RallySport

RallySport

Garage

Reviews

RallySport has reviewed 218 Product(s).



    RSD Customer 6 years ago
    I purchased this with the red collar and even the dealership techs were commenting how classy it looks. :)
    COBB Tuning Delrin Shift Knob Blue


    RSD Customer 6 years ago
    Very nice product!! Install took several hours the ductwork fits a little too tight in some areas and rub a little. Factory front fascia has to be modified quite a bit for a secure fit. Overall noticed very little lag increase but top end picked up a good amount over TMIC and factory tune.
    TurboXS Front Mount Intercooler


    RSD Customer 6 years ago
    totaly got rid of the the cluck for good. on up shifts and hard down shift way more plant well spent money!
    Kartboy Rear Diff Crossmember Bushings Standard Set


    RSD Customer 6 years ago
    Great product clearance is a little tight with strut bars I recommend getting a whiteline big tmic one other than that it's never given me problems hit 410whp with this meth and a 20g virtually no lag.
    APS Top Mount Intercooler


    RSD Customer 7 years ago
    I knew going into it that this exhaust does have a tight fit to the bumper cowl but a little heat tape solves that problem. The one negative is covered now the positives: *Amazing exhaust note.. has a very old school sound to it like a WW2 fighter bomber under WOT. *$543? Yep. One of the most inexpensive exhausts out there for the 08 STi. *Build quality is quite nice. I would venture to say the welds are nicer than the HKS I had on prior. *One of the lightest exhausts for the 08 STi and 3" all the way back. Pleasure doing business with Kirill as usual. Here's my car in action w/ the exhaust: http://www.youtube.com/watch?v=P0BCAW7wAfI
    Invidia N1 Cat Back Exhaust Titanium Tip


    RSD Customer 7 years ago
    Worked great with a Grimmspeed 3" DP and OEM midpipe on my '06 USDM STI. It let me make the Stage 2 upgrade and keep my JDM Genome axleback.
    Elite AWD Factory Donut Gasket Adapter


    7 years ago
    Very comfortable nice drop "fair" handling.. great for a spirited daily driver but not stiff enough for a track car. Been using them for 30K miles now no issues whatsoever on the stock struts.


    RSD Customer 7 years ago
    Helps get rid of the spongy feeling in the shifter. I did a short-throw at the same time and loved the results.
    Kartboy Shifter Bushings


    RSD Customer 7 years ago
    This really helps tighten up the drive train. There was no noticeable noise/vibration/harshness increase. This did eliminate the "Clunk" from the rear end when shifting aggressively. After a few months I installed the engine mounts and noticed another notable reduction of drive train slop. Next up is the pitch mount.
    STI Transmission Mount


    RSD Customer 7 years ago
    Good stopping power. MISERABLE brake dust. Dustiest pad I've ever owned or even seen. They require so much extra wheel and fender cleaning that I'm replacing them with _50% life left.
    Axxis Ultimates Front Brake Pads


    RSD Customer 7 years ago
    Good stopping power. MISERABLE brake dust. Dustiest pad I've ever owned or even seen. They require so much extra wheel and fender cleaning that I'm replacing them with _50% life left.
    Axxis Ultimates Subaru WRX Rear Brake Pads 04-05


    RSD Customer 7 years ago
    This is the fourth CBE I've used and definately the loudest. Great for those that wanna stand out and get noticed by the police. System is also rusting on the muffler and hangers. I should've bought another Apexi CBE.
    Invidia Racing Series Cat Back Exhaust


    RSD Customer 7 years ago
    These are the ultimate street pads for your car. They perform like a race pad but they work under street conditions. I have an 02 WRX with DBA slotted & drilled 1 piece rotors and HP+ pads and SS lines. I also own a stock 07 STi and in my opinion the WRX stops better than the STi no joke. They are noisy and very dusty and they will eat at your rotors a bit but they work flawlessly at all times.
    Hawk HP Plus Front Brake Pads


    RSD Customer 7 years ago
    AVO will leave you Breathless..! I went with a AVO Turbo back exhaust w/ hi-flow cat and could not be happier.. over-joyed.... I need a towel! I have had 5 Subaru's all with your current favorite exhaust setup but.....this setup brings Sweetest Subaru exhaust notes I ever heard. PERFECT quality sound at idle or WOT. I love the fact that AVO products like this have more hands on work rather than a huge production line. A++++ worth every dime!
    AVO Subaru WRX STi Cat Back Exhaust 02-07


    RSD Customer 7 years ago
    I just got done putting this on a buddies car seen it on you tube all I have to say is you tube does not even come close to what it really sounds like. I have put the APS 3.5" on another one. This is by far the best one I have seen in a long time. I am getting one here real soon. Bolt on was very easy even with just some ramps. I would tell anyone to get this if they want power and to turn some people's heads.
    Tanabe Concept G Blue Turboback Exhaust


    RSD Customer 7 years ago
    Excellent clutch line! Easy install and a huge difference over the OEM Clutch line. More refined feel. Great quality and great buy.
    Subaru STI Clutch Line


    RSD Customer 7 years ago
    My tuner threw this into my setup last minute since I forgot to purchase one in advance.....glad they did cause this thing works wonderfully!! My tuner used it to adjust the boost level of my 16G to 18psi and I ended up gaining +90whp/ft tq over stock!!!!! :0)
    Turbosmart Boost Tee Boost Controller


    RSD Customer 7 years ago
    TXS makes great products that fit without a fuss. This TBE is no different it installed in my 05 4eat wrx without a problem and came with all the necessary hardware. The reason why I did not give it a perfect score is becuase it runs a bit hot with my Deadbolt 16G setup.......I am hoping that upgrading my wrx scoop to a bigger 04-05 STi scoop will help get more air over it thus bringing down the temps a bit.
    TurboXS Top Mount Intercooler


    RSD Customer 7 years ago
    The TXS uppipe was a prefect fit for my 05 4eat! Mine came with all the necessary hardware so it was a great buy. A little advice if I may try to get the uppipe (this or another you end up purchasing) ceramic coated since uppipes are installed inches away from the engine and the coating will help stop those "super heated" exhaust gases from increasing the temps on one side of the engine.
    TurboXS Uppipe with EGT Bung


    RSD Customer 7 years ago
    Great product for a great price! Matches up perfectly with 16G and 18G turbos....or any other turbo setup that gets you up to 315whp (anything more you and you may want to get bigger injectors).
    DeatschWerks Top Feed 650cc Fuel Injectors


    RSD Customer 7 years ago
    great product. it fit perfect in my invidia divorced downpipe now I have speed with out the loud noise from my catback exhaust system.
    Elite AWD Factory Donut Gasket Adapter


    RSD Customer 7 years ago
    Awesome downpipe can really hear the turbo spool up and a lot quicker spool up time. Definately recommend this downpipe to anyone great price great product!
    Invidia V2 Downpipe Bellmouth


    RSD Customer 7 years ago
    Timer Is Great But Install Instructions Not Very Helpful No My06 Info And Couldnt Find It On Any Boards
    HKS Type-1 Black Turbo Timer Blue Back Light


    RSD Customer 7 years ago
    Fantastic better than I thought and wish I did it sooner. Just take your time to get used to it and you'll love it. Only problem need further instructions for any finite adjustments. Followed all instructions but doesn't seem like the shifter sets 'deep' enough into first gear position and on three occassions had the shifter pop out of first on me. Otherwise WOW! Jeff
    Billet Products Pontiac GTO 6-Speed Billet Pro Series Short Shifter


    RSD Customer 7 years ago
    I was really impressed with these injectors. Reasonably priced for the performance and testing that have been put into these injectors
    DeatschWerks Side Feed 850cc Fuel Injectors


    RSD Customer 7 years ago
    great bang for the buck however to get the fit just right some trimming of the hoses is needed (thicker radiator core) i found that slight trimming of the lower left fan shroud also necessary as it interferes with the lower hose and hose clamp- trim 1/4" off of it and it'll fit great.
    Mishimoto Performance Aluminum Radiator Manual Transmission


    RSD Customer 7 years ago
    This piece of the kit looks great and I am sure I will not be disappointed when it is fitted to my car.
    Beatrush Forged Pitching Stopper Mount


    RSD Customer 7 years ago
    Minimized some engine shake pluse it looks 100 times better then the plastic OEM one. A definite must for anyone with a Front Mount Intercooler.
    Beatrush Forged Pitching Stopper Mount


    RSD Customer 7 years ago
    fitment is pretty tight when using the 3in. turbo inlet. Other than that I am very pleased with this product.
    APS Subaru WRX / STI Turbo Inlet Hose 02-07


    RSD Customer 7 years ago
    Love them. They give the car such a aggressive look. Sturdy made and very durable. Install was a breeze...
    Rally Armor UR Mudflaps Black Urethane Blue Logo


    RSD Customer 7 years ago
    Perfect fit. Love it easy install.. Not much more to say other than this is the only way to get around having any exhaust leaks. This is a perfect fit for the dount gasket.
    Elite AWD Factory Donut Gasket Adapter


