RallySport Direct carries a great selection of quality performance valvetrain upgrades brought to you by GSC Power Division.
Here, you are looking at the GSC Power Division +1mm Stainless Steel Exhaust Valve Set. These exhaust valves have been designed using advanced 3D design simulation programs to create a stronger and higher flowing valve head.
+1mm in size
Swirl polished heads for smoother airflow over the valve
Back cut to reduce valve weight for higher rpm, higher boost pressure and allow for more aggressive cam profiles without increasing valve spring seat pressures
Valve stems are micro-polished to allow for less oil retention on the stem which creates less drag on the stem to guide for a smoother motion.
Intake valves are a modified 21-4n stainless and Exhausts are a modified 23-8n stainless material for high heat capacity while maintaining longevity.
Valve tips are either hardened or have a stelite wafer tip fused so that the tip is within 5 Rockwell C of the rocker or valve tappet for extended life and less wear
Valve tip lengths. They have taken extra time to adjust tip heights on the applications to require less tipping of the valve to maintain proper tip height for proper valvetrain geometry and to cut down on install times when setting valve lash
They have also adjusted the Keeper grove to properly balance intake and exhaust spring pressures to reduce the use of valve spring shims and maximize performance from their spring and retainer kits
Valves will work with an OEM keeper/lock or when available for their upgraded keeper/lock. It's not mandatory but it is suggested that any valve lock not be reused on performance applications due to material grooving
Sold as a complete set of exhaust valves