Back Sign In

SET YOUR CAR

Shop By Category --->

Engine

Suspension

Set Your Car

Product images

Product Media

Engine
Oil Systems
Catch Cans >Radium Catch Can Kit PCV Fluid Lock - Scion FR-S 2013-2016 / Subaru BRZ 2013-2020 / Toyota 86 2017-2020

Radium Catch Can Kit PCV Fluid Lock

Scion FR-S 2013-2016 / Subaru BRZ 2013-2020 / Toyota 86 2017-2020

Product Resources

Fitment Details

Features & Product Details

RallySport Direct carries highly engineered products designed to improve the performance and longevity of your vehicle brought to you by Radium Engineering.

This is the Radium Engineering PCV-Side Fluid Lock Catch Can Kit. Catch can kits are essential to Subaru platforms to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excessive oil-saturated air circulating back into the air intake stream can lead to degraded performance. The Radium Engineering catch can kit features large 10AN ORB ports, a 4AN ORB drain port, a 2-step oil separation baffling, and an O-ring sealed dipstick.

SPECS:

Designed to fit on the right-side of the engine bay

Less oil consumption effectively raises the octane levels

Cleaner air increases engine performance

Prevents sludge buildup in the intake

Lowers hydrocarbon emissions

Capacity: 7 fluid ounces

Height Without Fittings: 5 inches

Outside Diameter: 2.45 inches

PLATFORM SPECIFICS:

Strategically located for compatibility with right-hand drive and left-hand drive vehicles

Some brake line clearances are necessary for RHD installation

These kits are also compatible with aftermarket forced induction kits

For mounting, the kits use factory bosses and holes in the vehicle so no cutting, drilling, or permanent modifications are needed to the vehicle

This kit does not vent into the atmosphere making this kit emissions and track legal

Closed loop systems route clean filtered air back in through the engine to be burned and to promote negative crankcase pressure for optimal performance

Closed systems prevent unwanted oil vapors into the cabin

This catch can kit runs in line with the 3/8" PCV valve

When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV "check" valve closes to experience no flow

The PCV hose will experience "metered" vacuum when the engine is idling, steady-state cruising, and decelerating