    RSD Customer 7 years ago
    I was blown away by how much this effected the car. First off yes. It makes your drivetrain feel much more connected to the car. It's so much more than that though. When you hit a bump the force will go through the car much more quickly instead of shaking your drivetrain around for a second or two. Engaging each gear is far smoother as well as the drivetrain does not squirm under the torque (I have an upgraded STi). The "Subaru thud" is removed. I had it so loud that when I passed other cars they would tell me later that it sounded like something broke. This improved the handling feel of the car as well. Any kind of bumpy road used to be a shaky rollercoaster ride. Now the force is translated much more directly. It's like sharper harder bursts but in between the car feels locked to the road and smooth. This part is stiff and not for everyone but the improvement is staggering.
    Turn In Concepts Rear Diff Mount Bushings Race


    RSD Customer 7 years ago
    Great product. They have stages for you already. Detailed instructions on what maps to use for your specific setup. Advanced setup? Tuners can use it to save and build maps for you when you take it in to get tuned with the Pro Tune feature. With performance modes which you can most definitly feel there is also a fuel economy mode which helps keep the boost low to save on fuel.
    COBB Tuning AccessPORT w/ Proto Tuning Tool Holder


    RSD Customer 7 years ago
    Performance performance performance! You can't go wrong with these coilovers. I've had them on my 06 STI now for about two months and they are unbelieveable. These aren't luxury coilovers so they won't smooth out the ride any but you'll never lose grip. Feels like riding on rails. The amount of adjustability is amazing. Follow the recommended hieght settings near -2" front and back withotu any bottoming out. Easy to install I would highly recommend getting an alignment done after though. I had extremely high negative camber due to the lowering of the vehicle.
    Tein Flex Coilovers


    RSD Customer 7 years ago
    Theses greatly helped inital turn in and the car seems to track a little better on exiting a corner.
    GTSpec Fender Reinforcement Brace


    RSD Customer 7 years ago
    This seat fits great into my RS. However I found the middle section of the seat a bit too wide and I find myself sliding around more than I hoped. I'm 6"1' and 200 LBS. Overall great looking seat.
    Sparco Chrono Road Seat Black Tuning


    RSD Customer 7 years ago
    The best bov ive ever used. The performance exceeded my expectations. Other bov's that i have tried made my idle irratic and caused my check engine light to come on. With this bov my idle is smooth and the shifting has improved no more lag between shifts. If your lookin for performance this one is for you. If your lookin for the loudest sound you will not want this bov.
    APS Blow Off Valve for Top Mount Intercoolers


    RSD Customer 7 years ago
    Installed this with group N xmission and engine mounts. The cars shifting improved but even better is the steering for some reason is much improved.
    Kartboy Rear Shifter Bushing


    RSD Customer 7 years ago
    Solid and Light. Everything you need from a pitchstop. Forged construction actually makes it LIGHTER then stock. Pretty big increase in noise transmitted into the cabin. Keeps the engine from rocking. Improved throttle response and shift feel because of the lack of engine movement. I recommend this product for anyone looking for a pitchstop.
    Beatrush Forged Pitching Stopper Mount


    RSD Customer 7 years ago
    This shifter is GREAT. I'm past the 100 mile break in and it shifts like a charm. There is no way you can miss 2nd to 3rd shifts. I ordered a threaded handle for a member on LS1GTO.com and that just made it so much better. All in all this shifter is a great choice I debated between this and the GMM and it all came down to how many bad reveiws I could find and I didn't find the first on this shifter A+++++
    Billet Products Pontiac GTO 6-Speed Billet Pro Series Short Shifter


    RSD Customer 7 years ago
    Best mod I have done in a long time!! Engine response is much better! Every subaru needs one of these.
    Beatrush Forged Pitching Stopper Mount


    RSD Customer 7 years ago
    Nice and easy install that added a great feel to the shifter. Excellent modification and worth the few bucks.
    Kartboy Shifter Bushings


    RSD Customer 7 years ago
    good upgrade easily installed done in 15 minutes and definatly worth the money.
    Kartboy Rear Shifter Bushing


    RSD Customer 7 years ago
    Great quality product and good fitment. Be sure not to put the sticker on before you install or it may come out crooked.
    Kartboy Short Throw Shifter


    RSD Customer 7 years ago
    I was so entertained by Ms. Galen's review that I had to check out this item for myself. The build quality is excellent though there was quite a large amount of machining dust still present in the pipes and it took almost a chimney brush to clean it out... Be sure that you have a car pit or lift when you try and snake the up-pipe section through the smallish gap between the engine and the frame mount otherwise you'll be in a world of pain if using simple jacks. The equal-lenght design really smoothes the exhaust tone a lot from idle to the redline; the pitch is higher and sounds racier. In short you won't sound like a pissed off turbocharged lawnmowing tractor no more. Finally I noticed that the engine revs more freely and the turbo spool-up was improved even on the STi. A good choice if you got the dough.
    Invidia Equal Length Exhaust Manifold


    RSD Customer 7 years ago
    Gasket has been on the car for a few months now and it's working just fine. My STi is flashed for "Stage 2" with a Cobb AP2 and this gasket sits between an Invidia downpipe (with high-flow cat) and a custom cat-back. The gasket has held up just fine to all of this.
    Subaru OEM Turbo to Downpipe Gasket


    RSD Customer 7 years ago
    Installed this exhaust in 45 minutes very simple install and gives you an idea of the number of bends that this exhaust deletes compared to the stock cat back. On inspection of this exhaust you really appreciate the robotic TIG welds that are VERY clean as well as the nice drop in weight you will get from installing this piece. The sound can be described as a very deep boxer roar that is on the louuud side which I love. Video after install: http://www.youtube.com/watch?v=ONzpFc1-MBw&eurl
    Invidia Racing Series Cat Back Exhaust


    RSD Customer 7 years ago
    Great price and good quality. And I love the look of it definitely a great product.
    Tein Front Strut Tower Bar


    RSD Customer 7 years ago
    I needed this for my Invidia V3 DP worked great. Dont think using the factory gasket will be fine... it will not work. The stock gasket will be far too burnt. This is such a simple thing that many people forget. Just get one if you are doing a DP. Its worth the extra $$
    Subaru OEM Turbo to Downpipe Gasket


    RSD Customer 7 years ago
    I got this DP for my 06 WRX and have been so pleased with it. The extra sound from the turbo is outstanding not to mention the power gains I have yielded with my COBB access port. Definitely would buy again. . . my only sugguestion would be that if you do buy a DP buy a COBB AP or some sort of engine management unless you want to ruin your car. . . Sadly I have seen people sun DP's without a tune . . just a bad move
    Invidia V3 Downpipe Divorced Wastegate


    RSD Customer 7 years ago
    It was a necessary part for my install - it was exactly what I needed and fit perfectly.
    Subaru OEM Turbo to Downpipe Gasket


    RSD Customer 7 years ago
    My Stock HS was rubbing and broke through a turbo oil line. After modifing it into a metal monstrosity and slicing open my hand in the process this was much better and well priced.
    COBB Tuning Turbo Heatshield


    RSD Customer 7 years ago
    They're Rally Armour. They're Mud Flaps They're Awesome. Poly all the way for winter and durability. I recomend having a angle screwdriver for the install so you don't have to take off your rear wheels -_ 04-05 STi
    Rally Armor UR Mudflaps Black Urethane Grey Logo


    RSD Customer 7 years ago
    Although uninstalled at this time I'm super stoked to use this specific gasket. I said to myself the other day that only this gasket would do. and that made me happy just like this gasket does. 4/5
    Subaru OEM Turbo to Downpipe Gasket


    RSD Customer 7 years ago
    Using along with Hawk DTC 60's and DBA front discs. Linear strong brake feel. Great initial bite.
    ATE Super Blue Brake Fluid Dot 4 1L


    RSD Customer 7 years ago
    This should be the first mod for anyone interested in getting the best out of you car. By far the most noticeable mod i put on my wrx. Horsepower gains that you can feel not just see on a dyno. I have a shortram cold air and a catless turboback and untill i added the accessport with stage 2 my vehicle wasn't running right. This took care of my check engine lights and I am geeting noticeably better fuel mileage. Best purchase for my vehicle I made. Would recomend the cobb accessport to anyone. Very easy to install and RSD tech support was the best. Thanks rallysport direct
    COBB Tuning AccessPORT w/ Proto Tuning Tool Holder


    RSD Customer 7 years ago
    It fits good. Adds a lot of power to STI. I had to remove the stock heat shield. I currently do not have a heat shiled I am somewhat concerend that this may casue heat to soak into my intercooler.
    Invidia Downpipe Divorced Wastegate


    RSD Customer 7 years ago
    Downpipe sounds amazing with my hks hi power. Definately worth the money. You get that nice turbo whistle now from the exhaust when in the throttle. And the power i made with my other parts were more than enough for my needs.
    Invidia V3 Downpipe Divorced Wastegate


    RSD Customer 7 years ago
    This bleeder is awesome! Made bleeding my brakes super easy!
    Motive Products Import Power Bleeder Kit


