Tomei Equal Length Exhaust Manifold

Part #: TOM 193105
( 67 reviews )

$711.00


MSRP: $790.00

QUALIFIES FOR FREE SHIPPING!

Free Shipping


Free Shipping offer applies to orders over $200.00 to the 48 states via UPS Ground or USPS Priority.
Offer Excludes shipments to Alaska, Hawaii and Military Boxes. Items that are too large to ship via UPS or USPS are excluded from this offer.
Please read more on our full shipping policy HERE


   In Stock: Ships the Same Day
Return Policy | Shipping


CONFIRM FITMENT


RallySport Guarantee - 30 Days


Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.

RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.

The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.



SPECS


Brand: Tomei
Includes Catalytic Converter: No
Installation Hardware Included: Yes
Manifold Design: Equal Length
Piping Coating: No
Piping Flex Joint: No
Piping Material: 304 Stainless Steel
Mfgr. Warranty: No Warranty
Return Policy:

RallySport Guarantee - 30 Days


Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.

RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.

The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
RallySport Guarantee
  INSTALLATION INSTRUCTIONS

CONFIRMED FITMENT


Subaru Impreza
WRX STI 2004, 2005, 2006, 2007WRX STI Limited 2007WRX STI Hatchback 2008, 2009, 2010, 2011, 2012, 2013, 2014WRX STI Special Edition Hatchback 2010WRX STI Limited Sedan 2011, 2012, 2013, 2014WRX STI Limited Hatchback 2011, 2012, 2013, 2014WRX STI Sedan 2011, 2012, 2013, 2014WRX Sedan 2008, 2009, 2010, 2011, 2012, 2013, 2014WRX Hatchback 2008, 2009, 2010, 2011, 2012, 2013, 2014WRX Premium Sedan 2010, 2011, 2012, 2013, 2014WRX Premium Hatchback 2010, 2011, 2012, 2013, 2014WRX Limited Sedan 2010, 2011, 2012, 2013, 2014WRX Limited Hatchback 2010, 2011, 2012, 2013, 20142.5 GT Sedan 2009, 20102.5 GT Hatchback 2009, 2010
Subaru WRX STI
Base 2015, 2016Limited 2015, 2016Launch Edition 2015


The Tomei Equal Length Exhaust Manifold was designed to get optimal performance gains for your 2004-2015 STI/2008-2014 WRX. These headers are an equal length, 4-2-1 designed to flow exhaust gases more efficiently through the power band.

Designed with quality at the highest priority, these manifolds are made using 2.5mm SUS304 stainless steel to give you a lifetime of performance. The header will come provided with hardware, gaskets, metal zip ties, uppipe, and heat wrap to make for a ready and complete installation. 


REVIEWS ( 67 )

OVERALL 5

100%
5 STAR
4 STAR
3 STAR
2 STAR
1 STAR
Verified Purchase
Smooth it Out
Bboy777 9 days ago
I had this header installed conjunction with other performance parts and a Pro-Tune so I can't state what the power increase is with the header by itself. Slow speed drive ability and mid to high RPM power is better; I'm sure the header helped. My header is ceramic coated (previous review) and the under hood temps are cooler. I can comment on the sound; I like it! With the Cobb turbo back it sounds a lil' like a Evo but deeper and a little raspy. I think it sounds "Classy".

Verified Purchase
Excellent Product. Easy Installation
Pats2015Sti 20 days ago
These headers are a great buy, especially if like me your a little overly concerned about ring land failure, which typically occurs on cylinder #4, due to excess heat that is not able to be efficiently removed because of the stock unequal length headers. Yes you do loose approximately 80% of the Subaru rumble, but in my opinion 80% is better than a 100%, due to a ring land failure. I wrapped these headers using the Dei 2" heat wrap and it was a bit of a pain in the @$$, but the end result is well worth it and 6 months later with a pro tune and multiple other stage 3 products, my car is alive and running excellent. In the future with bigger engine builds I will most likely invest in some of the more expensive higher end headers, however, these are a great buy and excellent quality.
Verified Purchase
Tomei ELH
Ian 30 days ago
Not that bad with the right tools, a friend, and a lift. Wasn't a big fan of the Allen key bolts that held the up pipe to the headers. I didn't heat wrap mine, hoping they will last longer that way. It's pretty straight foward if you've ever been inderneath the car before. Mock it all up and then tighten. Get extra downpipe and donut gaskets so you can take the downpipe off and check to make sure the up pipe is tight still after a week or so. I had to adjust mine out a little bit to fit. Okay, so it's louder. It sounds like a raspy Honda a little because the drone is gone. Same difference at highway speeds since the overall volume increase. I'm glad I did it, feel a little more low end torque on the butt dyno, plus hopefully it's better for the engine than the stock UEL. Paired with my nameless turbo back I'm sure everyone on my street hates me. Cold starts are extra loud.
Verified Purchase
Ceramic Coating
Bboy777 1 month ago
My header & up-pipe were coated new, inside & out, by Applied Plastic Coatings in Colorado (up-pipe not pictured) The coating & curing was done in a week, plus 3 days to ship to me. $185 plus shipping to your address. I haven't driven the car yet so I can't rate the performance or sound yet.

Verified Purchase
Tomei EL
Mopsycho1 3 months ago
Hey I'm building my 05' STI for superior performance and you must eliminate weak link components and systems! This is why I chose Tomei EL header , the quality level is so high that it is like a functional art piece! My dog even likes it,the way the primary's flow into the collectors is another reason I chose this system , 4 me the price did not factor into my choice ,however dealing with RSD is always a gr8 way to make sure u get the best value and top customer service 4 sure. The install was very easy but I only used the supplied exhaust wrap on the up pipe and a portion of the down pipe as it is a bit thick to wrap the tubes individually I used 50' of DEI titanium lava wrap for the header. Thanx RSD & TOMEI

VIEW ALL REVIEWS POST A REVIEW / PHOTO / VIDEO

QUESTIONS & ANSWERS (87)

  • AnswerQ: Fitment  KronosLGT 10 days ago

    Will it fit a 2005 subaru legacy gt?


    • A: No this is not confirmed to fit your car.


      Chris W. 6 days ago


  • AnswerQ: Fitment  kyle_sti03 22 days ago

    Will this fit a jdm ej20?


    • A: Unfortunately, we can only confirm fitment for USDM vehicles.


      Brady R 21 days ago


  • AnswerQ: coating  xavierdorfman08631 24 days ago

    Hi, do you propose a coating option ? here in France it's not easy to do... thanks xav


    • A: We unfortunately do not offer a coating option. Sorry for the inconvenience.


      Tyler.G 19 days ago


  • AnswerQ: Noise   Emart 1 month ago

    I plan to put a tomei expreme downpipe and a Cobb catback in my 2012 sti hatch. If I put this header, how affect the noise of the exhaust?


    • A: Going to equal length should actually make your exhaust a little quieter and have a bit less drone. It will also take away the boxer rumble and make your car sound more like an Evo or more typical 4 cylinder.


      Josh P. 30 days ago


  • AnswerQ: Fitment 04 forester xt.   avenditti2461659 1 month ago

    Why is this listed as it would not fit my 04 forester xt but the tomei unequal length will fit? They should both fit no? Thank you


    • A: No, there will be compatibility issues with your stock oil pan. An STI oil pan and oil pickup would be needed to run this header.


      Josh P. 1 month ago


VIEW ALL Q & A ASK A QUESTION