allows for separate adjustment of both caster and camber. This design will allow for virtually any top-mount strut tower to be used.

Minimal stack height design allows for maximum suspension travel and increased strength.

Customizable to any coilover.

Shock nut and spring perch bushing are machined from stainless steel.

The structural elements of the CasCam are CNC machined from billet aluminum to remain lightweight without sacrificing strength.

The T-nuts are CNC machined from 303 stainless steel alloys.

The camber slot washers are laser cut and brush finished from 304 stainless steel.

All socket head cap screws are 18-8 stainless steel for corrosion resistance.

Front location.

NOTE - Included is the shock nut, shock bushing and spring perch for KW V1/V3/Clubsport / ST Suspension / RCE Tarmac and Fortune Auto Coilovers. These will not work with OEM springs as configured.