    RSD Customer 7 years ago
    Easy install with if you can find the PINOUTs of your vehicle. Just tap in. Make sure you calibrate it once you install it... not like i forgot to and thought I was knocking like crazy... I also wish it came in flat black.
    TurboXS KnockLite Knock Indicator


    RSD Customer 7 years ago
    Can't say yet haven't installed it and it wont' let me skip to the next review. Waiting to weld on new wideband sensor bung which it doesn't come with. And of course I see a used cobb for sale for cheaper than this the next day... _sigh_
    Invidia V2 Downpipe Bellmouth


    RSD Customer 7 years ago
    This is a recommended must have for your FXT! I am currently running Stage1 and it is a proper map for the car. Even safe to say this is how the car should have come from Subaru. Not only does power delivery feel more solid but every day driving has improved. I waited nearly a year for Cobb to release it for the 07+ FXT and it was definitely worth the wait. Only trouble I had was after flashing the ECU the car would not turn over on the first attempt. Fired right up the 2nd time and has been happy every since.
    COBB Tuning AccessPORT w/ Proto Tuning Tool Holder


    RSD Customer 7 years ago
    I purchased an invidia V3 downpipe for my 06 wrx and needed to either cut my old heat shield or buy a new one. . . . and I am very happy with my choice. Really cleans up the engine bay and works great. I had a small rattle due to a piece of metal that got bent but I fixed it.
    COBB Tuning Turbo Heatshield


    RSD Customer 7 years ago
    2002 WRX Wagon w/ hitch Exhaust tip clears hitch by about 1cm. Polished SS really looks good. I have a Rotary 2-post asm. lift and it took me less than 10 minutes to install once I lifted it. Hanger supports are easy to mount. SOUNDS GREAT (outside) and nice and quiet in the cabin at idle and cruising good deep tone when accelerating. I chose this system because it has the best noise/power-increase ratio and is SS so it should last a bit.
    COBB Tuning Cat Back Exhaust Stainless Steel


    RSD Customer 7 years ago
    Excellent exhaust. Not too loud but definitely gives you a satisfying boxer rumble. Easy 30 minute install with ramps and proper tools. Also looks beautiful shining out from your bumper. I think it even gave me a little bit better gas-mileage? Love Cobb and this exhaust.
    COBB Tuning Cat Back Exhaust Stainless Steel


    RSD Customer 7 years ago
    Love this BOV! Easy install! Very freaking LOUD. No one and I mean no one is going to miss you with this BOV! It looks great in the engine bay aswell!
    TurboXS Universal RFL Blow Off Valve


    RSD Customer 7 years ago
    The heat shield performs it's job flawlessly and really looks great! It was slightly difficult to install but then again I left the bumper attached to the car when I did it. I would recomend pre-drilling the holes in the heat shield. Then use the heat shield as a template on the car and pre-drill the bumper. Then remove the bumper and attach the heat shield. Then ofcourse re-install the bumper. Well worth the time. My bumper had started to melt due to my invidia exhaust. Once I installed this the melting stopped and thus far there has been no damage to the heat shield. The exhasut was installed the 25th of April '08 and the heat shield was installed the 6th of May '08.
    Carbign Craft Carbon Fiber Heat Shield


    RSD Customer 7 years ago
    This is one H*LL of an Exhasut!! I've had it on my WRX since April of '08 and it is LOUD and PROUD everyone who hears it loves the way it sounds!! It really brings out the Boxer Engine! The only difficult part about the install was removing the old rust bolts from the stock exhaust. A truly fantastic product!! Since I've gotten this cat-back it's been an easy choice on what brand I should buy for the rest of my exhaust Invidia!
    Invidia Racing Series Cat Back Exhaust


    RSD Customer 7 years ago
    Bushing does increase firmness and feel but does leave you wanting a little more. This is the only shifter/ linkage upgrade i have done so far so with further upgrade ill be sure to find the right setup. I would buy it again without thinking twice. **Intall tip - use a razor to cut one of the lips of the oem bushing then use a chanel lock to push it out.
    Cusco Shifter Bushings Subaru 5 Speed


    RSD Customer 7 years ago
    Very simple install looks fantastic compared to the stock heat shield.
    COBB Tuning Turbo Heatshield


    RSD Customer 7 years ago
    Caution to you that own an 07 STI. You will need to change vacuum line on turbo to a 04-06 style. Subaru changed them in 07. I'm getting the check engine light on around 5000 rpm. Check out the Cobb websight for more info and part #s
    APS Subaru 3.5" Race Turboback Exhaust 02-07 WRX & STI


    RSD Customer 7 years ago
    this is a great exhaust. not only are the welds super clean but the flanges are the best i've ever seen. it sounds great looks great and it was super easy to install by myself only took about an hour. like most 3" exhausts it does not bolt to a stock DP so i had a slight problem with a leak. all i did was loosen the bolts and push the pipe up a bit tighten back up and no more leak. i highly recommend this to all you 08/09 chassis owners. money well spent.
    Invidia N1 Cat Back Exhaust


    RSD Customer 8 years ago
    great deal. turbo definately spools alot louder and i paired this with the invidia n1 catback and it sounds just wicked. kind of a pain to install but any downpipe will be if your bolts are rusty. recommended
    Invidia V3 Downpipe Divorced Wastegate


    RSD Customer 8 years ago
    im extremely pleased with this catback which i paired up with the invidia divorced downpipe. the sound is awesome and there is some increased cabin noise but well worth the exchange. the angled exit also sets this catback off nicely from others. i recommend this 100% install of the catback was a piece of cake its the downpipe removal that can be tedious
    Invidia N1 Cat Back Exhaust


    RSD Customer 8 years ago
    Sounds amazing! Exhaust will definately turn heads of bystanders. Silencer brings noise down to stock levels however throttle does feel a little hesitant with it on. Power increase is definately present although very minute. Car responds a lot cleaner than usual with exhaust on. Noise levels inside cabin is bearable depending on the person. Please take note this exhaust is loud! I recommend buying a generic 3" gasket from rsd to help with any possible leaks you may find. I have not tried mating this exhaust to the stock downpipe although i heard it does not mate up well. Buy the invidia downpipe along with this and you will have no problems.
    Invidia N1 Cat Back Exhaust


    RSD Customer 8 years ago
    Mated up perfectly to my cat-back and completely changed my engine. After a re-tune due to the rich running conditions my engine finally felt free.
    Invidia V3 Downpipe Divorced Wastegate


    RSD Customer 8 years ago
    This is one of the best sounding bov's they make & installation isnt bad if you buy the full kit. BUT you will have problems at low idle & boost you'll have to rev the motor more than usual to keep your motor from shutting off. It's almost sounds like you cant drive somewhat embarrasing but once you get used to it or fix it its badass!! Hope this helps someone make a choice.
    HKS Subaru WRX / STI Super SQV Blow off Valve 05-06


    RSD Customer 8 years ago
    I've had this exhaust for about a year or so now. I love the sound its a great exhaust. It gave a considerable amount of horsepower for an exhaust. Make sure you have a tune or Accessport already or close in mind because this will obviously get rid of your cat. Also not the best exhaust if you plan on driving rally-x. (I didn't until it was already on) Overall the time it took to install was about 4 hours and that was in a shop..Probably just me though.
    Tanabe Concept G Blue Turboback Exhaust


    RSD Customer 8 years ago
    I think this is the top of the line bov if your looking for alot of sound this isn't for you. This bov is designed for the perfect sound which sounds so professonal.
    APS Blow Off Valve for Top Mount Intercoolers


    RSD Customer 8 years ago
    was as said but doesnt come with a diagram so kinda confusing but quality product
    Samco Ancillary Hose Kit 9-Piece Red


    RSD Customer 8 years ago
    beautiful craftsmanship the install was a snap and really brings together the engine bay. A must have with a fat downpipe!
    COBB Tuning Turbo Heatshield


    RSD Customer 8 years ago
    When I first bought this product I was amazed by the Amount that i was going to save. When I got it in the Tech i was going to have put it in told me that it would not fit to a stock system and I would need a new mid pipe In order for the part to fit. So I plan to have a machine shop fix that as well as put a cat on it for emissions sake. If i had known this i wouldnt have bought it in the first place.
    Invidia Downpipe Divorced Wastegate


    RSD Customer 8 years ago
    For all new customers this site has excellent customer service with quick responses to questions regarding orders and concerns. Thumbs up guys you are doing a great job and I look forward to doing more business in the future.
    Autopower Bolt In Roll Cage for Subaru WRX 02+ 83805


    RSD Customer 8 years ago
    Mates up fine but be aware of leaks when mating to stock or spt catbacks. Turbo heatshield needs to be cut to fit or replaced with a cobb or spt heatshield. If not your intercooler will be one nice barbeque grill!!! Other than that gives a nice sound. allows you to hear that whistling turbo comming through the exhaust.
    Invidia Downpipe Catted Divorced Wastegate


    RSD Customer 8 years ago
    This made my rear bumper look real good especially cuz my car is white and i have other carbon fiber parts. Extremely easy to put on.
    Carbign Craft Carbon Fiber License Plate Frame


    RSD Customer 8 years ago
    These mudflaps look awesome on my 07 sti very easy to install.
    Rally Armor UR Mudflaps Black Urethane Red Logo


    RSD Customer 8 years ago
    Dont let a blown radiator hose leave your stranded (like what happened to me) or overheat your system potentially warping your heads! SAMCO never disapoints - with the best hoses on the market these will last as long as your car. i highly recommend SAMCO's Sport Clip Kits - hose clamps with rounded edges and smooth inner walls that wont slice or pinch your silicone hoses. RALLYSPORT why dont you carry these!?
    Samco Radiator Hose Kit Blue


    RSD Customer 8 years ago
    Yet again! SAMCO never disapoints - with the best hoses on the market i highly recommend SAMCO's Sport Clip Kits - hose clamps with rounded edges and smooth inner walls that wont slice or pinch your silicone hoses. RALLYSPORT why dont you carry these!?
    Samco 4-Piece Intercooler Hose Kit Blue


    RSD Customer 8 years ago
    another good piece. just not as gold colored as i had imagined. the stock photos show the part as looking very "gold" in color.. in reality it is more of a silver aluminum with a slight hint of gold finish on it
    Beatrush Radiator Cooling Panel


    RSD Customer 8 years ago
    A nice piece for sure.. however the gold finish is much lighter than in the stock photos.. when i first got it i though it was silver! only to find it has a very very light gold finish compared to the other gold bits in my engine.
    Beatrush Pulley Cover


    RSD Customer 8 years ago
    awesome shift knob! looks great feels great shifts great! shipped to me very quick! Its a great knob at a great price!
    Greddy Ball Type Shift Knob Aluminum 5MT


    RSD Customer 8 years ago
    This BOV is really nice Looks Good Sounds Great. Moderately quiet with the stock air box but noticeable. Very noticeable with a short ram intake even in the car with the windows up and radio on.
    TurboXS Hybrid Blow Off Valve


    RSD Customer 8 years ago
    I've been rocking these rotors for more than 6 months now. Even after the occasional AutoX Drag race and everyday driving these rotors still feel just as good as the day I installed them. I recommend these rotors to any one who wants a fairly cheap upgrade that really pays for itself.
    Stoptech Drilled Rotor Single Front Left


    RSD Customer 8 years ago
    these are much shorter than oem endlinks... i assume for lowered cars.
    Kartboy Rear Endlinks


    RSD Customer 8 years ago
    looks great.great quality.easy installonly three bolts.
    COBB Tuning Turbo Heatshield


    RSD Customer 8 years ago
    good fitment and matching.tight fitment for gauges.needs caps for screws or something because they show when installed.
    Autometer Center Gauge Pod 52mm


    RSD Customer 8 years ago
    Very comfortable. Sporty look and the blue goes well with the metal and any interior colors. Surprised to see the option of using the P sticker or the 6spd stickers. Nice to have the option. Only complaint is that its really cold in the winter. I expect the opposite to happen during summer. Small price to pay for comfort and style. Worth the money easily.
    Prodrive Gear Knob Silver 6MT


    RSD Customer 8 years ago
    Very easy to install with ramps and a little light. Really improves the feel of the shifter and tightens up the linkage. Did the TiC pivot bushing and KB rear bushing after these. The front shifter bushings made the biggest difference out of the three.
    Kartboy Shifter Bushings


    RSD Customer 8 years ago
    way better than the stock 06 wrx kind of stiff from stock street act fly wheel good combo with this cluch
    ACT Heavy Duty Performance Street Disc Clutch Kit


    RSD Customer 8 years ago
    Perfect for a modest drop on my 03 Wagon that is a daily commuter. Yes a little more harsh than stock but well worth it.
    Prodrive WRX 2002-2003 Spring Kit Impreza WRX/GX 2001-2002


    RSD Customer 8 years ago
    Great fitment only took 2 hours to take off stock exhaust and install new exhause in garage w/ jack stands. Good sound high quality welds. The only thing I didn't like were the stamped flanges although they are made to be light they are a bit combersome when it comes time to tighten them (A 1/4 drive rachet w/ a 14mm deepwell socket worked the best). CEL came on in about 4 days after install. Overall great exhaust I would buy it again.
    Tanabe Concept G Blue Turboback Exhaust


    RSD Customer 8 years ago
    Perfect and flawless. If you don't have this buy it because it makes bleeding brakes a breeze. And not to mention changing your brake fluid. Even easier! BUY IT!
    Motive Products Import Power Bleeder Kit


    RSD Customer 8 years ago
    VERY BA blow off valve. it is simple to install (30 min for complete idiot). installed it on my 2007 sti. took three adjustment washers to seat the valve fast enough.
    TurboXS Universal RFL Blow Off Valve


    RSD Customer 8 years ago
    there amazing and don't fault under 108 octane but subaru needs to make a top feed system i had to remove the entire intake manifold just to change 2 of the 4 injectors oh and the other 2 are just as hard. and spark plugs are killing me to! its easily and hour job. i have a local shop fabricating me a top feed rail he is only charging me 400 and 320 for the 850 top feed injectors that is the best way to go. but if your looking to just get OEM products there the best!
    DeatschWerks Top Feed 850cc Fuel Injectors


    RSD Customer 8 years ago
    I was looking for an exhuast for my 07 wagon that wasnt to loud and this exhaust with the HKS downpipe sound sooooo good. It wasnt too loud either but loud enought to hear that sweet boxer sound. I could not be more happier with it. Fitment was perfect but make sure to use a tighter hanger other than stock cause mine rubs a little during idle. Over all this product ROCKS!
    HKS Hi-Power Exhaust


    RSD Customer 8 years ago
    great product! fitment was good. sounds excellent engine and turbo responce inproved. Great downpipe!!
    Invidia V3 Downpipe Divorced Wastegate


    RSD Customer 8 years ago
    I purchased this key and had it cut @ my local Subaru dealership. I own a 2006 WRX and eventhough it says that it does not work with vehicles that are equipped w/ a smart key / chip anti-theft security device there is a way to make it work. You will notice that your ignition will glow green and that means that your security system is on and will not allow you to use your STI key. Simply place your smart key (which you know has that chip in it) in the ignition and turn it then you will notice that the green light will turn off. Now place your STI key in the ignition and place the back area of your chipped key into the ringed area that was once glowingt green while you turn the ignition. Now The car should turn on just fine and not shut off due to the security system. If the car shuts off then you did it wrong. *NOTE* YOU WILL NEED TO CARRY YOUR SMART KEY WITH YOU @ ALL TIMES IN ORDER FOR THIS TO WORK. However in my humble opinion it's more of hassle than it really is worth / time consuming but then again it does make you feel cool to use it lol. All in all this is a great high quality product and I highly recommend it for any one looking for a cool little trinket to add to your vehicle.
    STI Subaru JDM Key


    RSD Customer 8 years ago
    I was a little worried when I bought this because it isn't cheap but I knew I was going to be on my own when it was time to bleed my new brake system. Instructions on the bottle were easy to follow and the system worked as described. The value of the product certainly goes up the more you are bleeding brakes so it would be a great club purchase to pass around to your fellow wrxers.
    Motive Products Import Power Bleeder Kit


    RSD Customer 8 years ago
    Lines look great function great. The retainer clips were not as snug as I would have liked so I used a combination of old and new clips that was a little disappointing. Not sure if that was just me or if that is reality.
    Stoptech Stainless Steel Brake Lines Rear


    RSD Customer 8 years ago
    It looks better in person than the picture. It matches well with the dash. It has great quality and fitment. you could also install warning lights for your gauges with this pod because it already comes predrilled.
    ATI Triple Meter Center Dash Pod


    RSD Customer 8 years ago
    You can install this in about 5 minutes and it looks great.
    Subaru Red Hazard Button


    RSD Customer 8 years ago
    I got the complete set of pads and they are better and cheaper than hawk and oem! quiet and very good bite and they use some of the best materials. i would say these are the best bang for the buck.
    Axxis Ultimates Rear Brake Pads


    RSD Customer 8 years ago
    God Product. Improves ride height over stock. A bit stiff for my liking. a bit bumpy at slow speed. The increased stiffness is very nice at speed though 85MPH plus.
    Prodrive Sti 2004 Spring Kit 2004 Sti


    RSD Customer 8 years ago
    THis is by far the best upgrade that I have made to gain power in my STI. It is super easy to install. I've had mine since Feb of 2007 and have done all of the firmware updates to inlude the addition of the performance timers. The new maps seem to be more fuel efficient and with the addition of the launch control makes driving the STI even more fun. A must have!!!!!
    COBB Tuning AccessPORT w/ Proto Tuning Tool Holder


    RSD Customer 8 years ago
    Ecellent product from Cobb Tuning. This intake is far better than my previous intake. The grid indise the tube truely works and doesn't let the car run rich between shifts. I would definitly recomend this intake to anybody that will be using the accessport
    COBB Tuning Short Ram SF Intake System


    RSD Customer 8 years ago
    Great Downpipe. High Quality product. Gives the car a great sound. Expect more sound in the cabin though. Power gains were very noticable.
    Invidia V2 Downpipe Bellmouth


    RSD Customer 8 years ago
    This downpipe is great!!! Just had it installed along with a upipe and accessport stage 2. Fitment was perfect had no issues with installation. Just make sure you get a new donut gasket becasue the one off the stock downpipe took about a hour to get it off. Overall you won't be disappointed with this product!!!
    COBB Tuning Downpipe Catted Bellmouth


    RSD Customer 8 years ago
    This heat shield adds a nice touch to the engine bay. Much improved over the stock heat shield. The only issue was the installation took much longer than expected. Overall it is a small price to pay to add a nice touch to your engine bay.
    COBB Tuning Turbo Heatshield


    RSD Customer 8 years ago
    Ive had this downpipe on my car for about 5 months now and I love it ... I also have the full turbo back exhaust along with the AP and there is a HUGE power gain .... also Cobb has new maps out all the time great buy for someone starting out and not to sure of what to buy.... only problem is police don't like the noise I make =)
    COBB Tuning Downpipe Catted Bellmouth


    RSD Customer 8 years ago
    Awesome springs! Perfect drop (even wheel gaps and plenty of clearance) Ride is not harsh. greatly improved handling. Work great with stock shocks.
    Prodrive WRX 2002-2003 Spring Kit Impreza WRX/GX 2001-2002


    RSD Customer 8 years ago
    Great Springs! Would be nice if they came with instructions to ease the pain of installing but a simple guild off the internet is not hard to find and made life easier.The install took about 3 hours and i have never done anything like this before. I will need an alignment but others have said they didn't. The Drop is Perfect on my 2002 it took away the large gap in the front and the handling is impressively better. Would recommend these to any one!
    Prodrive WRX 2002-2003 Spring Kit Impreza WRX/GX 2001-2002


    RSD Customer 8 years ago
    i bought the wrong product but rallysport helped me exchange the product in no time :) again amazing service and a quality product! shifts are so much better now that i have the complete kartboy setup!
    Kartboy Shifter Bushings


    RSD Customer 8 years ago
    just installed mine today and love it. installation took no longer than 30 minutes and i didnt even break a sweat! sound very nice and aggressive i'd highly recomend this product to anyone thats looking for a nice cat-back system for their subaru.
    HKS Hi-Power Exhaust


    RSD Customer 8 years ago
    hangers are AWESOME! i used to have a clacking sound in my car and i always assumed it was a blown shock... but after going to the shop i found out it COULD be my muffler hitting the side of my bumper. so i purchased these hangers and haven't heard the clacking since! hangers work beautifully!
    Kartboy Mitsubishi EVO 8 / 9 Exhaust Hangers


    RSD Customer 9 years ago
    Excellent springs perfect ride height drop. Works well with stock dampers. Eliminated dive in turns and while braking. Don't bother with others prodrive knows what they are doing. I beat coilover setups at autocrosses.
    Prodrive WRX 2004+ Spring Kit 2004+ WRX


    RSD Customer 9 years ago
    fitment is the worst Ive ever seen it takes alot of work to get it to bolt right in but once its in it works fine
    Corbeau Seat mounting Base Driver Side


    RSD Customer 9 years ago
    just installed a Cusco OS type strut bar... i was amazed that it fit with out rubbing the TMIC!
    APS Subaru WRX Top Mount Intercooler 02-05 2.0L


    RSD Customer 9 years ago
    just installed on my MY06 wrx along with my APS TMIC !!!! very snug getting it in behind the TMIC but do able and no rubbing once it is in.
    Cusco Front Strut Tower Bar Type OS


    RSD Customer 9 years ago
    Sounds very aggressive and has a nice idle. fit perfect. Great all around product. I just got this exhaust by ups yesterday and I had the old exhaust off and this one installed all in an hour with simple handle tools..
    HKS Hi-Power Exhaust


    RSD Customer 9 years ago
    If you are looking for big time sound...this one is for you! Also comes with pieces to change the pitch with. Looks pretty good under the hood!
    TurboXS Universal RFL Blow Off Valve


    RSD Customer 9 years ago
    i do 11.666s in the 1/4 and i us this alongside a new fuel system
    COBB Tuning AccessPORT w/ Proto Tuning Tool Holder


    RSD Customer 9 years ago
    this is a sweet system I purchased this along with the hks down pipe as well its got a angry roar to it when youre hittin it when Idling still smooth but that sweet ass boxer rumble
    HKS Hi-Power Exhaust


    RSD Customer 9 years ago
    this sounds sweet to my ear's its wicked louad as well and the cool thing is you can change out the fins for diffrent sounds and it also has a recurulation adapter you can choose to use it was kind of a pain in the ass to put on the 06 sti my advice is to take the top mount off then install on
    HKS Subaru WRX / STI Super SQV Blow off Valve 05-06


    RSD Customer 9 years ago
    I bought this and a catless down pipe for my 07 WRX. Make sure you get a silencer because this exhaust is loud(if you\'re worried about that). The power is amazing and the spool time will also increase so watch for over boost.
    HKS Hi-Power Exhaust


    RSD Customer 9 years ago
    I have an 07 WRX this unit stage 2 with a turbo back exhaust will make your car a rocket ship!!
    COBB Tuning AccessPORT w/ Proto Tuning Tool Holder


    RSD Customer 9 years ago
    very nice for dirt road racing. extends past where the OEM plastic peice ends at...
    Beatrush Aluminum Underpanel


    RSD Customer 9 years ago
    I got these for my 04 WRX Wagon. Real easy to install and the car looks and handles great.
    Prodrive WRX 2004+ Spring Kit 2004+ WRX


    RSD Customer 9 years ago
    The HKS Hi-Power Full CatBack Exhaust is by Far the Best Exhaust out on the AfterMarket Exhaust Systems. If you want a exhaust that is not too quiet and loud then this is it it's just PERFECT. This Brings out the TRUE Boxer Tone of your car and Unleashes Beautiful Great Gains of High Horse Power and Torque. Installation is very easy and the Best place to get one is here in RallySportDirect.
    HKS Hi-Power Exhaust


    RSD Customer 9 years ago
    Took my about an hour to install. Fitment was tricky at times but once it's in there it fits perfectly. The ECU seemed to stutter for a few moments while it got used to the new flow rates but so far I haven't had any problems. the sound it makes is amazing and it looks great as well. Rock on APS!
    APS Cold Air Intake


    RSD Customer 9 years ago
    So far I have been thrilled with the performance that the Tein Flex Kit has given me. My 2006 WRX TR is a whole different car now. Bumps in the road are more noticeable and you have to really pay attention to the road so as not to bottom out but anyone buying coilovers should already know this. My car handles ridiculously well now. I'd recommend this kit to anyone
    Tein Flex Coilovers


    RSD Customer 9 years ago
    The nicest sounding cat-back i've heard on an STi yet. Nice deep sound even at high rpm's. Doesn't get high pitched whatsoever. Only problem is that it doesn't bolt up flush against the flange right behind the cat. It will still work without any exhaust leak. I will definitely be ordering the invidia downpipe.
    Invidia N1 Cat Back Exhaust


    RSD Customer 9 years ago
    amazing sound! and very easy to install....no lag turbo. the price is very good compared to the hks ssq
    TurboXS Universal RFL Blow Off Valve


    RSD Customer 9 years ago
    The Cobb 3" WRX STI Cat Back exhaust is a great exhaust for people who want to unleash the sound of the great boxer engine but want to keep a close to stock look. Instillation only took about a half an hour and everything fit perfect.
    COBB Tuning Cat Back Exhaust Stainless Steel


    RSD Customer 9 years ago
    The final clunk killer. No more noise. Rear end feels more planted to the body and there is much less movement. NVH is increased but is not obnoxious. Parts easily unbolt and reinstall. Took me less than 15minutes to do both sides. Lube is your friend.
    Kartboy Rear Diff Crossmember Bushings Standard Set


    RSD Customer 9 years ago
    Worth the price. Removes mushiness from steering imputs for daily driving improvement. Feels and acts much more precise. The install was relatively pain free requiring only the removal of the under cover and unbolting an underbrace to get better access. Don't forget the lube.
    Whiteline Steering Rack Bushings 30mm


    RSD Customer 9 years ago
    Quick way to improve handling but you'll need power tools to install in a reasonable time frame. The provided spacers for the front underframe and bolts did not work the way the instructions said (GTspec.com has instructions for spacer placement and bolt useage) but I made it work by reusing original bolts. Dive under braking and lift during acceleration were decreased. Cornering improvements are only really noticed at higher speeds so this is an excellent upgrade for track days. The only reason I rated this kit a 4 out of 5 is the pathetic attempt at instructions (a single picture no words) and the rear most bolts included with the kit would not mount properly.
    GTSpec Anti Lift Kit Subaru


    RSD Customer 9 years ago
    Shipping was incredibly fast. The product its self is not quite what I had thought it was going to be. But the software for it is amazing and the ease of use is very nice also. I flashed just to stage 1 and what a difference it made. Very nice and very good for a first power mod.
    COBB Tuning AccessPORT w/ Proto Tuning Tool Holder


    RSD Customer 9 years ago
    Installation was a piece of cake everything fit great. Sounds just the way a boxer motor should. I dont really know what the other STI's are running for pipes that I hear but this one sounds really good. For the money what a great buy.
    HKS Hi-Power Exhaust


    RSD Customer 9 years ago
    very clean... when installing it i dont think you need to remove the snaps but the instuctions make it look like you do (they are in jap.)
    Beatrush Radiator Cooling Panel


    RSD Customer 9 years ago
    very clean... when installing it i dont think you need to remove the snaps but the instuctions make it look like you do (they are in jap.)
    Beatrush Radiator Cooling Panel


    RSD Customer 9 years ago
    Excellent product. Easy and clear instructions made this piece fit like a glove. You can really hear the motor suck in the air when you put your foot into it. Nice and clean install.
    K&N Typhoon Short Ram Air Intake System


    RSD Customer 9 years ago
    If you want a nice mellow tone that increases with how much you put your foot into it then this is an excellent choice. The install was a breeze taking about 2 hours with simple hand tools and jack stands. The power gets smoothed throughout the RPM range only noticeable when you look down at the speedometer and you are doing 150+ Kph.
    HKS Hi-Power Exhaust


    RSD Customer 9 years ago
    Great quality in material & craftmanship. Though one hanger bracket was probably a bit off the original location (One of the rubber hangers had to be streched as far as it could go...). Other than that great product. Not too loud & not too aggressive visually either. Just enough to hear the sweet boxer rumble. The slashed tail pipe fits nicely with the bumper curve which created a nice finished look. I'm very happy with the purchase !
    COBB Tuning Cat Back Exhaust Stainless Steel


    RSD Customer 9 years ago
    The base fits the Sparco EVO just fine but it won't jive with the EVO L. You'll have to modify the base of the sidemount to get the EVO L to bolt up. For me I just had to drill an extra hole and it was fine. It seems the hardware was designed with the EVO in mind.
    Sparco Seat Base Driver Side


    RSD Customer 9 years ago
    The base fits the Sparco EVO just fine but it won't jive with the EVO L. You'll have to modify the base of the sidemount to get the EVO L to bolt up. For me I just had to drill an extra hole and it was fine. It seems the hardware was designed with the EVO in mind.
    Sparco Seat Base Passenger Side


    RSD Customer 9 years ago
    Awesome! This seat rocks if it fits you. It seems that the mounting hardware was designed with this seat in mind as everything bolted up perfectly. One thing though is that when installing this seat in a 2005 Subaru WRX STi using the Sparco hardware the "wing" portion of the seat slightly rubs against the pillar. I was lucky that my seating position is such that this wasn't an issue but it definitely limits the range of adjustability.
    Sparco Evo Black Seat


    RSD Customer 9 years ago
    I got one of these seats for my 2005 WRX STi for the passenger. The seat is great and is very comfortable. One thing with this seat is that it won't bolt up to the Sparco hardware without modification. I had to drill 1 hole and it all bolted up fine. Unfortunately when I put the seat in the car the "wing" part was hitting the side of the car a lot. I had to cut off part of the wing with a hacksaw to make it fit but now it's perfect. The cover of the seat is easy to get off and our cheap hacksaw cut through it pretty easily. Overall I'm really happy with this seat but be aware that your mounting hardware probably won't bolt up and modification may be required.
    Sparco SEAT EVO 2 RED Competition


    RSD Customer 9 years ago
    Bought this for my 2004 WRX. It was a very easy install and makes the car soo much smoother. Gets rid of the "04 studder" and even just stage 1 you can feel the power difference especially on top end. I believe its a great buy and will be very handy with future mods.
    COBB Tuning AccessPORT w/ Proto Tuning Tool Holder


    RSD Customer 9 years ago
    I previously ran with a UTEC on my 06 STi. Just comparing base maps (which are not a good measure) the COBB was able to clearly produce a more consistent power band. I am a little disappointed with the quality of AP Manager software but it serves its purpose. The firmware update capability of this product is great except that the unit needs to be unmarried/uninstalled from your car prior to updating. Many of the features are still in work for the AP such as the 0-60 calc hp calculator etc... but overall its a good platform to work from and COBB all around makes some excellent products so I expect only good things for this AP. I've been daily driving and doing some pulls with it and all in all I'm very pleased I don't think you'll be disappointed. Clearly get a ProTune from a reputable tuner though!
    COBB Tuning AccessPORT w/ Proto Tuning Tool Holder


    RSD Customer 9 years ago
    should be called Cusco JDM WRX STI 2006+ catch can...due to the fact that they change the can size to a larger can and so they changed the mounting location away from the battery to right in front of the driver's side wheel well the thing is on US spec cars the "air pump" for emissions resides there! better off just getting a universal can cause this one comes with "specail" hardware for the 06 wrx.
    Cusco .6L Capacity Oil Catch Can


    RSD Customer 9 years ago
    very subtle sound when compared to the hks ssbov... all hardware very professional looking
    APS Blow Off Valve for Top Mount Intercoolers


    RSD Customer 9 years ago
    very clean looking both with the hood open and shut...very big... make sure you get the right one for your car year.
    APS Subaru WRX Top Mount Intercooler 02-05 2.0L


    RSD Customer 9 years ago
    i weigh 215ish and these seats are perfect... 1st race seat that felt like it was made for an adult
    Sparco SEAT EVO 2 RED Competition


    RSD Customer 9 years ago
    very clean... easy to install second person is usefull
    Beatrush Aluminum Underpanel


    RSD Customer 9 years ago
    The difference with this on in place of the stock RSB is like night and day! I have alot more confidence going into the corners now and I would definately reccomend this.
    Cusco Rear Sway Bar 22mm


    RSD Customer 9 years ago
    make sure to up grade your exhaust hangers i use the cobb ones otherwise it will rub.
    APS Subaru 3.5" Race Turboback Exhaust 02-07 WRX & STI


    RSD Customer 9 years ago
    Recently installed on my 02 wrx noticable difference in acceleration need to have ecu retuned due to rich condition but very well worth it when you are able to turn the boost up now safely. Recomend for people looking to build a factory looking rocket
    APS Subaru WRX Top Mount Intercooler 02-05 2.0L


    RSD Customer 9 years ago
    Makes harnesses much easier to wear material is very soft and made nicely!! Fit is great as well as the look.
    Sparco Harness Belt Pad 3 Inch Black


    RSD Customer 9 years ago
    The Tein Flex's are sweet!! They were very easy to install and came with everything needed to install. There is a ton of ajustability on them and with the EDFC unit it only gets better. My only gripe would be the stiffness while driving around town it's not super stiff but you definitly take notice of it.
    Tein Flex Coilovers


    RSD Customer 9 years ago
    sounds very mean lets you hear the turbo spool up.
    APS Subaru 3.5" Race Turboback Exhaust 02-07 WRX & STI


    RSD Customer 9 years ago
    i have a aps 3.5" turbo back and with the cobb stage 2 the car feels really fast... like really fast... and feels very torquey
    COBB Tuning AccessPORT w/ Proto Tuning Tool Holder


    RSD Customer 9 years ago
    Looks nice makes removing the intercooler easier better flow and temps. The Bypass valve hose is hard to get on and isn't the best fit I recommend just leaving the stock bypass hose on cause its not needed.
    Samco 3-Piece Intercooler Hose Kit Black


    RSD Customer 9 years ago
    build quality is excellent the height is perfect and the throws are nice and short. i installed mine with the bushings and the feel is great but when i shift into second gear i can hear noticable synchro noises. if my friend hadn't chucked my stock lever i would have pulled this out two weeks after installing it. that being said my friend also has it and he doesn't have the same problem.
    Kartboy Short Throw Shifter


    RSD Customer 9 years ago
    This swaybar is amazing! If you want better turn-in increased handling and less body roll this is the bar to buy! The bar is a little difficult to install but is well worth the time! Very satisfied!
    Whiteline Front Sway Bar 24mm


    RSD Customer 9 years ago
    This is a great sway bar. It is very easy to install (only took about 15min!!!) and easy to adjust stiffness. I installed front and rear Whiteline swaybars coupled with Cobb Tuning lowering springs. The handling difference is amazing without compromising ride quality! A great investment!
    Whiteline Rear Sway Bar 24mm Adjustable


    RSD Customer 9 years ago
    it looks good. and it has 2 size options for different gauges but the plastic tooth like snap in parts are weak and its almost impossible to get it out once u put it in. in the end ur paying over 100 bucks for a 2$ piece of plastic.
    ATI Triple Meter Center Dash Pod


    RSD Customer 9 years ago
    Pictures do not do this thing justice It has a OEM Quality fit and finish to it i used this with 60MM Defi BF Amber Gauges to match the Interior in my STI. They come setup to install 52MM gauges inside of it you can take a pair of pliers grab the perforated ring and easily pull out the material to allow the 60MM Gauges to slide right in.
    ATI Triple Meter Center Dash Pod


    RSD Customer 9 years ago
    Includes hard rubber instead of poly bushing. Means it will NEVER squeak and you NEVER have to grease it. Most people should get the 22mm version.
    Cusco Front Sway Bar 21mm


    RSD Customer 9 years ago
    If you are buying a Cusco front swaybar you should just get this 22mm. There are very few people who would benefit from the other optional 21mm. Like all cusco parts the fitment is perfect and the quality is extremely good. Cusco bars include hard rubber self-lubricating bushings instead of inferior polyurethane. The main difference is that you never grease a cusco bushing and it never squeaks.
    Cusco Front Sway Bar 22mm


    RSD Customer 9 years ago
    Decent quality camber bolt for use in the stock lower holes of the front struts or the stock upper holes in the rear. They are a very tight fit by design and since they have less clamping force than a stock bolt they should really only be installed in their MAXIMUM setting and then use the beefier OE bolt to trim the setting exactly. I use them and like them.
    SPC Camber Bolts EZ CAM XR 14MM


    RSD Customer 9 years ago
    Installed one on an 04STi and the impression is that it's a clutch of similar quality to OE but with a markedly stiffer pedal effort and a grabbier feel - about what you expect from a sport clutch. Installed along with a light flywheel - gave the car a very difficult from-a-stop behavior.
    ACT Heavy Duty Performance Street Disc Clutch Kit


    RSD Customer 9 years ago
    Installed this on an 04STi last week. Product is SIGNIFICANTLY lighter than stock and thus makes starting from a stop more challenging but everywhere else it's an absolute joy. Installs the same as any other flywheel and fits perfectly.
    ACT StreetLite Flywheel


    RSD Customer 9 years ago
    PITA install not really worth it IMHO. I got them as a beta tester and went through the drudgery of installing them... for what? More noise and rattling of the shifter into the passenger compartment. Made the shifter more notchy but it's not a feel that I like.
    Turn In Concepts Shift Linkage Bushings


    RSD Customer 9 years ago
    Install on this system is extremely easy. The only realy chore is removing the necessary parts in order to access the up-pipe. The weight savings is excellent. USE the heat sheild that came with the up-pipe and put it on extremely snug. Some cutting in areas the sheilding will not bend will be necessary. After they are installed the sound in amazing. Tourqe and throttle response goes up. The only bad part about the headers and TBE is the realization that your turbo is to small.
    APS Subaru Equal Length Header STI Kit


    RSD Customer 9 years ago
    This is an excellent choice for a high quality TBE that will last as long as your suby. The assembly is straightforward and displays nothing short of top quality construction. Trimming the factory heat sheild is easy make sure you use it. The extra heatsheild on the cast collector is a good addition. The exhaust note is perfect and almost inaudible after the car is warm with a nice throaty sound at full throttle.
    APS 3 Inch Turboback Exhaust


    RSD Customer 9 years ago
    Big driveability improvement. Much better power transfer. Feels much more solid. They reduced a lot of drivetrain noise during hard acceleration. I didn't install them myself so I can't comment on ease of install.
    Turn In Concepts Rear Diff Mount Bushings Race


    RSD Customer 9 years ago
    Good pads so far (about 3000mi). Lowered dust levels (wheels stay clean for much longer) but they do make some dust. Occasional sqeaks but not nearly like the OE Brembo pads. Pedal feel was improved and installation was a cinch. I will use a different pad for track days. For the price they are the best for daily street driving.
    Hawk HPS Front Brake Pads


    RSD Customer 9 years ago
    More difficult to install than the front bushings but a good mod none the less. Make sure to use lithium grease. Much improved shifter feeling and gear change.
    Kartboy Rear Shifter Bushing


    RSD Customer 9 years ago
    Much improved feel for shifting. Tight and precise. Make sure you use lithium grease. Install was a snap but I recommend doing it on a lift (where I did mine) because of the location under the center of the car. I also installed a rear shifter bushing at the same time (Kartboy) to knock out the shifter upgrades all at the same time. I highly recommend this product for improving the daily driveability of your car.
    Kartboy Shifter Bushings Subaru STI 2004-2015 / Legacy Spec.B 2007-2009


    RSD Customer 9 years ago
    I used this for the install on my DEFI Amber BF Gauges I installed Boost EGT and Oil Pressure. On my 2005 STI i was able to mount this to the top side of my glove box so its out of the way and is a very clean installation. The peak function with the unit is great and definately comes in handy. I have had it warn me before when my boost spikes and when my EGT's get a little warm. All and all i think these are the best gauges on the market that money can buy.
    Defi Link Control Unit Ver. 2


    RSD Customer 9 years ago
    I purchased this for use with my Defi BF Amber Oil Pressure Gauge. I wasn't to excited about drilling into the block or the oil pan and this fit perfectly on my 2005 STI. It makes the oil filter sit down about another 1" but it's still up and out of the way. Definately worth the money if you are installing any oil temp or pressure gauge.
    Greddy Oil Sandwich Block Adapter


    RSD Customer 9 years ago
    Installed this in my link system with boost and oil pressure. EGT requires the removal of the exhaust manifold to be able to drill/tap into it and put the probe in i have had some machining expierience so it's not that hard of a job but if you havn't ever done it before it might not be a bad idea to have it professionally installed. Just make sure you get all the metal shavings out after you drill the hole.
    Defi BF Amber Exhaust Gas Temperature Gauge Imperial 60mm 400-2000F


    RSD Customer 9 years ago
    I installed this with my defi link system and used the greddy oil sandwich adaptor to install it. It made the oil filter sit a bit low but for not having to drill/tap the engine block or the oil pan it is well worth it. Gauge reads like it should i can tell a difference in oil pressure when the oil is cold and hot and when it's new versus when it's old. Pretty cool stuff.
    Defi BF Amber Oil Pressure Gauge Imperial 60MM 0-140PSI


    RSD Customer 9 years ago
    Installed these injectors with my SR56 turbo swap. I have really been pleased with the flow that these offer. One thing to look out for is when installing these the factory injector clips do not plug directly into these injectors. They do come with new clips that you have to switch out on the factory side. Not a huge deal but i didn't know this before purchasing. After i got the clips switched injectors worked without a problem.
    Power Enterprise Side Feed 850cc Fuel Injector


    RSD Customer 9 years ago
    Used this in conjuction with my APS DR725 Front Mount Intercooler. Fits nicely and tucks right in the fender like it's supposed to. The red finish on it matches the finish on the intake manifold on the STI. It even has the same texture. The filter is a K&N i have cleaned it a few times now it seems to get pretty dirty in the fender as it is.
    APS Cold Air Intake


    RSD Customer 9 years ago
    I installed this FMIC Kit on my 2005 STI. If you have never owned a APS Product I feel sorry for you. Thier product quality is absolutely amazing. The fit and finish of my kit was top notch. The only complaint that i have with it is it\'s almost too big. I have this setup on my SR56 i\'m getting plenty of power but the issue is with heat. The car will overheat during the summer months when I\'m racing the car on the track. I was able to get the problem under control with a Koyo Radiator and a Process West Oil cooler but i have spoke to guys that have the DR 525 and they don\'t seem to suffer from the heat soaking issue. The product quality on this is top notch but because of the oversize core issue i\'m going to give it a 4 out of 5.
    APS Subaru DR725 Silver Front Mount Intercooler 02-07 WRX & STI


    RSD Customer 9 years ago
    I really like the power that this turbo delivers with my APS 3.5" System and my APS DR725 I get 380WHP. Turbo Spools by 4300 RPM. Right now the car is tuned at 19PSI but it's capable of 25PSI +. If you are interested in this turbo you will need to make sure that you have a Front Mount Intercooler Fuel Injectors Fuel Pump and some sort of Engine Mangement Lined up. I went with the PE850CC Fuel Injectors and the walbro fuel pump kit. All and all i would recomend this turbo to anyone that is building a daily driven street car that wants quite a bit more HP out of it.
    APS SR56 Ball Bearing Turbo


    RSD Customer 9 years ago
    04STI-INVIDIA G200 CatBack-Stock DP/UP-upgraded SPT exh hanger Beautiful product. It is very large but it makes a sound that is not only more pronounced at high rpm but deep and bubbly on the low end. No droning at highway speeds w/o silencer (which is included but not necessary). It does not touch the rear cover (I did install stiffer hangers) and the stainless tucks up underneath the car very nicely (does not hang low like some systems). The 3" piping had minimal bends and snuggly mounted to the stock cat with the provided hardware. I am completely satisfied with my investment.
    Invidia G200 Cat Back Exhaust Titanium Tip


    RSD Customer 9 years ago
    I had the short ram air intake prior to this product and I love APS (see my other review of the 3" TBE). I asked for this as a gift from my fiancee. She picked it up for me and I was very pleased again with quality. Fitment into the fender area was a little tricky but given some twists and pushing it slid into place. The diameter of the intake is VERY close to the size of the port in the fender. It does fit but just work with it. The sound is nice. You wont notice a performance gain unless you have the other appropriate modifications and in reality this should only be used if you have or plan on having a FMIC (an APS). The filter element will not be in the easiest place for you to clean/check it. Just make sure you do on regular intervals. Thats a vital component of your car!
    APS Cold Air Intake


    RSD Customer 9 years ago
    I purchased Tein because of their great reputation low cost rebuilds and first hand knowledge from a friend. Tein also is just up the street from me so going there is also easier. The product quality was very high. I had these installed on my old 04 WRX. The ride quality as expected for daily driving is rough and you can hit your head on the head liner if you hit the right bumps. Trust me on that one. Track day/setup with these was superb and with the corner balancing I got I couldn't have been happier. In hall honesty I personally never noticed a lot of change by adjusting the dampening but part of that may have been because I was not pushing them as hard as possible. If you do not plan on tracking the car or doing auto-cross I wouldnt recommend them. I'd recommend them again and I am considering buying these for my 06 STI.
    Tein Flex Coilovers


    RSD Customer 9 years ago
    The quality of the APS products was the #1 reason for purchasing this TBE. I have yet to be disappointed with this product even after around 3 years and two cars (04WRX and 06STI). The fitment is clearly an A+ and only requires a simple bit of trimming of the exhaust divorcing wall in the collector which APS says in their instructions is needed for the USDM. Its ductile iron so its not that hard to trim/grind. The look of product on the car is great because it does not scream ticket unless your WOT :-) I did have a problem with the available high flow CAT with rubbing and vibration against the firewall. This was remedied by doing some simply bending and application of a firewall padding/heat tape. I'd recommend the APS line anytime.
    APS 3 Inch Turboback Exhaust


    RSD Customer 9 years ago
    I bought this system after reviewing the noise level and backpressure specs posted on the APS website. What I noted was that this exhaust catless was quieter than the R1 and R8 versions with thier cat installed but had lower backpressure. This means more power and less noise. I was rewarded with a much more subtle exhaust note that was loud only when getting on it and civil the rest of the time. I ended up making 321whp and 360wtq on the stock turbo with it so there definitely wasn't a restriction at stock turbo levels. Product has excellent finish and fitment and includes all the hardware you could possibly need. This is definitely my pick as the best aftermarket exhaust available for a stock-location single-scroll turbo WRX/STI.
    APS Subaru 2.5" Single Tip Turboback Exhaust 02-07 WRX& STI


    RSD Customer 9 years ago
    This is a great intake! The sound and performance are awesome. A bit of a tight fit and a lil tricky to install but am overly satisfied. I've noticed some slight noise during startup when the engine shutters due to the fit being so 'perfect'. With little work the noise could be fixed didn't take me long to solve the problem.
    APS Cold Air Intake


    RSD Customer 9 years ago
    I bought the Turbo XS turbo-back exhaust from RSD and it as great. But I accidentally bumped the exhaust and the orginal gasket had a problem. I told RSD about it and they gave me this gasket - and It's been great! Haven't had any problems since.
    Remflex 3 inch 2 Bolt Exhaust Gasket


    RSD Customer 9 years ago
    I picked one of these up about two years ago and am still amazed. With the boxer engine certain parts or all should be heat wrapped. This will smooth out that chugy lumpy idleand exhaust tone. Turn your subaru into WRC car sound seriously. Every other subaru owner I decimate makes a point to find out why my car sounds and feels so much smoother yet distinct from most bolt on untuned polluters.
    Invidia Equal Length Exhaust Manifold


    RSD Customer 9 years ago
    This uppipe is fantastic for an otherwise stock engine. I would recommend light supporting mods decat downpipe. However as your vehicle level increases this piece can translate to 6 hours dyno time. Do your reasearch
    HKS Uppipe


    RSD Customer 9 years ago
    I have been using this for about a year and a half. Smooth mellow tone translates into raspy fire breather at top end/full throttle. This exhaust is very user friendly and not annoying at crusing/highway speeds. The muffler is angled for high horsepower apps with unburnt fuel remaining in the system. An added bonus if you keep it clean and run it for about a year - 50000 the entire piping blues to a very attractive golden purple hue show stopper.
    HKS Carbon-Ti Cat Back Exhaust


    RSD Customer 9 years ago
    I have been using this for 14 months the only thing is you need professional tuning or some form of engine management or boost creep can end up harming your engine.
    Invidia Downpipe Catted Divorced Wastegate


    RSD Customer 9 years ago
    As with most any Cusco procuct fit and finish are exquisite. over and understeer can be controlled in 20 minutes with good mechanical ability
    Cusco Rear Adjustable Sway Bar 22mm


    RSD Customer 9 years ago
    If you have a proble with corner push/ understeering I highly reccomend these two years later 70000 miles and the bushings are extremely firm still And the blue sets off your undercarriage.
    Cusco Front Sway Bar 22mm


    RSD Customer 9 years ago
    Safely and accurately raise the boiling point of the coolant in your engine Ialso have the STI 1.3 bar however my fans kick on 5 degrees celsius later with the ARC. Monitored by defi water temp and HKS fan controller
    ARC 1.3 Bar Radiator Cap Type A


    RSD Customer 9 years ago
    I have been rolling on these for about 14 months. If you do not already know every part of this coilover is independently adjustablewhich can be a blessing or a curse depending on the person doing it. The suspension just bolted in easily we set the front at negative 1 rear the same to compensate for 18x 8.5 inch gram lights. that small adjustment coupled by an at home alignment improved my tires life over ten thousand additional miles. There are only 5 numbers on the controller but actually 6 settings 2 number ones. Compared to Tein and Tanabe Adjustable suspensions all of which I have used there is a noticeable difference in the fact that these have huge amounts of stroke and the spring perch and preload are all adjustable to compensate for your driving style. From Solo2 to Time Attack to some Snowplowing action you are going to wish you had more cars to put these on.
    Cusco CP ZERO2E, PILLOWBALL, GDA, WRX


    RSD Customer 9 years ago
    night and day difference if you are switching from stock
    Cusco Engine/ Transmission Mount


    RSD Customer 9 years ago
    I have been running the V-mount for about 10 months now and absolutely love it. I would reccommend that the installer have moderate to high fabrication skills. I never had a top mount but this is much more effecient than than the Perrin or APS front mounted intercooler not that either of those are a bad choice. Do not forget if you are a street warrior to spend the extra five hundred dollars on the air conditioning accessories. My vehicle is highly modified right down to the engine block itself and after six hundred miles on the freeway in 112 plus degree weather you can grab the throttle body charge pipe and only wish the store sold beers that cold. In closing if you are running a factory turbo do not forget to buy a 90 degree silicon coupler from Hose techniques or it will be a nightmare. Finally Thank You Power Enterprise for making it and I had to get mine from their america president as prototype so Thank You Rally Sport Direct for stocking an extremely expensive seldom know Real Race Car Part. By the way I am sponsored and mine cost near the same price.
    Power Enterprise Cool Power V (V Mount Intercooler KitSTI)


    RSD Customer 9 years ago
    I installed this in about 30 min or so. The instructions COBB sends these with are pretty detailed to it makes it super easy to get it going. I just chose the map I wanted for my setup. They even have a detailed list of what you need to run that map on the AP. It loaded right up and I had no install errors. It did not come with the 1/4mile and fuel mileage features as they said. But COBB says they will be out some time this month (January). The digital gauges feature is nice because I dont have a boost gauge. I can look at live boost RPMs MPH Volts ect. Im really happy I went with this AP rather than the first version. It was a good buy.
    COBB Tuning AccessPORT w/ Proto Tuning Tool Holder


    RSD Customer 9 years ago
    I am really impressed with this Jacket! All of the logos are right on and not to mention that people look at it and say cool when I wear it out. Its very comfortable and you can move really well with it driving. I hope Sparco comes out with the 2006 Jacket that they wore on the WRC Rallies.
    Sparco Subaru Replica Jacket Large


    RSD Customer 9 years ago
    Added F/R Axxis Ultimate pads on 2002 [prod. date 07/01] WRX together with F/R SS lines F Centric/Stoptech slotted rotors and ATE Super Blue Fluid. I like these pads for their performance and their price is reasonable. After 600 miles they do not squeak at all. 4/5 because I can only compare with: OEM and Stillen pads. I will try Hawk HPS next. Thanks RSD!
    Axxis Ultimates Rear Brake Pads


    RSD Customer 9 years ago
    Added F/R Axxis Ultimate pads on 2002 [prod. date 07/01] WRX together with F/R SS lines F Centric/Stoptech slotted rotors and ATE Super Blue Fluid. I like these pads for their performance and their price is reasonable. After 600 miles they do not squeak at all. 4/5 because I can only compare with: OEM and Stillen pads. I will try Hawk HPS next. Thanks RSD!
    Axxis Ultimates Front Brake Pads

Questions

Answers

Images